Questions

I use PE 2021 (Video Editor) on a WIN10 desktop.Normally I create videos by first adding clips from my HD Camcorder & then possibly adding JPEG files from a digital camera.  When I do this the Project Settings (Frame Sizes) are 1920 / 1080 as expected.  I generally apply the Pan & Zoom effect to the JPEG files. Now I intend to make a video only using JPEG files from the digital camera, applying the Pan & Zoom effect, adding titles & so on.  If I just add a JPEG to a new project the Project Settings (Frame Sizes) are 3840/2160 which, if I share & export, would by default be 4k (Ultra HD).  But given that I will be Panning & Zooming that might not be the best setting.  I'd be happy to have just HD.  I suppose one way would be to first import an HD video clip to set the project settings, add the photos & remove the video clip.  Any alternative advice? 

I found a similar question and answer, which was to edit the allowlisted_cards.txt file.  I can't get this to work.  Premiere shows the detected card exactly as shown in the screenshot below:When rendering, exporting, etc, only the CPU is used (at 100%), while the GPU stays at 2% or less.I have ver. 19.0 (20211007.daily.2243969) and get updates is grayed-out. Dan

Im in the process of buying a new laptop Im considering the Samsung Galaxy Book Pro which has an i5 2.4 1135GT processor rated 10161 on the passmark bench test.Can someone tell me if that would be adequate enough for video editing with  2021 Premiere ElementsThanks for your help

I have Premiere Elements 2021 and graphics card NVIDIA 1660. Video playback is breaking up, on the Edit -> Preferences -> General window is shown a message that this "GPU is not supported". Is there ane way to make Premiere Elements 2021 recognize this GPU?RegardsChris

I have adobe premier elements 2022.  The organizer loads and runs. The editor loads and runs. The video editor does not load. No error message. Nothing. Windows 10. Nvidea GeoForce GT 730 graphics card.  It worked once, then never again. I have downloaded and reinstalled the software

In saving my project in 2020 Premiere Elements, the saving timeline has stopped at 98% and won't finish. Any idea why? All is fine and all clips are rendered. 

I trimmed a 370 Mb zoom recording in half and the output is 970 Mb. I created a custom preset to "match source" which is 640x480. The estimated filesize is 170 Mb but the output is 970 Mb. How can I reduce this filesize please?

Earlier, I posted that I tried to install my Premiere Elements 2020 software, but the Installer's programming is outdated and incorrect. The Installer keeps on failing because it thinks that my PC does not have the updates to Windows 10 and my browser should be Internet Explorer. Please note that Microsoft has moved to Microsoft Edge instead of Internet Explorer at its browser so why should this Installer make it mandatory to check for Internet Explorer as my browser so it can proceed with the installation of Premiere. The suggested fixes on the Windows Registry as shown in the Adoble Support link to address this problem is also incorrect because Internet Explorer is not my browser. Is there a way to bypass the section where the Installer checks for Internet Explorer and other things so I can just install Adobe Premiere 2020 from the disk? Anyway I have a valid Serial number for Adobe Premiere Elements 2020 when I bought my software from B&H two years ago. If this is not possi

I purchased the Premiere and Photoshop Elements 2020 bundle and I only installed the Photoshop Elements two years ago with no problems. When I tried to install Premiere Elements on 2/23/22, I keep on getting the installation error that I needed to updated my Windows 10 OS and my browser which is Microsoft Edge. I have all the latest updates on my Windows 10 and for my Windows Edge browser, but I still am getting that persistent error message. I have followed all the suggestions I found on Adobe Help website as well as the results from Adobe saying that I needed to update the registry for Internet Explorer 11. All the suggested fixes do not work especially about their long explanation about changing the windows registry for Internet Explorer. Internet Explorer has been replaced by MS Edge long time ago and I don't use IE anymore. Please help me fix this installation problem so I can install Premiere Elements so I can use this to start working on my video project. as soon as possible. If

