Questions

  Please remove this, or just add an option to hide this

Ich besitze drei verschiedene Bluetooth-Kopfhörer:1 × Google Pixel Buds Pro 21 × ältere Beats-Kopfhörer1 × Jabra Evolve2 Bei den ersten beiden Kopfhörern ruckelt die Wiedergabe und der Ton kratzt komplett, wenn ich ein Video in Premiere Pro abspiele (siehe Video).https://youtube.com/shorts/hkSCp1JpRgsMit dem Jabra Evolve2 funktioniert alles problemlos. Wenn ich den Sound direkt über die Laptop-Lautsprecher wiedergebe, läuft ebenfalls alles einwandfrei.https://youtube.com/shorts/9xjf8C4Bd78 Ich habe bereits unter Voreinstellungen → Audiogeräte alles ausprobiert, gegoogelt und so weiter … aber leider keine Lösung gefunden. Hat jemand von euch eine Idee? 

I'm trying to create a .mogrt from within Premiere Pro, using the Properties panel. When I add a new rectangle layer to the graphic, it appears at 300x200 with the anchor at the center, 150x100. When I change the size of the rectangle to 960x540, the object scales around the center, but the anchor point numbers in the interface don't change. When I then try to set the anchor so that it scales from the top right, and that point is centered in the composition (the rectangle takes up the lower left corner), the anchor moves to a very different point on the object (the guide is centered). Premiere Pro 25.0.0 build 61Windows 11 Pro 23H2 build 22631.4602Lenovo T16

Hello,I would like to request your help please.We had subscribed to Adobe Premiere Pro to edit the stereoscopic videos recorded on Canon EOS R5 C Full-Frame Hybrid Camera with RF5.2mm F2.8 L Dual Fisheye Lens. These videos are meant to be viewed as immersive 3D videos on Apple Vision Pro. In spite of trying so hard and following help videos available on YouTube, we were not able to do do this successfully. We had two problems with this - Firstly, we could not view the edited clip as a proper rectangular video on the Vision Pro. It was still showing up as 2 shots, side by side for right eye and left eye. Secondly, we could not stitch the clips to create a single video. As a result, we had to stop the subscription to Adobe Premiere Pro.We have a sample stereoscopic video here, if you would like to take a look at: https://drive.google.com/file/d/1Q3XOwo0sPIcxPtG-zwePlSb_MccJS-VP/view?usp=share_linkLook forward to hearing back from you.Thank you.

Estoy intentando exportar una película en 4k y me sale este código de error.Probé cambiando el fotograma que cita e incluso eliminpe efectos de estabiklización, pero aún asdí sigue tirando este error: Error de exportaciónError al compilar la película.Error de procesamiento de GPUNo se puede procesar el fotograma.Escribiendo con el exportador: QuickTimeEscribiendo en el archivo: F:\Armado V07_4k_final-_1.movAlrededor del código de tiempo: 00:14:44:08Pr egundosComponente: EffectFilter del tipo GPUVideoFilterSelector: 17Código de error: -1609629695

Hello!I stumbled upon a bug. I cannot perform copy and paste function with Lumetri effect from Premiere Pro to After Effects and vice versa.I uninstalled everything from Adobe, including hidden settings and cookies, performed clean installation and it still doesn't work. Doing "replace with After Effects composition" - it works only with Warp Stabilizer, but ignores Lumetri effect. Doing Edit > Copy in Premiere Pro, then choosing After Effects and Edit > Paste also doesn't work.I'm really frustrated with Adobe. I pay a lot of money and basic functions just don't work.

Is there any diferences screen shot by Export Frame in Pr & screen shot by Sanagit? I mean pixel loss.   

So I downloaded Youtube Subscribe templates from my account at Artlist and when I open those folders there are usually first 3 folders (Fonts, Help, Premiere Pro) and if I open the Premiere fodler there are a .prproj file and also a folder called "Assets".I want to import them somehow into Premiere so I can have them in my Grapihics templates window so I can use them in all my projects, but I cant seem to understand how to do it correctly.I tried dragging the entire folder into the project bin but then I only get tons of weird files that I cant drag-drop onto the timeline. I also tried to import them via the "Install motion graphics" button and also the "Add aditional folder" buttons in the Graphics templates window and that doeasnt seem to work either?! Im confused...... I want all my templates to be shown like this: 

Buongiorno, riscontro problemi con l'audio di Premiere quando metto canzoni mp3 scaricate da computer, ma quando le metto nella timeline, non si sentono e mi da l'errore MME, ho provato a contattare l'assistenza del mio computer e reinstallato l'app molte volte e cercato di risolvere per conto mio, ma non è servito a niente (ho già reinstallato i driver di output del computer), grazie

Hi All, I’m editing 4K 59.94p H.264 footage (MP4 4:2:0) from the Canon R6 in Premiere Pro 22.2 (stability reasons), and my final exports are almost always H.264 for social media platforms. As H.264 isn’t Smart Rendering-compatible, I’m trying to figure out what the most time-efficient and practical workflow is for this kind of footage. I prefer not to use proxies as I find them cumbersome..  My key questions:How do you typically handle native H.264 4K 59.94p footage like this?Do you transcode on ingest, and if so, to what format?Are there workflows that allow using rendered previews during H.264 export, or is that only possible when exporting in intermediate formats? The goal is to minimize export time without compromising too much on quality or storage overhead.Curious to hear how other handle the workflow for H.264 footage.Thanks in advance! 

