Questions

Hi,I imported a Word document with lots of tables into unstructured FrameMaker 2020, and the tables are not aligning properly. The are positioned outside the page parameters. The tables have landed near the middle of the pages and the right sides are not where they should be. I don't know how to fix this. I would appreciate any advice/help for this issue. Thank you.      

I've been working to get FrameMaker (Win11) and RoboHelp (MacOS version) to run on an ARM-based processor. (FrameMaker works, except for PDF workflows, with some system hacks covered elsewhere in this forum. RoboHelp for MacOS churns at the initialization screen).   Adobe has communicated on this forum that these products are not supported on ARM-based processors. But I've been a bit mystified trying interpret this from the product system requirements. For FrameMaker, Adobe says (https://helpx.adobe.com/framemaker/help/fm_system_requirements.html😞 Core i5 or faster processor RoboHelp says (https://helpx.adobe.com/robohelp/using/rh_system_requirements.html😞 Intel Core i5 or faster processor (recommended)   I think there's a discrepancy between what Adobe means and what they say (certainly ARM processors are faster than Intel Core i5s). Should Adobe consider specifying the Intel requirement as "Intel processor, Core i5 or faster recommended"?   -Alan Ho

I am working with DITA template design right now and I am constantly annoyed by the design of the PDF Publish dialogue for DITA. So here is my suggestion https://tracker.adobe.com/#/view/FRMAKER-12699 Make the Publish dialogue window scalable so you don't have to scroll in order to see all templates Make the dialogue showing the template file name large enough that it does not truncate the name. Substitute the "name box" with a proper window showing the entire url so it is transparant which file is being used for which template. Please vote if you like 🙂

In the FrameMaker User Guide, System requirements topic, there is a note that says:Maximum supported screen resolution: 4K (3480 × 2160).The 3480 is a typo, because 4K is twice 1920 × 1080, which is 3840 × 2160).This is FrameMaker (2022 release), Version 17.0.0.226. It shows September 29, 2022.

Hi All, Update 1 for FrameMaker September 2022 release (Version 17.0.1.305) is available since last week. It has many improvements like removing system-generated prefixes from named destinations, better handling of SVGs, improved handling of conditional tags in faster PDF publishing route, and security issues. For more information, see What's new in Update 1 of FrameMaker (September 2022 release). For a complete list of Fixed Issues visit https://helpx.adobe.com/framemaker/kb/fixed-issues.html You can get the update in FrameMaker 2022 from Help -> Updates section. Thanks FrameMaker Team

I'm finding moving tables (cutting and pasting them) to be difficult.  The only way I can seem to select the table for cutting is to find the text symbol of its placement in the document, then click and drag over the symbol until the table is shown as highlighted.  I then cut and paste it elsewhere.  The problem is I usually end up cutting and pasting one or more characters adjacent to the table symbol, like newlines.  I then have to re-add the accidentally cut characters at the cut location and delete the extra characters at the paste location.  Is there a better way to move JUST the table?I am using "float" for the placement of the tables.  Another problem with this is trying to find the place where the table is inserted in the text.  If I have several tables on the same page, I have to highlight the various insert position text symbols in the text until the desired table is highlighted.  Why can't I just use the mouse to drag over the table to

We've been doing several books with multiple documents in each book; up until now, TOC creation has been pretty easy; select the book, create standalone TOC, select which paragraph tags to include, and then apply or import formats, edit reference pages, etc. For whatever reason, the book we just finished pulls in all of the para tags we designate EXCEPT Level1Tag2, and it ONLY fails to do this when we try to make a TOC for the entire book. If we make separate standalone TOCs for each document in the book, each document TOC brings in the Level1Tag2 and includes it. It's only when we try to do the whole book that it fails. Every other tag we select gets pulled without problem. Any ideas what might be causing this and how to fix it? Thanks in advance.

Hi,A previous writer created a Product Name variable, and three books share a cover page. When I edit the Product Name variable and change the name, it applies that name to the cover page throughout all the books. Is there a way to use the Product Name variable and make each book's cover page different? Is there something I am doing wrong?? Thank you for any help. Cheers,Elizabeth  

We just updated our Adobe Pro 2017 to Adobe Pro DC and some of the internally created job options we have installed  using Microtype Timesavers do not work.  This happens when using the Distiller.  Is Microtype Timesavers a thing anymore?  My Google search came up with only out of date websites for them.  Someone in our department created a special job option with the Timesavers (plugin) so that certain pdfs would automatically put a bookmark link to an external website and set up the other bookmarks to two levels.  Naturally, this person is long gone. What say you fellow FrameMaker users? 

