Questions

Lightroom Classic fails to correctly identify and assign the proper Tokina lens profile when the Tokina AT-X 24–70mm F2.8 PRO FX (F-mount) is used on a Nikon Z 7 II (via FTZ adapter).Instead of resolving to the Tokina lens profile, Lightroom shows only “Integrated” under Lens Corrections.The same lens is correctly identified and mapped to the Tokina profile when used on a Nikon D750.Environment:Camera (problem case): Nikon Z 7 II Firmware: 1.62 Camera (working comparison): Nikon D750 Lens: Tokina AT-X 24–70mm F2.8 PRO FX (F-mount) Adapter: Nikon FTZ Software: Adobe Lightroom Classic (latest version)Observed Metadata Differences (ExifTool):Working file (D750):Lens Data Version: 0204 Lens ID Number: 0 Lightroom correctly assigns Tokina profileNon-working file (Z 7 II):Lens Data Version: 0801 Lens ID Number: 0 Lightroom shows only “Integrated”Manual profile corrections do not auto-resolve to TokinaExifTool correctly resolves the Composite LensID in both files:“Tokina AT-X 24-70 F2.8 PRO

Depuis la mise a jour d’aujourd’hui, les notes et couleurs ne s'affichent plus dans la barre au dessus du film fixe en mode développement, elles s’affichent uniquement en mode bibliothèque. C’est gênant pour moi car j’ai l’habitude de les noter juste avant l’export et ça m’oblige maintenant a basculer entre les modes à chaque fois. Si quelqu’un sait comment rétablir ça je suis preneur (j’ai cherché mais pas trouvé :-( edit : Résolu, j’avais appuyé sur T sans m’en rendre compte Post modified by moderator to indicate that OP had resolved the issue. 

Pessoal, boa noite, alguém sabe como resolver isso? sempre que tento colocar em PB, ou qualquer outra ação, vem essa msg, ja atualizei, nao resolveu, desinstalei e instalei de novo.... e não adiantou nada

Estou tendo problemas há mais ou menos 2 meses com o lightroom.Toda vez que crio um catalogo novo e importo arquivos para começar a editar, as Visualizações Iniciais travam e o programa não faz mais nada.Sempre preciso reiniciar ele para voltar ao normal.Já desinstalei e instalei novamente, porém o problema persiste. 

i cannot remove a photo (or group of photos) from a collection. when i right click onthe selected photos, my only choice is to remove photos, and i click remove, it says that i can't  delete phots from within a collection. I'm not trying to delete them (from LRC or my disk) i just don't want them in the collection. There is no option to to "remove from collection"

I need some help.When I upload photos to lrc and I'm in develop mode,when I move on to the next photo,it displays normally,but after two seconds it becomes darker than the original shot.What could be causing this?Or what am I doing wrong?Lightroom Classic version: 15.1.1 [ 202601141538-a543b18a ]License: Creative CloudLanguage setting: enOperating system: Windows 11 - Home Premium EditionVersion: 11.0.26200Application architecture: x64System architecture: x64Logical processor count: 16Processor speed: 2,9GHzSqLite Version: 3.36.0Adobe GSDK Version: 1.4.0.171CPU Utilisation: 2,0%Power Source: Plugged InBuilt-in memory: 16087,4 MBDedicated GPU memory used by Lightroom: 622,8MB / 5920,0MB (10%)Real memory available to Lightroom: 16087,4 MBReal memory used by Lightroom: 1193,5 MB (7,4%)Virtual memory used by Lightroom: 3795,4 MBGDI objects count: 839USER objects count: 3219Process handles count: 2737Memory cache size: 568,7MBInternal Camera Raw version: 18.1 [ 2420 ]Maximum thread count us

Buongiorno, ho un problema con l’aggiornamento di LrC alla versione 15.1.1Il sistema mi dice di non poter installare l’aggiornamento i quanto il mio processore (I7 gen.3) non supporta le istruzione AVX2. Effettivamente è un processore piuttosto datato insieme a tutto il sistema che volevo cambiare. Ero intenzionato alle CPU AMD Ryzen ma in rete ho scoperto che dopo il 2022 i processori AMD non supportano più AVX2. Vi risulta? A me sembra veramente strano non poter installare la versione 15.1.1 su processori di ultima generazione, sto interpretando male io?grazie per il supporto

I need some help.When I upload photos to lrc and I'm in develop mode,when I move on to the next photo,it displays normally,but after two seconds it becomes darker than the original shot.What could be causing this?Or what am I doing wrong?