I have Premiere Elements 2020, and I have not used it for about 18 months now. I have not changed my Windows 10 PC  during that time. I was able to use Elements with no issue last time I tried. Anyway, when I launch the program I now get "we have detected an incompatible display driver...please update your display driver". I have checked in the device manager, the "display adapters" have the most up to date drivers installed. Same applies to the Monitors. I'm using an HP all in one machine as follows. Any help much appreciated  Device name DESKTOP-IL6NR0MProcessor Intel(R) Core(TM) i7-6700T CPU @ 2.80GHz 2.81 GHzInstalled RAM 16.0 GB (15.9 GB usable)Device ID 80670AD3-1D1E-482F-8BDE-7422CA2B9F06Product ID 00325-95940-56639-AAOEMSystem type 64-bit operating system, x64-based processorPen and touch No pen or touch input is available for this display Edition Windows 10 HomeVersion 20H2Installed on ‎12/‎03/‎2021OS build 19042.1526Experience Windows Feature Experien

Premiere Elements 2022 on windows 10. Trying to Archive a rather large project using the Copy option but the Archive errors out near the end (95%) of the copy with the error:Premiere Elements has encountered an error.[E:\adobe\pre\mezzanine\src\projectmanagerimpl.cpp-1816]Odd error since the E:\ drive is my DVD drive.16GB RAM and plenty of drive space on the BU drive as well as on the temporary files drives.Archiving using Archive Project works fine.I'm wondering if I have accidently deleted an asset that I'm not using but may still be in the Asset view. I scanned my assets but I don't know and couldn't find out what to look for an "orphaned" asset - one that is not longer where it was when I added it to assets. Thanks for any advice you can give.

Running Premiere Elements 2020 on a Windows 10 machine.   It used to be fine, but since I made the mistake of letting it load an update it won't work.    From the home screen, Organizer and Photo Editor seem to be fine, but selecting Video Editor gets me just a black bar with the text: "Loading Adobe Premiere Elements Editor Worspace" and a spinning wheel, which times out after a few seconds and goes no further.   Any ideas?   

Hello,I am experiencing stuttering in the timeline playback on my PC (please see specs): Radeon Software Version - 16.12.1Radeon Software Edition - Crimson ReLiveGraphics Chipset - AMD Radeon HD 7700 SeriesMemory Size - 2048 MBMemory Type - GDDR5Core Clock - 1000 MHzWindows Version - Windows 10 (64 bit)System Memory - 16 GBCPU Type - Intel(R) Core(TM) i7-3770 CPU @ 3.40GHzI am using .MOV files shot from my DSLR Nikon D5300 @ 1080p 60fps. I noticed the timeline preview playback is choppy, however when I export the final file the playback is fine when playing it on Windows. I have tried nearly all the Project settings to no resolution. All video card drivers are up to date.I tried this on my Surface Book laptop with dGPU and it has no problems with the timeline playback stutter, so I am not sure if this is a software issue or hardware issue on my PC.Any help is appreciated.

My Adobe Elements Premiere 2019 will not reinstall : the following message appears:"Update required.Your browser or operating system is no longer supported. You may need to install the latest operating system updates first."My Windows 10 is up to date and so are my browsers. I've already read that possibly Creative Cloud is a solution, but I don't understand why it can't be done without Creative Cloud. Are there any other solutions? Unfortunately, this is not the first problem with installing Premiere Elements.RegardsMatthias Translated with .DeepL.com/Translator  (free version)

Two tools I use a lot in Premiere Elements 2020 aren't working for me in the 2022 edition. Neither start making any progress.  They just get stuck on "Starting Auto Analyzer...".  Same video clips in 2020 analyze quickly. I'm very disappointed.  If anyone has any ideas please let me know. Thanks.

hp desktop just bought it 3 months ago, default programs installed so nothing major. RAM 16gb with 15/7 usableIntel Core i7-105...CPU @ 1.8GHz  2.3 GHzWindows 11.So originally program froze when I tried editing a movie consisiting of 5 videos. Camera used is an ultra s21 but 1080 videos not the 4k. Everything went fine until about 10 mins, then previews would stop showing and dragging anything would disappear, read on thread to lower preview quality so I did. Working better so Im trying something simple just to test and only editing 1 video....adding text to it and while text models are loading program starts slowing down until it crashes and then I get the DVA_PROD_NAME error code sending me to forums. Any idea? Im honestly considering returning this program with so many issues right off instalation.

