Questions

Hi all,   I'm a rookie FrameMaker user and I adopted my former colleague's Ditamaps, XML's, etc. Now when I open a few of the Ditamaps, this happens (see image).   Am I in trouble?   Thank you in advance!

Hi,I am currently trying to modify a TOC for a book I'm working on. I have tried all the methods that are in the help locations, as well as the relevant messages in the community pages. Nothing is working. I am attaching a screen showing the issue with all the page numbers appearing in roman numerals.Can someone please help me with this? Thank you.Elizabeth  

You all do know good old Equation Editor. However, these equations end up as graphics in published output (e.g. HTML5). So I tried to use the new thingy Insert > MathML Equation (FM-15, 16, 17) But I get the error message "Java run time environment (JRE) not found". There is C:\Program Files (x86)\Java\jre1.8.0_231 on my system. → Why does FM not find it?

Hi,I thought I had sent this post a little while ago but I don't see it, so I'm re-adding it.I have a book file that has 4 empty pages in one file. I have tried various ways to delete them, as per the help information that is available. They have not been deleted. What is also strange is that 3 of these pages has a footer with the chapter name and page number, and 1 page does not. And of course the start of the next chapter has an incorrect page number because the book counted the blank pages.What am I missing? Any help would be great!Thank you.Cheers,Elizabeth 

Our EDD is structured with a top level Chapter element that consists of a CoverPage element, followed by a Section element. The CoverPage element is used on the first page of the chapter, with a specific Master Page layout. The Section element starts on a new page and use the default Left and Right Master Pages. The text frames on the CoverPage, Left and Right pages all use Flow A with Autoconnect. The text frames on the Left and Right pages have a Side Head. The Coverpage does not. I\On the Master Pages, these are setup - no issues. On the Body Pages, all pages using the Left and Right Master Pages have the Side Head setting applied (correct). However, the text frames on the first page (using the CoverPage Master Page) are also applying the Side Head, even though it's not applied on the Master Page. When the text frame properties on the first page is overwritten to remove the Side Head, it is removed from all the pages, even those using the Left and Right

I have a 220-page chapter that starts with two pages in portrait orientation followed by 17 disconnected pages in landscape orientation that I carefully added by following a tutorial, which included applying a landscape master page.  I just noticed that I can't edit anything on the disconnected pages (tables) or the 200 portrait pages that follow. I can edit the text on pages 1 and 2.

Using FM2020, structured with DITA.When a <menucascade> element is inserted, it appears on its own separate line in the authoring view, whereas a simple <uicontrol> element appears inline: I would prefer it if the <menucascde> appeared inline, in a similar manner to the <uicontrol> Note: when the PDF is generated, the menucascude correctly appears inline (i.e. this issue is restricted to the editing/authoring within Framemaker). 

When I click in the WYSIWYG view in a cell the focus automattically jumps to the end of the cell below the automatic inserted child. That means I always have to click in the tree behind the element in which I want to write or to use the arrow-keys. See the video below. Is there any way to change this behaviour?

Hello to the community,it seems, that FM - even FM2022 - does not correctly or even not at all overprint.I use warnings in which black text runs over colored backrounds. I've tried everything, but couldn't manage, that the text is not knocked out. What me also wonders: When creating a new, blank document, the standard black color is set to knockout ("Aussparen" in the German version). This is fundamentally wrong - you would never set black to knockout. This color is mainly used for text - and you would never want text to be knocked out (except in some rare cases where you want a maximum deep black).I created new colors (e.g. black overprint) set it to cmyk 0 0 0 100 or 0 0 0 99 and to overprint: but no success. I also set the text above boxes in the three cmy colors 100 0 0 0, 0 100 0 0 and 0 0 100 0: but always the same result: the text is knocked out.I also tried many different PDF settings, without and with using Distiller within the "Save as PDF" process and also "Printing to PDF"

Hi, When I try to take pdf (File> Save as Review PDF> Send Through Email) of any FM file, I get the below error in Adobe FM and Adobe Acrobat applications, and PDF not generates.Also, in the log file that generates at the time of pdf conversion, I get the below error. So, I tried the below steps to fix the issue, but I couldn't:Uninstall FM and reinstall it.Uninstall Adobe acrobat and reinstall it.Delete All open sans fonts (As I get the error for Open Sans font in the log file) and reinstall them again.Can someone guide me on my mistakes, as I could not figure them out? 

Does anyone know of some good tutorials for InDesign that are geared to FrameMaker users? Links would be sincerely appreciated!

My current TOC shows three levels; I only want to show levels 1 and 2. Is there a way to change it (reference page?) without having to reformat a new TOC? Thanks!  

Does anyone have any idea when FrameMaker will support ARM processors?

