Questions

I'm used to an older version of Elements and can't figure out how to add a page to a project I'm working on. Did they remove this capability from 2023? I used to right click on the thumbnail and had the option of add a blank page or add a page with current layout. Now I only seem to be able to dupicate. 

Hello,I am a relatively new Adobe Photoshop Elements user who recently found out that when I save a file created using Photoshop Elements, Photoshop Elements will update the Date modified metadata to the current day and time / date AND, for one reason or another, also update the Date created metadata to the current date, for example, 24th September 2023 at whatever time. On 24th September 2023 (around that date), I opened one of my Photoshop Elements files to import and edit a photo. Then, I pressed the Ctrl and S hotkeys to open the Save or Save As window, located my opened file in the Save As window, left every setting as they were such as Layers and ICC, hit Save, and finally checked the Date modified and Date created metadata for my Photoshop Elements file in Windows File Explorer. Normally, what happens is that Photoshop Elements only changes Date modified. Date created stays the same as it should. Praise the Lord. But, this time, both Date modified AND Date created

Does the new Photoshop Elements 2023 support Canon CR3 files produced by the Canon R7 camera?

I can't find a new user guide for Photoshop Elements 2020 or for Premiere Elements 2020.  Are there new user guides for the 2020 versions?

My pen pressure doesn't work at all in Photoshop Elements 2023. The brushes don't have the Pen Pressure "design" either, they are just flat. The opacity setting doesn't work either. I use Huion drawing tablet (DWH69) and I have Windows 11. I've tried reinstalling the Huion Driver and the Photoshop, tried to change the tablet settings from Photoshop too, but nothing seems to work. The Pen Pressure does work in my other laptop, which still has Windows 10. Is the problem in Windows 11? Can someone tell me?

I have a Canon 5 D Mark III. I can't open Raw files. I think I need software to do so. Any ideas? 

Would very much appreicate it if anyone can help me with this:I'm using PSE 2022.  I used to have a Topaz plug-in called Topaz B&W Effects. (It's quite an old app, but I used to use it quite a bit.)Recently I had problems with my PC and I had to uninstall and then re-install Windows 10.Having done that, I had to reinstall all my old programs / apps.  I succeeded in downloading Topaz B&W Effects, but the problem is that PSE doesn't seem to be communicating with it. That is, when I try to access Topaz B&W Effects as a PSE plug-in, it isn't there! (It all used to work before I re-loaded Windows 10, but now it won't work.)Can anyone tell me how to fix this?  It would be very much appreciated. I would be glad of any suggestions.🙂

Clone stamp tool has stopped working properly.  Alt-Rclick seems to get response (sample circle turns to bullseye) but then get either "area to clone has not been defined" in some cases, but in others a selection is made and I can clone but the selection is in an incorrect area (not the area I selected to clone) and then I can't get it to change. Wierd.  Tried resetting general preferences on launch, resetting tool, resetting all tools. Sampling all layers (problem occurs even when only dealing with 1 (background) layer). I even tried a different mouse. I'm stumped.  Any other ideas? Windows 10.  Latest PS2020 updates. I'm reluctant to upgrade this old version now fearing I'll spend money only to have same problem.  Many thanks for any help.

No, I don't know when PSE 2024 will get released.No reason to put off getting prepared for it:  You will need to manually copy and paste things you installed into a folder on your computer that you can find.No, you do not need to uninstall a previous version:  IF YOU DO only do so after your catalogue is imported into the new version of the program.Each version of the program is a new version, and a new installation- your old version is never "upgraded" to a new version.If you have any other add-ons, such as elements plus (Elements+) you probably will have to purchase a new version of elements plus. There are probably other things, but not many, that you should make backup copies of, to me, these are the most important ones.

/Running Mac Ventura 13.5.1Photoshop Elements 2021Everything was working yesterday.  Now whenever I use the perspetice ctop tool the entire photo disappears.It was suggested to reset the tool - there is no option for me to do that 

I had PS ELLEMENTS on another computer but that computer has now been scrapped after it crashed so I want to instal PS ellements 14 on my new computer but it wont work and saying I have to uninstal from old computer 1st but that can't be done as computer went in bin,   Please help

When viewing some of my photos in Elements Organizer 2020, the Mark Face button on the lower ribbon is  grayed out (non-functional). This is not the case with other photos, and sometimes when I switch away from the photo where it is grayed out and then come back to it, the Mark Face button is now working. Can you help with this problem?