Why this program will not let me install to a diffrent drive then C:I would like to install this program on a portable WD 4tb 

I just got an update notice for Premiere Elements 2022.Is there a detailed update notes on what's new or fixed in this version?Thank you

Hello, I am not a graphics professional, but have edited photos and created content for more than 20 years using Adobe's older free products. I stepped up to Premiere Elements, Photoshop and Organizer 2020 last year to scan old photos and create a family history wall. I am able to crop and finetune photos easily. I have been trying to create a slideshow in Organizer. First, the themes provided with the program are limited. Is there an online source for more? Second, about a third of the photos are trimmed back radically, and cut heads off below the shoulders. I have spent three weeks looking for a fix, but have not discovered a setting or fix. These products are great and more powerful than I can fully use. I am so frustrated I am planning to drop my subscription and move to something that is easier to use. Thank you.

I've just bought Premiere Elements 22.   In my football videos, the standard camcorder footage is fine (normal), but the Kaiser Baas action camera footage is regularly interrupted by green interference (see screenshots attached or below).   The action camera MP4s are playing fine on my laptop. They're only distorting once in my PE22 timeline (a little bit), and once saved into final video (a lot).   Any ideas why that would be happening, specifically for the action cam footage? Thanks, Rowan.

I just bought a new PC (Windows 10) and installed Premiere Elements and Photoshop Elements 13 (from my original program disks). Photoshop Elements 13 works fine.  Premiere Elements will launch fine, but as soon as I click the "Add Media" button the program immediately crashes. Any ideas?

I want to upgrade from 2013 to 2022. Is this quite old version entitled for the (cheaper) upgrade version?Will the new versionread the keys automatically from the old installed versionreplace the old version?RegardsTino

Hallihallo zusammen Auf meinem alten Laptop (Intel CPU, Nvidia GT GPU, Windows 7-10, leider nicht mehr existent) lief noch Premiere Elements 10 und da hatte ich eigentlich nie Probleme mit dem Brennen von DVDs/BDs oder dem Exportieren von ISO-Files. Dies als kleines Vorwort. Nun habe ich seit 2 jahren einen neuen Laptop (Intel CPU 8th Gen, Nvidia GTX GPU, Windows 10) mit einem externen BD Brenner von LG sowie neu einen PC (Intel CPU 10th Gen, - GPU, Windows 10) mit einem externen DVD Brenner von LG und beide laufen mit den neusten (Treiber-)Updates. Entsprechend gönnte ich mir dann auch das Upgrade von Photoshop und Premiere Elements auf die neusten 2022 Versionen. Vor den Festtagen versprach ich einer Schule auf privater Basis einen Film von ihrem Weihnachtsmusical zu erstellen. Die Schule möchte diesen Film als DVD den Kindern und Eltern (Welche wegen Covid19 teilweise nicht teilehmen konnten) zur Verfügung stellen und hat auch bereits eine entsprechende Bestellung auf

Hallo, beim Import von der Speicherkarte werden die Clips je 4 mal in die Videospur abgelegt. Also ein und der selbe Clip erscheint 4 mal. Kann jemand helfen? Gern auch unter XXX Danke schööön!   [personal info deleted by mod]

Hello,I use Premiere Elements 15 and  Windows 10.When I finished my last project, I exported it to MP4. Everything was ok.Now I added  text and more music (.WAV) and exported again.The result is not a MP4-file. Instead I get a M4V-file and a ACC-file.The size is the same (5.61GB). If I want to view the file, I get an error message (wrong format,....).What happened, that  I don't can export to MP4 as before?