Questions

Al descargar la nueva version el CRW sigue el antiguo y no el 15 aunque me dice que esta actualizado. Como lo puedo solucionar? 

   Paid for photo CC all year long. Finally go to use Camera Raw (what i've always used to edit photos) at the end of the year now. I edit some photos and when I saved them to .jpg they had some weird messing up of the colors. Atleast on my MacBook screen and iPhone. I realized it saved in Adobe RGB and so I switched it to srgb and then tried Mac rgb. All of them had the same problem. Mostly solid colors that ended up with blotches and a mix of color. I've. Never had this problem before ever with older versions and it makes my images look noisy and bad quality. Has anyone else had this problem or know of any solutions? I'm so frustrated that my drive to edit photos was finally awakened only to be squashed by an un-talked about error in this program that has a monopoly on photo editing. Please help me 🙏(Ps. Just to clarify these images do not look like this when I zoom in on the edit in camera raw)

Hello! I would like to create and sell a preset for Lightroom. We build on the camera profiles that Adobe Camera Raw (DCP-Files) software provides. We add tone curves etc. Now my question is whether this is OK for licensing reasons. I can't find anything on the Adobe website.Can anyone help me?Thank youTom

Post moved to the Adobe Camera Raw threads by Moderator     I have worked for many years with  Camera RAW and used it to correct known lens defects based on profiles supplied by the manufacturer (Canon).  With the new 2023 Camera RAW when I select "Optics / Profile", I get an error message in small type: "Unable to load lens profile" and hence no correction.  The Setup selection is "Defailt".

Presets saved in Camera Raw 15.0 are not preserving the actual data, seemingly at random. For example, I created some presets of some subtle color adjustments for studio work and when applied, the presets are remove all saturation and greatly increase the contrast, rending the images high contrast black and white. Not at all what I need for a project I need to get done — very frustrating. I quite and tried again and found it was changing every parameter under the basic column, even items I didn't adjust.See below for an example. The settings on the left are what was saved as a preset. The settings on the right are what results. (other paramters are affected too.) They should be identical.In its current state, this is not at all useful and is an impediment to getting work done. I've downgraded back to Camera Raw 14.5, which exhibits none of these issues, but doesn't like it when I touch the presets I created in 15. I'm running a 2020 iMac 5K with OS 12.6 and 64GB of ram. Photoshop

The ACR profile Adobe Monochrome (profile dropdown menu) isn't giving me neutral black & white from a color .DNG image i.e. equal RGB values.I checked the B&W Mixer and Clor Gradients to make sure all are 0 & no saturation. Now here is the really confusing part - sometimes it does provide a neutral RGB /Black & white image. I don't know why it does sometimes and doesn't at other times?I know there are other presets in ACR like Portraits B&W and Style B&W Any ideas. What am I missing ?Thanks(apologies if this post appears more than once. I am not seeing it after hitting the post button)

Hi guys, I have a question, can I make subject selection or eyes, mouth etc… using ACR through an action or script?Yesterday I updated my Lightroom and ACR and found amazing selection functions, I tried to write a script but to no avail.Does anyone know if it is possible to automatically update the subject selection within a script for acr?

    I bought my new camera Sony A7R3A(screen-improved version of A7R3) last week which used the same sensor and processor as A7R3.    But I can not open the ARW files to Photoshop with Camera Raw 13.2. I tried it in Lightroom 10.2 with ACR 13.2, but it can open neither.     After searching it in the users' group of Sony A7R3A, I found that all our ACR users cannot open RAW files currently. The solution they chose was to import the RAW files into the SONY official software and convert it to TIF so that we can edit them in Photoshop. It is inconvenient and most importantly it damages the quality of images.  When did you guys upgrade the ACR to support A7R3A and A7R4A by just adding one line of code of these two camera model names?  😞

i use photoshop cc 2019. When i open raw file, film strip gets to me.how can i remove acr film strip?

Using latest ACR to edit image, unable to bring it into PS due to error. See messages at 9 and 14 seconds in MOV file. When I removed the Healing Brush edit, I could import the file into PS.

Archivos X3F Adobe Camera Raw y Lightroom ha dejado de ser compatible. En las versiones actuales de Camera Raw no puedo abrir mis archivos X3F de mi SIGMA DP3 Merrill, como puedo procesar esos archivos que antiguamente si que rean compatibles... Puedo tener instalada una version antigua para poder procesarlos? GRacias

Hello, Having just updated my Windows 10 laptop to the 2023 versions of PS & ACR, after processing a RAW file in ACR using any of the 3 new tabs (select Object, Sky or Subject) the files just will not open in PS. I don't know what I am doing wrong as I'm using ACR in just the same way before it was updated. If I don't use any of those 3 tabs & use the other masking tools in ACR the file opens just fine in PS.Please help!

