Questions

Waarom kan ik camera RAM niet geactiveerd krijgen in een legale versie van Lighroom 6. ( cd versie)

PS ver 23.4.1Camera Raw ver 14.4.1.1122Windows 10 64 bitNvidia GPU Geforce 1070ti ver 512.96 I keep getting an unrecoverable error in PS with my NVidia GeForce 1070Ti GPU.  I have been using this GPU for years with Adobe products and rarely have any errors like this.  I recently upgraded to Nvidia's studio driver ver 512.96  And this is when the errors started.  But also PS and Camera Raw were updated.  I am planning to roll back to ver 472.47 which is the latest version before 512.  The errors seem to occur when working with Neural filters.  I saw a post that stated Neural filters only work with the Graphics Processor turned off.  I find that hard to believe.  The message says the GPU accelerator has been disabled but I am not finding that to be the case. Anyone else seeing this error? 

What used to take seconds to save photos in camera raw is taking hours today... I noticed I needed to make an update in camera raw, so I've been trying to and keep getting an error telling me to close Photoshop. It is closed. And yet, I still keep on getting this error! I've tried all sorts of things..: restarting my computer, checking in task manager etc. I don't know what is all of the sudden making it slow,  but this is a big problem for  me!  

Without an apparent reason a RAW file, after the end of my work, when Iclosed it apperead in Bridge as an .acr file. I tried all I can but it is impossible to oper for meI need help.

Latest update to Camera Raw Plugin Causing GPU Error, out of Memory Issue.           {Title edited by Moderator}

If you have a local gradient adjustment mask with multiple 'sub masks' underneath (like "Mask 1" and then under is Radial Gradient 1, Radial Gradient 2...etc — which all inherent/share the same adjustments) and then want to move then all-at-once, is this possible?Seems like i can only do one at a time. I have multiple versions of this one group shot and the only thing that changes bt them is the framing, so applying the mask to all then moving them all at once for subsequent versions would be really nice.

Hi. I have been using camera raw/photoshop for quite a while and feel silly asking this question, but here goes:I normally crop in photoshop, not camera raw. However, in camera raw (using latest version 14) there seems no way to crop to a specific height/width in inches/cm/pixels etc. For example, if I choose 1x1 in the drop down menu and then open in Photoshop and select image size, it is indeed in 1x1 but how are the dimensions in pixels or inches that are displayed determined?My second query is the "constrain to image" checkbox in acr. When I crop it doesn't seem to make a difference whether it's checked or not. How does this work please? Cheers.

I have a folder of hundreds of raw files.I like to convert & proces all of them using the auto WB & auto all settings (Exposure, Dontracts etc within Basic panel) in Camera Raw. I created an action whereby it will do the above. However I noticed the software will only take the auto settings of the first file (which I used to create the action) & apply that to all the otehr files, instead of analysing each fileand apply an auto settings specific to each.Is there any way to achieve this? Thanks.

When opening Olympus ORF files in Photoshop 2022 (via Adobe Camera RAW), the resutant image size is 5184 x 3456 pixels.If I open the same file via 'OM Wrokspace'  or 'ON1 Photo Raw', the image is 5184 x 3888 pixels. The thumbnail veiw on my MAC also shows the 'full size' image.Why is it opening at a reduced size in Photoshop?Thanks. Neil

Since a recent update of Photoshop and Camera Raw, when I select the Crop & Rotate functions of Camera Raw, it comes up with the "Constrain Aspect Ratio" control locked. That is, when I move a crop border, the other 3 crop borders move correspondingly to keep the same aspect ration. I want it to come up unlocked -- how can I change this behavior?

I am creating masks with the brush tool in ACR, and several times now, I have lost my mask edits. At first I thought I accidentally hit "Cancel" instead of "Done." *This is 100% not the case.*  I then considered the possibility that my mask edits simply weren't being saved correctly after clicking "Done." So, I decided to do some edits, save the file (clicking "Done"), reopen the file, make more edits, save the file again, rinse and repeat. I figured this would safeguard me from losing a whole bunch of edits in case of shoddy saving. This worked fine until it didn't. Several times now, I've opened files only to discover that some masks--masks that were saved properly at some point (confirmed)--have been lost. Oddly, the mask is not lost in its entirety, but what appears is a much earlier version of the mask, both in terms of the coverage and sliders. This is beyond maddening. Tech specs: I am editing RAW files from a Nikon Z7ii in ACR (Photo

Since this week's Photoshop update, I have noticed that any local adjustments I make in ACR (radial and graduated, for example) are not being saved with the .xmp file, ie: I am re-opening previously processed raw images and whilst all the colour, exposure and other adjustments remain as per my edit, all the local adjustments have disappeared. Anyone else noticed this?

When I try to apply any masks on my photos in camera raw, they come off very buggy. Brushes are pixelated and then finally load, only applying to certain parts of the image regardless of where i brushed. Radial and linear filter are very snappy. Radial doesn't allow free adjustment and snaps to certain sizes. Linear will either snap on the photo or snap outside the photo making it impossible to add any kind of masks to my photos.

I updated my Camera Raw today and notice that the crop tool is always set in the lock position. Since I'm always cropping in odd ratios, I have gotten used to having it unlocked as a default. I try setting it multiple times and after searching for what felt like an hour, I couldn't figure it out. Is there a way to set the default to unlock setting in the crop tool? 