Hello friends.I'm somewhat new to restoring.  I've watched a few tutorials and tried using the healing brush and clone stamp, but I'm not getting anything that could be close to passable.  This is for personal use, so it doesn't need to be perfect, but the white streak is too distracting.Thanks,Kimberly

I installed Adobe elements last week, after initial setup it started the face analyzing aspect of the program I am going on 6 days and it is only at 66% it is completing about 3% a day and the rest of the program is too slow and unresponsive to use ....How long should this take to finish so I can start using the program?  I currently have about 22,000 pictures it is going through and I have taken the computer out of sleep mode so it is running 24/7.  At this rate I am still 2 weeks out from using the program this can not be normalThanks[Here is the list of all Adobe forums... https://forums.adobe.com/welcome][Moved from generic Cloud/Setup forum to the specific Program forum... Mod]

I've looked at all the verified correct answers all over the web. MacOS Sonora.  New (refurbished) intel iMac.  Clean install of Elements 2023.  Adobe RAW 14.5Unistalled, reinstalled, downloaded RAW installer and ran that seperately...  Nothing. Try to open a RAW file and no image or buttons/sliders are displayed.  The values that some of the sliders are set at are visible. I cannot downgrade to a previous OS.  If this isn't working for me because of my OS, it will very soon not work for a lot of people.  Anyone know how to fix this?  Thanks. 

Why does PS Elements sometimes save my work as .jpg, rather than .psd, and what difference does it make to me?

Have been using Elements 2018 on WIN 7 with no issues. Today, it won't load

How to open a blank page in Photoshop Elements 2019

Hi there, I have a copy of Photoshop elements that isn't printing correctly. When i go to press "Print" and choose the networked A3 printer Canon, and click printer. It prints to the networked Xerox printer, but then shows an error message saying that it couldn't find the printer status and fails.I removed the Xerox printer and attempted to print to the Canon again, only this time to find it was printing to PDF.I thought it might have been something to do with the Canon printer, so i uninstalled it and attempted another printer, for it to only do the same thing again, go to the PDF or another printer entirely.I am a little stumped and need help in order to print.Thanks in advance for all help received.

Please help with this situation. I have a pc running windows. I use Photoshop Elements 2020. When I try to import from my printer/scanner the printer does not show up as a divice I can choose. I have a new Epson 7840 all in one printer. I have talked with Epson and they say this is an Adobe problem. How can I get my Photoshop Elements to recognize my Epson printer so I can import from the scanner?

have  been  trialing PSE 2022  on  new  laptop,  but  when  I  tried  the  buy  button  ADOBE  have  sold  me  PSE 2023.  Nothing  I  have  tried  gets  me  2022  and  2023  will  not  load  on  windows 11.Cannot  find  a  way  to  contact  Adobe uk...  can  anyone  help?

Using Photoshop Elements to process raw images from Canon 5d Mark iii, images are grainy and ununsable.  They are fine when using Canon Photo Professional, 4 and they were also fine in earlier versions of Elements.  Any suggestions? 

I downloaded my PhotoShop V20.0 onto my new HP Envy All-In-One computer (windows 11 home). It no longer gives me either the "guided" or "expert" window tabs, only "quick". I've uninstalled and reinstalled. I've checked to make sure all my drivers are up to date. What do I do now? How do I get PhotoShop to open like it used to on my old computer? I'm used to using the "expert" window...

I downloaded my PhotoShop V20.0 onto my new HP Envy All-In-One computer (windows 11 home). It no longer gives me either the "guided" or "expert" window tabs, only "quick". I've uninstalled and reinstalled. I've checked to make sure all my drivers are up to date. What do I do now? How do I get PhotoShop to open like it used to on my old computer? I'm used to using the "expert" window...   [Moved to the Photoshop Elemens forum]

Do I have to plug my exrternal drive into my window 10 laptop in order to edit photos ?  guessing if  not plugged into external,  and I edit in organizer via lightroom and/or photoshop that any edits would have to be put back on the external to save all the edits? or deos in go into the pictures / hard drive on my laptop? with the corrections. After import the photos are in organizer to make it clear what I am not clear about is editing directly from the organizer without plugging the external?After import into external then it is in .organizer by default does it go into pictures on my laptop/hard drive automatically thus creadting a fuller c drive on the laptop? My eternal does not have its own drive? Becuase it does not I think that is why photos go into my pictures on my laptop, automatically (acting as a backup so to speak) I just realized that the external drive that I import photos to organizer -is not a backup, is that correct?