Questions

I’ve already searched the Creative Cloud app and the Adobe website, but Photoshop Beta never shows up as available to install. What’s the best way to sort this out?

I am not sure this is a bug becasue I think it has been occuring for a while.  When I use Generatve AI, I only get one version for the result instead of the expected three versions.  I am searching the internet for a solutions, but have not found it yet.  This is very frustrating, especially considering the high cost in credits to use some Generative AI models.Also, I am having occasional Workspace issues.  I occasionally lose the keyboard shortcut for  these issues, even if I go back to prior Workspace again.

Generative fill doesn't work (grayed out) when I select the entire workspace, either with the mouse or using Command+A.If I manually select an area, then it works correctly.Mac M3 pro, OS Tahoe 26.5 (25F71)Examples:with “ALL” selected not “ALL” selected 

The View/Proof Set-up is allowing a profile to be selected (in this case Working CMYK) but the Proof Colors menu item doesn’t act globally and switches itself off between every image. I’m not sure what Default profile it’s imposing but it’s very washed out and looks about 4 stops over-exposed. I must manually click the Proof Colors back on for every subsequent image. This certainly wasn’t the behavior in the previous version.  

Photoshop Beta 27.8.0 - Decontaminate Edge IssueOn this release, I am having issues enabling decontaminate edge in the refine mask window.  Output is set to create a new layer with layer mask.  I have tried all other output options with the same result.  Regardless of the settings I adjust in the refine mask window, decontaminate edge remains greyed out.  This was not an issue on the previous versions.  Has anyone experienced this issue and/or do you know of a solution?  

Brightness is blown out in PS Beta...Fine everywhere else.

Until recently my workflow has beenReduce to 1024 pixels on the long side (Is that still the limit?)Select AllCtrl Alt B to open Generative Filluse a prompt to change the image.  Since installing 27.8.0 m.3553 I now see this Prompt to edit  in the CTB and Ctrl Alt B is greyed out.Clicking the Prompt to edit button opens the Gen Fill window in the CTB, and I can’t access the larger Generative Fill dialog.   Am I missing something?  I usually use long prompts and that larger window is useful.Does Prompt to edit have any significance other than taking us the Prompt dialog? 

我的PS在打开图进入ACR是正常的，再次打开浸入PS，就是亮灰色，啥原因

Mijn photoshop wil niet meer openen in Creatieve Cloud. Hij heeft wel gewerkt, alleen gebruik ik het bijna nooit en weet dus ook niet sinds wanneer hij het niet meer doet. Als ik erop klik opent het beginscherm en begint hij vanalles te laden. Alleen na lezen kleurinstellingen stopt hij. Ik heb al vanalles geprobeerd maar niks werkt. Lightroom werkt wel goed.

일러스트, 에프터이펙트 모두 정상적인 속도로 작동하는데에프터이펙트보다 훨씬 적은 용량, 간단한 작업을 하는 포토샵이작동이 거의 안되는 수준으로 느리네요.한 컴퓨터에서만 그런것도 아니고 여러 컴퓨터에서 동일한 문제가 발생합니다.갑갑해 죽겠네요.무료 프로그램도 아니고, 월결제로 돈 받아먹으면서 오류 개선할 생각은 도무지 없는건지쓰면 쓸수록 소비자 기만행위라는 생각밖에 들지 않습니다.게다가 프로그램 오류에 대한 개선은 진행할 수 없다고 하네요??뭔 기업인지 이건 ㅉ

(MacOS) Beta 27.8 version of PS is arbitrarily changing the opacity of the Dodge/Burn/Saturate tools. I will set them to my personal default of 20% (using the ‘2’ key) and then when switching between tools or using another tool and then returning, it will have switched itself to a weird 55% opacity.  (This bug has been observed as “intermittent”) I pretty much only use the Beta version of PS and rarely have issues. This is the 2nd bug spotted today in 27.8. 

firmware .2727 when trying to have software select subject:error "can not complete your request  a pop up says Subject classifier model not loaded correctly.  