Hi! so i realised my backup was on the same hard drive as the original file. (i have 2 internal harddrives, one just for photography) so i tried to do the right thing and set the backup up on the other hard drive. Oh man, its been a nightmare! I have googled and read til my eyes bleed! I get the permissions thing. more googling, and some guy says set up and everybody and give full access, in desperation i tried it but my pc did not like it!! I have read about it here too, but my system doesnt match! I’m not sure im understanding, is it permissions to my hard drives? or within lightroom? I am using windows 10, waiting for the 11 upgrade! all the threads i bring up are so old, that the stream of commands are not on my pc! where do i find these permissions please? for now i have simply copied the LRCAT file to my backup hard drive, but doing that every day is a pain!  I have tried to set up a  new catalogue as some seem to get that to work, but even though i know exactly where the catalog

Hi everyone,I’m experiencing an issue where the lens profile for my DJI Air 3S Wide Camera (Model: FC9113) does not appear in Lightroom Classic, even though the DNG files are supported in Camera Raw 17.1.My Setup:Lightroom Classic Version: 14.1 (with Camera Raw 17.1)Drone Model: DJI Air 3SCameras:DJI Air 3S Telephoto Camera (FC9184)DJI Air 3S Wide-Angle Camera (FC9113)The Problem:Missing Lens Profile:The FC9113 lens profile exists in the correct directory:makefileCode kopierenC:\ProgramData\Adobe\CameraRaw\LensProfilesI can see the profile file named DJI FC9113 Adobe Standard.dcp in the folder, but it does not appear in the lens profile list in Lightroom Classic.Other Observations:The DJI Air 3S Telephoto Camera profile (FC9184) shows up correctly.The files are DNG format, and I have verified the metadata (Lens and Model are recognized as FC9113).Steps I Have Tried:Reinstalled Lightroom Classic and Camera Raw.Confirmed both are up-to-date (LrC 14.1 / ACR 17.1).Reset Lightroom preferenc

I am still trying to get LR Classic to work on new PC; every step is a new problem. I got my catalog onto C drive finally but now when opening get two error messages: “...issue with AI edits. Future edits may not be saved...” and more seriously, “lightroom encountered an error when reading from its previous cache and needs to quit.” I have tried everything online as to how to fix this and nothing changes. Any advanced ideas out there? Thanks.

Hello,Recently I bought a Windows 11 laptop specifically for using Lightroom and Photoshop. It's not state of the art high end, but the specifications made me think it would be enough to use Lightroom in a way that would be fast enough for me and my camera (Canon R5 MK2):13th Gen Intel Core i7-13700H 2.4ghz32 GB RAMGeForce RTX 40501TB SSDI have only been using it for 2 months and my catalog is very new and small.However: when starting up LR classic the welcome screen shows up shortly and then the screen stays grey for over 30 seconds. After that it takes another 20 seconds to build up all windows of the app and finally show the picture that was open when I closed it. Is it normal that it takes almost a minute to start up on a laptop like this?After that it's still quite laggy and it all feels like I'm running an old computer.When I check my Task Manager while starting up, the processor performance has a very little spike at clicking the LR button and after that it stays at around 6% fo

Don’t have access to old computer. Any work around with this. Its Lightroom 6. 

Hi, I’m using LR Classic (version 15.1.1 on MacOS) and was wondering if there’s a way in preferences or settings to turn off the Undo/Redo pop-up notifications?The pop-up is extremely distracting when editing and sometimes even blocks the area I'm editing. Thanks for any help or tips. Best,Thomas

After installed the macOS 26.4 beta 1 when I try to open LrC this message is coming: 

Hi,I recently switched from a MacBook to a Windows PC, and it seems to me that Lightroom Classic is not working properly — although Adobe support says everything is fine.The program runs very slowly. When using masks, there is a noticeable delay in the preview, and the image appears to jump or refresh. I’ve attached a video below showing the issue:https://youtu.be/Rdp1xHr3LAk?si=JiAgedctehGnfyoIIs this normal? On my MacBook M1 I never had any problems with smooth performance.I also noticed that when Lightroom Classic is open, the entire computer seems to slow down — even moving a Chrome window feels laggy and stutters. When the program is closed, everything becomes much smoother again.Here is my computer specification: AMD Ryzen 9 9950X3D ASUS Prime X870-P WIFI 192 GB DDR5 5200 MHz RAM RTX 5080 16 GB 2 TB Samsung 990 PRO M.2 (up to 7450 MB/s) 4 TB Samsung 990 PRO M.2 (up to 7450 MB/s) 4 TB Samsung 990 PRO M.2 (up to 7450 MB/s) 1200 W BeQuiet modular PSU Fractal Meshify