We're running into another bug with the HTML5 conversion in Frame. This time, if a URL ends in .pdf, it is converted so that the HTML points to <a href="../assets/"> instead of the URL. However, if the hypertext marker and text are in a TABLE, the URL is converted correctly. I can't think of any logical reason for this behavior and can find no relevant settings of any kind that might affect the URLs in this manner. Has anyone else had this issue? Or can confirm that this issue happens for them? We've run testing on 15 different machines, people, browsers, etc. and it happens all the time.  We've opened a bug report here: https://tracker.adobe.com/#/view/FRMAKER-12619. 

HelloI installed FrameMaker 8.0 on Windows 11. Installed also Frame_Patcher_8_p266, Frame_Patcher_8_p273, Frame_Patcher_8_p277. If I started FrameMaker in Admin mode, the question for "Frame Maker" / "Structured Frame Maker" appears. Pressed "Frame Maker", but then nothing happen. I can see in the Task Manager that FrameMaker is running as a process.Read some posts in this community that FrameMaker is not working with Windows 11. Further then read that newer Version of FrameMaker do work with Windows 11. Interesting is, that a coworker on Windows 11 confirmed he can work with FrameMaker 8.0 on his Windows 11, but he installed FrameMaker 8.0 on Windows 10 and upgraded Windows 10 to Windows 11.Tried already the follwing  hints:- Deleting C:\Users\[USERNAME]\AppData\Roaming\Adobe\FrameMaker\8.0- Run all installations in Admin Mode- Used AdobeCreativeCloudCleanerToolSo far, none of these helped to get FM workingAny hint suggestions to get my FrameMaker 8.

 How can I generate an IOM list of Acronyms with classification markings in front of them? See below example:When generated it looks like this because it’s generated alphabetically reading the classification markings.                  (C) TTW    Time to Work                  (S)  DC     Darn Challenges                  (U) ABC   A Boy CriedHowever, I want the classification markings ignored and only the acronym alphabetized as shown below?                  (U) ABC   A Boy Cried                  (S) 

I design and develop templates for FrameMaker. These are standard designs which are premade and usable for whatever purpose you have in mind. I could need some input, however, as to what you would look for if you were to purchase a premade design. Would you look for design aspects like page size, colors and typography or would you look for content/function aspects like User Guide, Instructions, Study book? Or would you look for a content standards like medical/medico/airplane/etc.?   And what would you need to make certain that you are on the right track? A sample User Guide in the design or samples showing all the paragraph designs and building block functions?   Please take a look at these pdf's where I try to communicate the design of a template. Would that be sufficient to communicate the intentions of that specific design? .... https://framemaker.dk/en/blog/quiote-2 https://framemaker.dk/en/quiote-adobe-framemaker-template-for-technical-documentation Best regards Bjørn

I have some very old (1994) Framemaker files. The first line is <MakerFile 4.0K>so I presume they are FrameMaker 4 files. They contain text, tables, and diagrams, iirc.Does anyone know how I can read them or translate to, say, pdf??

I have a script to open a series of documents with tables in each.  It's been working fine until I disabled some of the FrameMaker fonts I never use (Asian fonts per an earlier post).  Now one of my documents won't open from the script.  When I try to open it, the console pops open saying the "MinionPro-Regular" Font is not available.  "Times New Roman" will be used in this session.  I've used the paragraph designer and character designer to  apply the "Times New Roman font to my entire document, but still doesn't work.  Any suggestions?

Der friends,The white document hits again... ( see https://forums.adobe.com/thread/2276988) and I tracked it down to failing app.Displaying. The script requests function SetDisplay (bWanted) 17 times successful, but the 18. call does not switch the display any more. The routine is that simple:function SetDisplay (bWanted) { //=== Set display to on or off ====================================// Arguments bWanted: true => set display ON; false => display OFF// Commment  This function does not work reliably. See https://forums.adobe.com/thread/2276988// Reference Rick Quattro    Console ("    current:" + app.Displaying + " => wanted: " + bWanted);  if (app.Displaying != bWanted) {    app.Displaying = bWanted;    Console ("    set ? " + app.Displaying);  }} //--- end SetDisplayJust after the following log the document gets white:....SetDisplay(true)    current:0 => wanted: tr

