Questions

Looking for a little assistance if possible. Trying to help out a friend whose wedding photographer seemingly had a corrupt card while shooting. The images exist - I just can't open them. I've used File Scavenger to see if there was anything hidden on the card, but it didn't find anything useful. At this point, I can see the files on the card. What's odd is that I see a "like" file by the same name but starting with a period and then an underscore. These files are mostly in the 4KB range, whereas the CR3 files are much larger. I'm guessing the card is corrupt or that there is/was a process that sees the ._xxx file as a cached file temporarily before it "releases" the full raw file. Not sure - but I haven't figured out a solution yet. Since they're wedding photos, I'd like to give it the ol' college try. Also, I've tried inserting the card back into another Canon camera to see if I could view the images - I could not. I took a few additional RAW shots and could see t

I would like to suggest an important improvement to the Denoise AI workflow in Camera Raw and Lightroom. Currently, if Denoise AI is applied after other edits (curves, masks, color adjustments, lens corrections, etc.), the entire pipeline is recalculated from the RAW file, resulting in significantly slower processing times—especially with high-resolution files (50–60 MP). A manual workaround already exists and works very well:1. Copy all current adjustments.2. Reset the RAW to its original state (no edits, clean raw file).3. Apply Denoise AI (much faster this way).4. Paste back the adjustments. This produces identical results but completes in a fraction of the time.It would be extremely helpful if Camera Raw could perform this optimization automatically. For example, the software could: - Temporarily store the user’s adjustments- Apply Denoise AI on a clean RAW- Reapply the adjustments on the new DNG- Automatically refresh masks and adjustments This would massively improve the user exp

After upgrading from PS 2025 and CameraRaw 17 to the current version PS 2026 / v 27.1 + CameraRaw v 18.0I am unable to import custom *.dcp camera profiles created in CameraRaw.The profiles are all greyed out when browsing the containing folders.How can this be solved?Thank you.

Camera Raw 18 been crashing with RX580. as a work around I was requested to roll back to ver 17.Surely this is a known issue.  Really hope there will be an update for Camera Raw 18 soon... really soon.

When opening a RAW image in Adobe Camera Raw, I noticed something odd: if I apply AI Noise Reduction as the first adjustment, the process completes in just a few seconds. But if I apply it after making other corrections to the image, the AI Noise Reduction can take several minutes.Is this expected behavior, or could it indicate a lack of optimization in Camera Raw?Based on this behavior, I now run AI Noise Reduction as the very first step, and then apply all the other adjustments afterward.

  [Moved by moderator from the CC Desktop forum]  

When I load multiple images into Bridge (for example, 300 pictures of a sunset over the ocean), many of them are not level. The horizon is tilted because I did not hold the camera level. So, I go into the Crop settings in Adobe Camera Raw and double click on the "Auto Straighten" button and the image is perfectly straightened. When I select multiple images and then go into Adobe Camera Raw, they all appear along the bottom like a filmstrip. Then I can select all of them and, for example, click the Auto button on the Edit panel and even though I am doing multiple images at once, they all receive unique Light and Color settings specific to each image. Not so using the Crop / Auto Straighten button. Selecting multiple images in Adobe Camera Raw and then double clicking the Crop / Auto Straighten button computes the rotation angle for the displayed image only and then applies this to all of the selected images. Something no one would ever want to happen! Please help me to auto straigh

Recently I switched from a Windows laptop to a Microsoft Surface Pro 11, running windows. When exporting photo that were taken in (Nikon) raw format, the following message appears:embedAuxFilesIntoXMP: unexpected failure: dng_error_unsupported_rawI did not have this issue on my laptop, and neither does it show when using the web version. As I have installed Lightroom a few days ago, I would expect to run the most recent version. My camera is a Nikon Zf Anyone have suggestions?

i tried many times install - and  unistall -i cant delet  camera raw  and also this is not working on mypc  . others all function  working .please help me to slove this . this photoshop 2026  

