Questions

I am on captivate 11.5.5.676.  I am continually using slide notes.  Sometimes when I use the slide notes, I will change the slide note then when I go back into the slide, instead of what I have written, it will say Enter Slide Note and does not change.   Sometimes it takes 3 or 4 times and it will change back to Enter Slide note right before my eyes,   This is getting really frustrating.   Why are they reverting back to Enter Slide Note?   It is randomly doing this.   Sometimes only a few slides in a presentation sometimes it does it over and over again.  I cannot see what I am doing wrong.

My team and I are switching from a non-responsive template to a responsive template, and I have a couple questions in regards to a Responsive project's maximum width of 1280px and the three default breakpoints.I notice that the maximum width of a responsive template within Captivate is 1280px.  If a user is on a computer desktop monitor that has a greater width of 1280px, would the user be able to expand a published responsive project all the way to match the monitor's full dimensions keeping all content in tact and not cut off?Also, if a browser holding a course in primary view was shrunk to a screen size smaller than the maximum tablet view break point width, would the course still be responsive within the rescaled browser window? Thanks much.-A Captivate Enthusiast

Hello. I'm using Captivate 2019 and having some issues with the accessibility of hyperlinks. In the Tab Order panel I have arranged all my hyperlinks in the correct order. However when I use my keyboard to navigate the published page, only the buttons work. The tabbing function does not navigate to my hyperlinks. Any help would be appreciated with this issue. Thank you. 

Hello. I'm creating a project using Captivate 2019. Currently when tabbed through with keyboard-only, there is no visible focus around the buttons. This visible focus is important so keyboard users can easily determine which element has focus in order to interact with it correctly. Is there a way to make visible focus or a highlight appear around elements that are selected when tabbing through a project built with Captivate 2019?  thank you! 

Hi,I created a project in Captivate 2019. In one of my slide, I created a button with the action to open another Captivate project, which is a software simulation I created which will serve as a Demo. In the "on success" field, I chose Open another project and selected the "Demo" I created and published. When I review my published final project and I click on my button to launch the demo, I get an error message. What am I doing wrong, I need your help! Thanks 🙂 

I am currently using the trial version of Captivate 2019. I'm making an interactive video, but I've changed the icon color in the assetfrom gray to white and in the layout preview it's changed to white. However, when I publish, the icon is grayed out. It may be very easy, but thank you. 

I am using captivate 2019. When I paste Hindi text in the dropdown under the fill in black, it does not come right as shown in the screenshot below. Please solve this problem. 

I am using Adobe Capticate 2019 11.5.553 to create a learning module. The module is published as an HTML5 file. As settings I use the SCORM 2004 3rd edition.In Firefox the learning state goes to edited after I have closed the module. Nothing happens in Edge. What could be the reason for this?We have ILIAS as our LMS system.

Hello,I am having multiple issues with 508 compliance with Captivate 2019. For some reason any text (regardless of if it has alt text or not) can't be read by a JAWS screen reader. The only time I can get anything text based to show up and be read via a screen reader is if I make it a transparent button which if you do that will always end not matter what with "click enter" so that is not a viable solution. I am not sure if this is an oversight because I wasn't having any of these issues with 2017 captivate. In fact, I have a fully 508 compliant course in 2017 and when I converted it to a 2019 file none of the former text was working. This is leading me to believe that captivate 2019 is not 508 compliant. Has anyone experinced this issue and/or have a solution? I have checked https://helpx.adobe.com/captivate/using/creating-accessible-projects.html which has not been updated since october of 2018.

I have a SCROM package created in  Adobe Captivate 2019 (11.2.2.53) . File  size 193MB.  Page is not loading, when i importaed file to Moddle on hosted server envirnmer .. However it workes perfectly in Moodle cloud .. Any thoughts .. 

When can Mac users expect a release of Captivate compatible with the latest Mac OS? I think I'm paying the same kind of money as Windows users for my subscription.