We have a number of separate training manuals (FM books) that we want to consolidate into a single manual (FM Book). To identify where each manual starts, we want to add some sort of "Section Heading". I tried using Groups, but can't seem to include the Group Title in the generated Table of Content. I tried using Folders, but then the <$chapnum> system variable (used for the chapter numbers each manual) isn't updating (Chapter is disabled in the Numbering Properties). I did notice that Section is enabled in the Numbering Properties when I have Folders, but the Chapter number is still disabled. I tried the FM Help file, but, like most Help files, it doesn't tell you really anything useful. Short of adding a 'dummy' FM file before the first chapter in each manual with the "Section Heading", is there another, better way to achieve this? This is what I'm trying achive:FM Book:Generated TOC: 

I have the building block to to increment in each "chapter". But I need to move the chapters around. My first chapter block is S:<n=1>.<0>< =0>\t, and the next is S:<n=2>.<0>< =0>\t and so on.I am using 1 Heading style instead of a chapter style. Any way to automate it so I do not have to change the "n=?" numbering manually for each file? 

Hi All. Using FrameMaker 16.0.4 on Windows 10. I'm currently having an issue with cross references when I generate HTML5 topics. As an example, I have an FM file with multiple H1s and H2s, along with cross references between those headings. When I generate HTML5, H1s and H2s get split into separate HTML topics (as defined in the Publish settings). On themost part this works without any issues, however if I have a H1 or H2 that uses one or commas in the title, the cross reference pojnts the "wrong" filename and shows as a broken link in the HTML. For example, a H2 with the title "Components, Capacity, and Resiliency" generates the file "Components__44__Capacity__44__and_Resiliency.htm" - the TOC uses the correct file reference, but cross references use "Components,_Capacity,_and_Resiliency.htm". Any ideas on how I can resolve this?

I have some UI suggestions on the Adobe Tracker. Recently I got these messages:   Issue - https://tracker.adobe.com/#/view/FRMAKER-12708 Version updated to 'FM2022' Version updated from 'FM20222' to an empty value   Issue - https://tracker.adobe.com/#/view/FRMAKER-12617 Version updated to 'FM2022' Version updated from 'FM20222' to an empty value   But what do they mean? I would expect @Winfried Reng to have recieved one as well, as he has commented on one of the suggestions...What is an "empty value" in this respect?

Hi, I am in the midst of trying to format the TOC for a book. I am able to get a L1 HeadTOC entries to look the way I want, but the Chapter TitleTOC and remaining chapter names and L1Head- Same PageTOC aren't changing. What am I missing?I am including screenshots of the Reference page and the TOC. Thank you.Cheers,Elizabeth 

I have a client who has an enormous amount of documentation in FM2022. Recently we have started getting this error message when we try to print a book. When we do a "Save as PDF" and have Distiller on, things seem to work better, but not always. When we print to Adobe PDF FM invariably quits the process with this message. I have tried supplying every thinkable version of Courier - makes no change. I have tried making a folder with Courier fonts and haves set them to always embed in Distiller - makes no change. I have tried different variations in PDF settings with rely on systems fonts or not - makes no change. I have looked into the maker.ini - and I suspect this is where the culprit is, but I can't figure out what to change. It looks ok regarding the renaming of Courier. But then again - I may be wrong. Does anybody here have a suggestion as to where to look?.. -Bjørn

I have a TOC that has leader lines before and after the section title at level 1 (3 sections only) and at level 2 (one section only). I have checked the TOC in the Reference page and the numbering format for each section in the book. I found no extra spaces in the Reference page section definitions or the section titles in the body of the manual. The selected styles are the same for the good and bad heading in the TOC. I also looked for a possible random charater style in the title lines but nothing there either. Ideas?  

Is anyone having publishing to PDF. When I try publishing to PDF I get a very small print in the center of the page. Has anyone else seen this and found a fix.

Hi. A lot of my FrameMaker work includes Gujarati text. Exporting them to PDF worked fine up to FM 2017. But in the new FM, the Gujarati comes out haywire. Help?

My company has requested a new template of table to use where the outside edges of the table is a thin black line, and the rows are separated by a thin black line. However, the rulings for the rows should stop short of intersecting with the outside edges of the table. Is there a way to implement this in Framemaker without a cumbersome workaround?

Hello,I've been looking for the "Adobe FrameMaker DITA Applications for Documentum" to download, but I couldn't find where I can get it.Is it still avaliable somewhere?Thanks for any information. 

I'm working on a book.  When I open it and run a bookwide script I get an error on one chapter (Atch 5) because there is no insertion point in the chapter.  Additionally, Atch 5 current pg no. shows -1.  If I click on the attachment, an insertion point appears and the page number updates to pg 1.  I've saved it and open it again, everything is fine.  If I close all the files of the book and reopen the book, the problem reoccurs.  I searched the forum and read article "Chapter Numbering Broken - 1 Book File Only," but nothing it suggested seems to work.  When I open numbering properties, the Pg# is set to 1 and in Paragraph Designer, number format is "A:ATTACHMENT <$chapnum>" like all the other attachemens.  What am I missing?