Hallo,ich benötige bitte Hilfe:Betriebssystem Windows 11 -22H5 - am aktuellen StandGrafikkarte: NVIDIA Geforce RTX 3050 TI laptop GPU  mit 4 GB speicher --> aktueller Treiber Problem tritt auf in Photoshop - Camera raw (aktuelle Version) z. B.  KI - Himmel maskieren --> dann "Dunst enfternen" --> dann kommt die Fehlermeldung: Der Grafikprozessor ist auf einen nicht behebbaren Fehler gestoßen. Aufgrund eines Laufzeitfehlers wurde die GPU-Beschleunigung für den Rest der Sitzung deaktiviert.Siehe auch Bild im Anhang Bevor das passiert ist der Regler "dunst entfernen" schon sehr langsam und reagiert verzögert. Hello,I need help, please:Operating system: Windows 11 - 22H5 - up to dateGraphics card: NVIDIA GeForce RTX 3050 Ti laptop GPU with 4 GB of memory --> latest driverThe problem occurs in Photoshop - Camera Raw (latest version), e.g., AI - Masking the Sky --> then "Remove Haze"--> then the following error message appears: "The graphi

hi there,in camera raw i was used to find 3 options when i've had to use remove tool, now, without any upgrade or version change, the AI generate only one version... is it a bug, new feature or i've involuntary change some setting?  my environment:apple iMac 24" - 2023macOS Sequoia 15.3camera raw 17.5.1adobe photoshop 26.11.0

Hallo, ich benötige bitte Hilfe: Betriebssystem Windows 11 -22H5 - am aktuellen Stand Grafikkarte: NVIDIA Geforce RTX 3050 TI laptop GPU  mit 4 GB speicher --> aktueller Treiber   Problem tritt auf in Photoshop - Camera raw (aktuelle Version) z. B.  KI - Himmel maskieren --> dann "Dunst enfternen"  --> dann kommt die Fehlermeldung: Der Grafikprozessor ist auf einen nicht behebbaren Fehler gestoßen. Aufgrund eines Laufzeitfehlers wurde die GPU-Beschleunigung für den Rest der Sitzung deaktiviert. Siehe auch Bild im Anhang Bevor das passiert ist der Regler "dunst entfernen" schon sehr langsam und reagiert verzögert.   Hello, I need help, please: Operating system: Windows 11 - 22H5 - up to date Graphics card: NVIDIA GeForce RTX 3050 Ti laptop GPU with 4 GB of memory --> latest driver The problem occurs in Photoshop - Camera Raw (latest version), e.g., AI - Masking the Sky --> then "Remove Haze" --> then the following error message appear

Hallo liebe Community,bei der Bildbearbeitung in CameraRaw kommt es immer zu einem Systemabsturz, wenn ich Entrauschen verwende. Ab der Mitte des Entrauschungsprozesses laufen die Lüfter meiner Grafikkarte (AMD Radeon 6500 XT, 4 GB) plötzlich auf Hochtouren und das gesamte System, also nicht nur Photoshop, stürzt ab. Mit externen Entrauschnungsprogrammen, wie bspw. Topaz tritt dieser Fehler nicht auf. Betriebssystem Windows 11 Pro. Der oben beschriebene Fehler trat auch schon unter Windows 10 Pro auf. Kann jemand helfen?Gruß Willy

When using Bridge to copy AI Denoise settings to 100+ files, it starts using increasing amounts of RAM, up to 80-90 GB. It seems to stop rising beyond that amount, however then the denoise process slows down with GPU idling most of the time, waiting for the next file to process.I've been experiencing this issues on both ACR 17. x and 18.x so far, on several different PCs with RTX 2080 Super and RTX 5090 GPUs. 