Hello,I am trying to find out if it is possible to extract the source files from a Captivate project that has been published to a Scorm package for an LMS. The source files have been misplaced by an employee who no longer is employed with us, and we need to change some objects from flash to HTML. Thanks for your time.Matthew Lau

I got an issue with state views on Android and IOS. It works ok on a IOS and Windows computer.I made my own "question slides" where I got four check boxes withad smart shapes (id=button+something).Each check box got two states "button" and "pressed". When you click on a check box it should change state and show a checkmark.png inside the object using the JS below (it should also show another object using cp.show('Object name');But the buttons simply not changing states.Here is what I got from the remote debugger in Android.///// This JS code is inserted on every slide (on enter)switch (true) {case (Device == "Touch"):window.addEventListener("click", function(e) {if(e.target.id.startsWith("button")){cp.changeState(last, "Normal")last = e.target.idcp.changeState(last,"pressed")}}); break;case (Device !== "Touch"):window.addEventListener("mousedown", function(e) {if(e.target.id.startsWith("button")){cp.changeState(last, "Normal")last = e.target.idcp.changeState(last,"pressed")}}); break;}

Hi, I made an advanced action to make a custom fill in the blank quiz during the slide using Text Entry Boxes (TEB). I have an advanced action that scores each TEBs and yields a variable (score_total) for total score, by adding each scores earned for all TEBs, and it is a user variable. Is there anyway I can report this variable (score_total) to LMS? Also, I know it is not possible to manipulate system quiz variables, since they're read only, but I was wondering if there is alternative that I can override system variables. FYI, I made this advanced action, rather than validating user input, because it creates multiple submit buttons corresponds to muliple TEBs. Also, if I were not to use sumbit buttons by using auto submit function, I have to set maximum letters and in that case, user can't type in any words exceeding max letters.

Hello,I would like to ask if what is the possibility to make Adobe Captivate presentation to resizeble that on moodle platform an user can adjust the size of the presentation to his own computer monitor?Is the changing presentation to resposive project the only possible way?Thank you for answer. Regards

How can Adobe Captivate 9 language set to read Arabic language

hola quiero pagar mes a mes, existe alguna penalidad si dejo de hacerlo luego de 7 meses y que pasara con los cursos creados en esos 6 meses

I need to provide SME's with a storyboard template that will be used for developing in Captivate.  Does anyone have a good one for use.  By "good" I mean one that will make my life easier as a new user of Captivate.

Hello, I am new to Captivate.  I have taken the basic course on Linkend Learning but I need some one-on-one training assistance. The 2-day workshops offered by training companies still left me with many questions.  This is a critical need, as I have recently taken on a job that requires me to know Captivate.  I thought I knew enough, but I need help.  I will definately make myself available to others in need once I learn the tool. 

HiI am using Vimeo as a slide video. Is their a way to ad a full screen button for the video?BrRobert

I used the Millionaire Widget for Project Management Training that I do twice a year.  When I went to run it recently, it didn't work because it was a SWF file.  When I open the file in Captivate and Preview in HTML5, it looks great.  When I publish it to HTML5, the screen just says "loading" and doesn't run.  How can I get what I am previewing to be the published version?

I get this message when I try to publish the course and also somethimes when I try to open the file. The file gets corrupt and everything I have worked with is lost. Any ideas?

Hi,Can someone recommend me any text to speech website or software that uses human like voices? Best one I have found thus far is Lovo. I wouldn't want to put all my eggs in one basket so any suggestion would help tremendously. Thanks!

Hi all 🙂 I have a slide in a simulation that recorded me scrolling down the screen and it recorded as such on the timeline:   Is there any way in Captivate to make it so when the user goes through the simulation it doesn't scroll as quickly? It's about 4 seconds now but I'd like to increase it to about 7. I think I could probably create a video of the scroll and then import it into the project, but is there a way to do this inside of Captivate? Thanks in advance 🙂                 

Hi, I am trying to have a video as a background on a slide in my project. When I import the video, I adjust the size of it to the slide (1280 by 540). I removed the skin and set the video to auto rewind and loop. I added to text boxes to slide that sit on top of the video. When I preview the slide in Captivate, it works perfectly. However, when I publish the file and upload to my LMS (SABA TalentSpace), the video is not the same size.  What am I doing wrong? Is there a setting I am overlooking? Could it be the LMS?  The video is an mp4. Does the video need to be another format?