Hello,i would like to ask if there is some way how to increase or decrease the actual exposure of multiple photos by some "offset" value...The Auto function is doing overall good job, but very ofted I would need to take existing exposure created by Auto function and add for example 0,2 points. 

I may be being slow but have tried searching the forum without success. Is there a way of applying a Photoshop Action to a batch of files in ACR and it processing them all together ?Many thanks in anticipation. Using CC on Windows 10.

Many years ago I bought Photoshop CS6 and Lightroom 6 as stand alone versions. I got a new computer and I am trying to move these programs to my new computer. They are installed and working but when I try to move a photo from LR to PS it says I need adobe camera raw 10.1. If I knew what the plugin file was called I could try to do a search on my old system to see if I still have it, or need to be able to download it again. I am wondering if there is a way to get the plugin and/or I could just copy the camera raw folders from my old system into the same spot on my new system. I found a download on filehorse.com, but I am leery of downloading an .exe from a 3rd party source. Thanks Windows 10Photoshop CS6Lightroom 6

When exporting image files from Lightroom Classic (11.2) with chromatic abbreation and profile corrections enabled (Sony FE A7R-III / Sony FE 16-35mm F2.8 GM) and merging those photos with Lighten blend mode in Photoshop (23.2.2) by stacking them as layers, two concentric bandings that cover across the entire image emerge. Disabling vignetting to 0 reducde the effect to some extent but doesn't remove it completely. Disabling both chromatic abbreation and lens corrections completely removes the effect entirely. I reported this issue on https://www.dpreview.com/forums/post/66239744 but there is another report of the same issue in 2017: https://www.dpreview.com/forums/thread/4160819

I am on a PC using Photoshop 23.3.2 and have recently discovered Camera Raw, which would appear to be the answer to my many needs. However, I can't find anything to help orient me. So I have a number of questions. Under my Adobe Creative Cloud Photoshop appears as does Lightroom and Lightroom Classic. They can be opened. Camera Raw appears  ( I think I recently had the option of updating it) but it does not have an "open" but. 1)Does that mean I need to open it as a Camera Raw filter while in Photoshop? 2) A number of other users have indicated opening Camera Raw through Bridge. What is that? Do I need it? 3) Once I am able to open Camera Raw and grab a raw file from Photoshop by opening as and then changing the format to Camera Raw once I make a change, is clicking "Done" the same as saving the file? And is the file to be saved in a particular format (I will want to make more changes). 4) Where are the Adobe Camera Raw tutorials? I don't see a Help button

Hello everyone. I'm a long time photoshop user who never learned how to use lightroom. When I started editing I learned from a friend who only used Camera Raw. In the following 10 years I've become rather sadly dependant on my workflow and the use of the brushes I've created in Camera Raw. Up until last month I only edited on my 2010 Mac Pro and thus my Adobe isn't the most up to date. Currently my desktop says it running Camera Raw 14.2  Fast forward to today. Im typing this from a new M1 Macbook which has the latest Camera Raw 14.3 I believe and the layout is slightly different. I've found out where I can make brushes but I can't seem to make one and save it in the program. Am I doing somthing wrong?  And my main question is this. Is there a way to transfer all of the brushes I've made on my older version to my new computer running the 14.3? Or can I get 14.2 on my new Mac Book?  Thank you all in advance for your time. Have a nice day. 

Ho appena eseguito l'ultimo aggiornamento di Camera Raw: aprendo Bridge, selezionando un file Cr2 e volendolo aprire in Camera Raw leggo il messaggio: "Modifica in Camera Raw non attivato.La modifica in Camera Raw richiede che un prodotto originale sia stato avviato almeno una volta per attivare questa funzione"Mi chiedo se è più di un anno che uso questo prodotto all'interno di Adobe Creative Cloud, che cosa devo avviare e dove?Grazie.

Hi Everyone.I have a problem / bug on my new Macbook Pro.Camera raw filter does not appear in filter tab in PS (only for second User). It is listed in CC apps.Everything is updated in CC. I tried to reinstall PS and install Camera raw manually - nothing worked.Any ideas? Thanks.Peter

I have accidentally opened an RAF file in Camera Raw whilst working on a photoshop file. Everything on the Camera Raw window is greyed out, including the buttons and I can't escape using the keys. I can't get back to my photoshop file to save it so can't quit. If I move the Camera Raw window i can see a ghosted "Welcome to Camera Raw 14.3, learn more, get started," picture of a turtle, etc.   Can anyone help?   Thanks     {Title edited by Moderator}    

I 've changed my laptop for à macbbok M1 and since then When I open my camera raw the dialogue page is all black? I can't see anything except "open the image" "cancel" button...

Hello, I hope someone can help. I am currently running Elements 2021 which is the most up to date verson of 2021. I have then downloaded Camera RAW 13.1 as currently I have 13.0 and this cannot read my files from a Nikon Z6ii. I can download it and install it and it tells me I have installed it succesfully, yet when I reload Elements 2021 the Camera RAW version is still the previous version 13.0I am running a MacBook Pro 15inch 2017. (Version 12.4)If anyone can assist me I would be forever grateful. I only updated to Elements 2021 (from 2017) so I could view my images on my Z6ii but as I haven't been successful in updating Camera RAW since I purchased it and therefore feel it's been a waste of money to upgrade. And now this is my last hope.