Hi, i just subscribed to Photography plan yesterday and looking for Photoshop beta in the creative cloud beta apps but i didn't found it . Is it normal ? (Windows 11, Creative Cloud 5.10 installed twice)   Thanks  

The new Gradient tool is awful please give us the option to use legacy gradient.

I have a 40 font type text logo on a 400x400 image size, being mathematically centred both horizontally and vertically, giving equal pixel distances at all 4 sides of the said text logo.When creating an increased image size and font type size to 50 font type and 500x500 image size, being mathematically centred, I am achieving equal pixel distances left and right of the said text logo but not above and below. There is 1 pixel difference with the vertical centre alignment, due to the nature of the font type increasing in size unequally. The Photoshop program chooses 159px at the top and 158px for the bottom. Is this correct protocol for mathematical vertical alignment?

When I isolate an object to rotate and chose Edit/Rotate Object the layer turns blank. Trying with different images and settings always results in the same blank layer. Sounds like a great feature, but I have not gotten it to work.

Adobe Photoshop Version: 27.5.0 20260316.m.3464 eb0251b  x64 (beta, PublicBeta)Operating System: Windows 10 64-bitVersion: 10 10.0.19045.6466Hello,I am experiencing a bug when using the Spot Healing Brush, Remove Tool, and Healing Brush in Adobe Photoshop.The tools behave unpredictably and produce anomalies that are difficult to describe. They do not follow the cursor movement. Instead, they start from a completely different location and perform actions that do not match my input.Steps to reproduce:Select any of the mentioned tools (Spot Healing Brush, Remove Tool, Healing Brush)Start brushing over an areaObserve that the stroke does not follow the cursor and jumps to another locationExpected result:The tool should follow the cursor precisely and apply corrections where I paint.Actual result:The tool starts from a different location and applies unexpected, incorrect movements.one click does this here is a video file that shows the behavior of the bughttps://photos.app.goo.gl/PAWhb7fsrf

Hi, I'm using Photoshop version 27.6 and my creative credits are full, but the 'Rotate Object' doesn’t work. Could someone please help me figure out why? Thanks so much!   

 when I import an image from Lightroom the system does not automatically go to photoshop unlike with other plugin . ie I have to minimise Lightroom in order to go to photoshop, why?

Photoshop Beta v27.7 keeps crashing my computer (not just the app) during mask edits. I installed the previous version and issue goes away. After reinstalling 27.7 back the same issue occurs again. 4x and counting. This happens when I open the mask window to edit a selection for masking <ctrl><alt><r> in windows desktop (11), The mask edit window opens but as soon as I start trying to edit, my computer crashes. I’ve currently reverted back to version (v27.6). It is working fine so far as of today.

Your standards are ridiculous.  You rejected an image because a girl was wearing a sleeveless top.  No nudity.  Just a bare shoulder.  THAT IS TOO RIGID!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  Hello, with today's new update, there have been some changes in the version (26.7 m.3051) action panel and its usage. With its new form, two options are offered, classic mode and new mode, but when any action consisting of several steps is run, it creates a single history status in the history panel and the remaining steps in the action are not displayed in the history panel. Is there a setting for this?   [Formatinf ifixed by Mod]  

When I try to add an adjustment to the layer such as: (curves, levels, hue/saturation) it appears as if it had been applied to the layer but I cannot control it or adjust it to my shape, the pop-up window does not appear to be able to control the adjustment

I am testing the harmonize feature on some sports samples to gauge capability.  I ran it on an individual player and it worked well.  However, when I rant it on this team/background combo it fails to run.  I’ve tried with various team/group images and it appears to only have issues when it is a group.  Any thoughts or suggestions on how to get harmonize to work with this type of situation would be greatly appreciated.  Samples of images reduced in size to be merged included below.Team Sample PNGBackground Sample:  

Bei Arbeitsfläche ändern, muss man jedes MAL die Maßeinheit neu auswählen (bei uns cm). Auch unter Voreinstellungen "Maßeinheiten & Lineale" kann man das nicht ändern, bzw. bringt es keine Lösung.