Hello,I'm wondering if anyone has figured out a way to make VSCO profiles & Lightroom Classic CC/ACR work with newer cameras that have yet to be updated by VSCO? Especially given the near-discontinuation of VSCO I think many would be interested in finding a workaround for this. I've tried a number of different things but no luck.To be clear my problem isn't with presets but rather the VSCO camera profiles.Things I've tried:1. renaming copies of existing VSCO Nikon profiles with the name of the new camera (i.e. Nikon d810>>>Nikon Z7 & Nikon d810>>>Nikon Z 7)2. Importing profiles via the dialogs in Lightroom Classic CC and ACR in PS CC 20193. deleting the Index.dat file in the CameraProfiles folder4. Moving profiles from CameraProfiles into the CameraSettings folderIncidentally, I'm on a Mac running LR Classic CC 8.1. I'm specifically working with Nikon Z 7 files but I imagine that the solution would be essentially the same for any given camera.Thanks in advance

When the Generative AI spot removal has been done before Denoise is applied, the removed areas that have been treated with the Remove tool aren’t treated. However, when Denoise is applied first, the Removal treats those areas properly. 

in Dev and Library mode: metadata is not showing up (spinning wheel constantly), keywords constantly say ‘working’ (grayed out), ratings not showing, nor stacking groups, or even the stack icon on top left. when helper file gets deleted, issue is resolved initially, and then breaks again. When rating images, if any rating shows, it does not get updated. LR 15.1.1  OS Version Number: 15.7.3

So, not a question as such, but after months of slow switching between photos on my top-of-the-line Macbook M5 w 32GB RAM & 2TB SSD HDD (it could take 20 seconds waiting for the next photo to show, using keyboard arrows), I have finally solved this extremely annoying issue.I have all files stored locally on my HDD, backing up to Dropbox.I pause Dropbox sync before opening LR.Lightning fast switching in Dev mode :-)I assume it’s the same for OneDrive; pause sync while working. Resume sync after finished your work in LR.Happy days

 In Lightroom version 15.1.1, when I try to select photos in the Library window, the program freezes, forcing me to force a task, as I can't close it otherwise. This only happens with version 15.1.1; it doesn't happen with other versions.

Mac - Lightroom Classic - All Current----------------------Collection SetFolder 1 holds 100 photos.  Sort:  Custom Order Create Folder 2.  Drag-drop 100 photos from Folder 1.  Order changes Delete Folder 2 Create Folder 3.  Change Sort to Custom Order Drag 100 photos from Folder 1 into Folder 3.  Order changes Set Folder 1 as Target Folder.  Repeat steps.  Order changesHow can I move 100 photos in a custom order to another folder without the order changing?Thanks.

For example, if I have 40 photos on my SD card but only want to import 10, which setting in the Lightroom Import window allows me to filter the view so that only the selected photos are shown, hiding the remaining 30?

I took a photograph of people riding on a bus, from the outside of the bus. As expected, there are window reflections on it. I tried to remove the reflections in LRC but it did not remove any of them. Moving the slider to -100 shows a black image, indicating LRC did not find reflections. I opened the same image in Camera Raw, and there the reflections were mostly removed. Moving the slider to -100 shows what Camera Raw detected as reflections. I don’t understand what is going on. Can you help? I am including relevant screen shots: Original Image, LRC 100 Removal, LRC -100 Removal, CR 100 Removal, CR -100 RemovalOriginal ImageLRC 100 RemovalLRC -100 RemovalCamera Raw 100 RemovalCamera Raw -100 RemovalMy system info:Lightroom Classic version: 15.1 [ 202512101606-1bb801a8 ]License: Creative CloudLanguage setting: en-USOperating system: Mac OS 26Version: 26.2.0 [25C56]Application architecture: arm64Logical processor count: 10Processor speed: NASqLite Version: 3.36.0Adobe GSDK Version: 1.4.

I can still print from Photoshop to the Epson 3880 as usual and from other non-Lightroom programs, but not from Lightroom.. I am running Windows 11 and LIghtroom 15.1., build 202601141538-a543b18a.. When I try to print to the Epson printer from Lightroom, the printing dialog box come up, but there is no spooling and it seems to abort prematurely. I reloaded the 3880 drivers, but no change. Would appreciate your thoughts. Thanks.