Hi All,Does Framemaker allow 'find and change' of paragraph tags at a book level? For example, can I replace 'Heading1' with a different paragraph tag like 'Heading 1 with indent', throughout the book? The Find/Change menu,  in the drop-down menu under 'Find' section, allows selection of Paragraph Tag along with a text line where one can specify the Tag. However in the 'Change' section of the Find/Change menu, one cannot find a similar drop-down selection for the new Paragraph Tag.So how are paragraph tags changed throughout the book? Thanks in advance for your help.RegardsApurva

After solving the issue reported by https://community.adobe.com/t5/framemaker-discussions/we-can-t-verify-your-subscription-status/td-p/13476822 I decided to de-install Acrobat DC Reader, because I stated that I anyway most time need to use Acrobat 2017 Standard, which I also have installed. However, since the removal of the cloud App Acrobat DC it was not possible to open Acrobat by double click on the PDF file. All links found to cure this problem propose the following : Choose any PDF file. Right click on it and choose properties Under properties on General tab you will see open with and on the right there is a Change button. Clicking on the change button you will now have the capability to choose on which application will you use to open the PDF files. Choose Adobe Acrobat xxx on the list, then click OK. Once back on the properties menu just click apply, then OK. However, after that procedure (even if selecting the application from the file location where it is installed) I

Hi,I have a request to send FM source files to a customer. When they receive the files they will get them translated.What is the best and easiest way to get the unstructured source files to the customer? Thank you for any help. Cheers,Elizabeth  

Greeting to the FM community users, Does Framemaker 16 have a feature to automatically resize images on a page to avoid blank spaces?I am currently working on a FM document that has a large number of images, to be delivered as a PDF.I would like to use the largest size of images that fit on the default left/right portrait layout page. However, the document also has text and tables, which often creates the blanks spaces as seen in the attached screenshot.Trying to manually adjust the size of the image is taking a lot of time and slowing down the authoring process. I can already foresee that any additional text or images will need readjustment of image size to fill the white spaces.Is there a feature that I could use to guide me about automatically fitting the image in the page as per the available white space? Thanks in advance for your help and suggestion,Regards,Apurva   

I am fairly new to framemaker 15, was using version 7 for years. How do you change the way the fonts are displayed? On 7.1 I could view all of the fonts on 1 page. If I go to format - font it only shows in in 1 row in alphabetical order so if I need a font starting with T I need to scroll down or type the letter. Is there a way to view it all on 1 page?

    Since the end of 2022 i get the following message when starting FM 16 or 17: We can't verify your subscription status. We can't reach the Adobe servers. This may be because you're not connected to the internet. Check your connection and try again below. If you're still having issues, please see our connectivity troubleshooting guide. Of course I’m connected and i could download and install 17.0.1.305 with no problems. This is on  win 10, fully patched. I have not fiddled around with my Adobe account (otherwise I could not write this) - so what may be the cause of this? Since i have a perpetual license for FM-15 - which is ma work horse - I’m only unable to be a beta tester…

Does anyone know the functinality of mifhtml.dll - is it essential?Any idea how to fix?FrameMaker Version: 17.0.0.226 is used as editor for Quanos ST4. Thanks in advance, any help highly appreciated

I was using framemaker 7.1 and now have version 15. Have TONS of files that need to be updated. Is there any way to do it in bulk instead of opening each file and saving each one?

  Screen clipping taken: 1/9/2023 10:02 AM Clicking continue in the upper box  Screen clipping taken: 1/9/2023 10:02 AMClicking Continue again I get the document.Now I change the document and try to save it I get this dialog again.Screen clipping taken: 1/9/2023 10:05 AM     Screen clipping taken: 1/9/2023 10:05 AMWhen I click the Continue button again I get the save document dialog similar to explorer with the name of the document to save.  Screen clipping taken: 1/9/2023 10:08 AM Clicking on Save  Screen clipping taken: 1/9/2023 10:09 AM Clicking On OK  Screen clipping taken: 1/9/2023 10:09 AM I get the same cant lock dialogue. This the becomes and endless loop of dialog boxes. I cant save changes. What I am doing is using FrameMaker in FileFlex Drive Q for home access and security.  Basically  it’s some type of virtual network .  The result of their product is that