Camera Raw 15 won't display my custom camera profiles (Windows 10).  I just updated to Camera Raw 15, and it did not preserve my custom camera profiles in the process.  Moreover, I cannot get it to display those profiles after importing them.  The import profiles function reports that they have already been imported, but they are NOT displayed in the custom profiles dialog.  I have followed the instructions at adobe.com for adding and importing custom profiles, and I have restarted Bridge, Photoshop, and the entire computer multiple times, but nothing works to allow me to use my custom profiles, which I need to process raw files from my infrared converted cameras.    I an using the latest versions of Bridge (13.0) and Photoshop (24.0), but apparently I need to revert to earlier versions of these and Camera Raw to use my custom camera profiles.  Please help!!

Today after editing my photos in ACR (updated) I saved all my RAW files to Jpeg. But after saving less than 10% of them my PC restarted.  Tried to save again and it restarted again. This used to happen months ago but  without any intervention it turned back to normal. Now it is happening again. Luckily before I clicked save images (around 100) I exported XMP files so I didn't loose my entire job. After many attempts I successfully saved my images when I turned off using graphic card acceleration.What may be happening?My pc specs: Intel® Core™ i7-9800X CPU @ 3.80GHzASrock X299 Taichi XENVIDIA GeForce RTX 207064 Gb RAM.PSU Corsair RM750xWindows 10 Pro 64 bitsPSU RM750 Thank you! 

When I create a new profile and save it in ACR, everything is fine, but when I create another profile, the group automatically disappears, forcing me to create another. It's very frustrating. I don't know what to do, I looked everywhere how to solve it but found nothing.

An image is captured using the camera manufactor's flash with the flash selection chosen in the camera temperature settings. When openned in Bridge the image file indicates that flash was used (1.jpg). When the image is openned in Camera Raw the color temperature is As Shot 6150* and +1 Tint (2.jpg). There is usually an unpleasant color to a persons face at 6,150* +1 Tint. The Camera Raw color selecor is changed to Flash which is 5,500* 0 Tint (3.jpg). The colors look normal. Is there a way to make Camera Raw recognize the Flash setting the same way that Bridge recognizes it?

Hi guys, I have a question, can I make subject selection or eyes, mouth etc… using ACR through an action or script?Yesterday I updated my Lightroom and ACR and found amazing selection functions, I tried to write a script but to no avail.Does anyone know if it is possible to automatically update the subject selection within a script for acr?

Problem:1.- In Bridge open a file in Camera Raw2.- Now push either the OPEN, OPEN AS OBJECT, OPEN AS COPY button and NOTHIG OCCUR   UPDATE: Now it actually opens Photoshop BUT instead of opening PS24 it opens PS24.1 (beta)

The Adobe dng converter downsizes file dimensions by 6x when I convert ARW filesis there a fix?? 

The toolbar that used to be on top on the left is now on the right side.   Is there a way to move it back?  I have low vision and it is hard for me to see the toolbard on the right side.  Thanks 

Me aparece desactivado el link para camera Raw, que puedo hacer ???

I have installed adobe bridge on my imac and macbook pro. when I use select subject mask tool on my imac, it work fine. but with the same photo try on my macbook pro it mask very poorly.  I have reinstalled the mac os but it did't work. so I did mac facotry reset and reinstalled the bridge but still doesn't work.  I have talked to the adobe customer servise, they couldn't find the solution. does any one know how to fix?

Hi all, There appears to be an issue with my .XMP sidecars not applying to my raw images. The process has always been seamless for me. Open all my images into photoshops raw window, make my edits, and then those edits are saved as the .xmp so I always have each images edit saved. I went to open my images today, and all my sliders are set back to 0, even though each image I have edited still shows an .XMP file next to each one as if the edit was saved. Can anyone provide some insight as to what might be going on? Thank you so much! I'm using the most current versions of all Adobe apps and am running Mac OS 11.6.8. I'll attach a couple screen shots as well to try to help. 

Hi folks,it feels wierd but something that should be very easy is not.Is there still a way to load XMP presets into ACR and show them as a separate folder instead of accessing them from the User Presets folder in Acr?I tried both loading them from Acr and pasting them in the Settings folder (osx).Thanks.

When someone sends me an NEF file along with its sidecar XMP file, the changes recorded in that XMP don't show up in ACR.My own NEF and XMP files load fine...I can load that sent file in Lighroom and the changes will show (crop, lens profiles, exposure, etc.)Any suggestions?