From Lightroom when I go to edit a Raw file in Photoshop and then filter in Camera Raw, the Lightroom settings are visually copoed over but all of the values sliders in the Camera Raw filter ar all set to zero. I have only just started to try and use ACR and prefer it over using the Lightrrom version but this has got me stumped. I like to use Lightroom for browsing albums and I like to make initial edits but now want to use some of the luminoisty plug-ins that are photoshop to take my photography to the next level.  I have included both Lightroom and Camera Raw scvreen shots showing that the settings are passed over (i deliberatly dropped the exposure to make the difference obvious) but the slider values are not. Hope someone can help. Chris  

I have the latest version of Adobe DNG converter but it doesn't recognise the ORF files from my OMD OM5 camera. Any solutions?

我的電腦是Win 11作業系統、CPU i7 9700F、RAM64G、顯示卡GeForce GTX 1660 OC 6GD在Camera RAW(以下簡稱ACR)效能選項中，已將Cache指向非系統硬碟的SSD且開為50GB在近期更新ACR Ver 18後在風景遮色片裡需要ACR Ver 17的2-5倍時間才完成而且會經常產生GPU停用的問題，但又不是每次使用時都會發生

On the Mac side, when using the Adobe Photoshop Elements 2026 Editor and the installed Camera Raw 17.3.1 using Help>Install Camera Raw, if you open Camera Raw click on Browse Profiles, then click on any of the available profiles, both Camera Raw and the Photoshop Elements 2026 Editor immediately crash   On the Windows side Camera Raw freezes and has to be forced quit using the Windows Task Manager.        

Bonjour, Depuis la MAJ Windows 15H2 et la MAJ du pilote novembre 2025 de la carte graphique NVIDIA, l'utilisation de la fonction "Paysage " de Camera RAW (bien conçue et très utile) occasionne le "plantage du logiciel et je dois redémarer le PC. Quelle solution pour résoudre ce problème , s'il-vous plaît ? <removed for privacy>

Não esta funcionando o Camera RAW, nessa versão, já instalei ele separado no meu macbook, mas mesmo assim não reconhece nessa versão. 

GPU Accelator IssueEverything was working fine, then out of the blue, I am getting the error “Camera Raw requires GPU accelator to edit photos.” when I try to open Raw files. I am running macOS 12.7.6.  I tried Photoshop 2021 and Photoshop 2024. Apple support said because I can see images in other applications, it’s not a hardware issue but rather a Photoshop issue.Help!  I have a new Mac on order but I need to get a project out the door. Thanks!

my photoshop was Chinese interface, When I use ACR 18.0 , I open the raw pictrue. The first was Chinese,but the second or third always switches to English interface, I must close photoshop,and open photoshop again, open a new pictrue, ACR18.0 was chinese. but alway switches to English interface. Many Chinese users have encountered the same problem as meI don't know why? please help me ,thanksmy computer was windows 10 , Photoshop 2025

I recenlty found when trying to preview any preset by hovering over it with the mouse in Camera Raw it would slow down, be delayed by 5 seconds or sometimes freeze up. If anyone else has noticed this, I suggest unticking the option called "Preview AI Settings On Rollover".It can be found by clicking the three dots icon within the presets panel. After doing this it should be performing much better. It worked for me.

Bonjour, Dans Camera raw voici le message d'erreur que je reçois quand je veux charger l'arrière plan : "impossible de charger le modele de selection par IA" Quelqu'un peut il m'aider? Merci d'avance

OS: MACOS, W10Camera RAW smart filter (PS): 17.5.0.2318PS: 26.11.0 STEP TO REPRODUCE:I copy a camera raw smart filter with subject masks in it to a new file (to copy editings from a file to another),ACTUAL RESULT:when I try to create new mask for the new subject to apply the edits, it always recreate the old masks from the source fileEXPECTED RESULT:when I try to create new mask for the new subject to apply the edits, it generate a new mask based on the actual layer where the filter has been applied source file target file This is very annoying as it slows my workflow. Can you fix it as it was in the old PS version? TY.