Hi! Please share if you have a solution. When I'm using my iPhone 15 pro max to make videos, using airdrop to get them to my Mac and then import these videos to premiere pro to start editing, Premiere pro changes the color settings of each clip and make them look very high exposed and sometimes the color scheme more matte than the original video on the phone. How do I ensure that the videos stay the same when I import them to premiere pro? 

How do I change the order in which the cameras appear in Premiere pro 2025? In 2024 the cameras appeared in the right order every time.  I labeled the cameras as I alway have.  I want to switch the top two camera positions so the editing flow is more natural. 

I want to use script to change text in a parameter MORGT file. Please help me how to use it, which the functions that Adobe Premiere supports for this. Thanks you so much!

i updated to the latest versions of both insta360 plugin (4.3.1) and premiere pro (22.4)  (os - win 11) d premiere pro projects just shut down after a minute of opening. when i delete the plugins,  premiere pro works fine.  i am working on a project that mostly has 'insta one r' videos.  without d pligins,  its a waste... what to do. 

Hello! Looking for some help! So I have never had this issue before but I am having issues with choppy footage after export. It's a wedding video with multiple shots including some drone footage. The drone footage and majority of other shots from my a7siii are 23.97 frame rate, with the exception of a few 60 fps shots from the a7siii. The playback within premiere pro is completely fine, no issues with lag at all. However, once exported everything plays as expected other than the drone shots - they are lagging pretty heavily - and it's exclusively the drone shots. Any ideas why it's doing this? I have tried increasing my export bitrate - all the way up to 50 VBR 2 pass and it does nothing at all.  I have also did the typical clearing of the cache, restarting the computer, tried exporting via media encoder etc. Some extra info: most shots are 4k and I scale them down to 1080p in the sequence (I like being able to zoom in on some shots with preserved quality,

Hello, I am trying to export a 1 hour 45 minute video and whether I export straight  from Premier pro or Media Encoder, it gets stuck at 99% and won't go past that. I was able to render the files fine, I tried leaving it over night, I have a very strong computer with more than enough space. I do 3 files, an audio file that I can hear, the video file that o can't see, and the mp4 file that has nothing on it. I think that the audio and video files are being made but it isn't mixing them together to make the mp4. I'm stuck

After months of editing an hour long wedding kind of aftermovie with countless back and forths with the client, once it was finalized, they asked to put it not in slow motion, but in normal speed 🫠But I dont see an easy way to do this, now. The way I worked the project is: -shot in 50fps -once imported in project on premiere, > interprate footage, assume this frame rate (25fps) -Footage brought like this after change in timelineNow when I try to double the speed (x200), it looks way too fast. I tried several things, but it seems like the only way I can do it is to bring back the shots (and choose the best part of each shot again..) one by one.If anyone understood my issue, would you know a faster way to put everything in normal speed again?Thank you kindly in advance

When I want to create an SRT file from caption text, there is no straightforward way to do that. However, in the latest version, there is an option to convert caption text to graphic text. so, is there any option allowed to convert Graphic text to Caption text?

I've repeatedly encountered a bug that is causing me some significant issues. I am running Premiere 25.2.3 (Build 4). I first noticed this issue last fall and hoped that subsequent updates would fix it, but that apparently hasn't happened, so I am reporting it here. I use Premiere to stitch together video files of oral history interviews. The editing that I do is usually very rudimentary, mostly involving using the razor tool to cut out pieces of an interview that we do not want included in the final access copy. I've successfully used Premiere to do this for many years. The problem that I'm now facing is that this version of Premiere sometimes repeats pieces of the audio track underneath the video file. In the example that I've encountered today, the first 13 minutes of the file play as expected, but at timestamp 0:13:01 the very beginning of the audio track starts to repeat underneath the video file and it continues as such for the remainder of the file. I've checked the or

Exporting an AAF from my Premiere project. I started a new timeline that was simply just the audio. I deleted any video. I have exported a separate reference file for my sound mixer. My problem is when I go to export the AAF, a new folder with the AAF media is created, which is great, but then once the process is finished, this folder deletes. I have no idea how to stop it from doing this, and then I can't send the media to my sound mixer. I've tried every variable of the settings in the aaf dialogue box, and no matter what, the AAF Media folder keeps getting deleted as soon as the process is done. It's not in my trash, it's just gone.

Hi, Experiencing extreme lag. I press play and it doesnt start playing for about 10 seconds. Impossible to edit now. I am assuming it's the new update as last week the same project worked fine. Timeline is about 35 mins long. no effets just cutting clips. Cleared Cache, downloaded versions older ( Now trying 25.1) having the same issues with them all. Relinked all media, nothing is working.Audio and frame errors too. For a prject that worked fine last week I am clueless now.

I'm looking for Adobe Premiere Pro 2022 (version 22.x).My Creative Cloud app only shows the latest version (2024), and there's no option to install older versions.Does anyone have a direct download link or an offline installer for Premiere Pro 2022?Or maybe a working portable version?I’d really appreciate any help! Thanks in advance.

I don't like having to use the online help. Is there a Premiere Pro user manual in PDF format? Thanks for any help

I'm SO CLOSE to finishing a project and just discovered that only audio on Track 1 is playing.  I've been editing for hours and this just suddenly happened.  Earlier today other Audio Tracks (2/3) WERE playing.  I had muted a Audio Track 2 earlier to better hear Track 1.  However I unmuted that track long ago.  Tracks 2 and 3 will not play any sound right now.  I deleted audio and replaced it again, no difference.  The M - mute buttons on the tracks are NOT selected. I tried selecting them and unselecting them, no change.  I closed and restarted Premier, no change.  I updated to the latest Premiere (didn't realize I was behind), no change.  Nothing is working and all I need to do is keyframe some background music to complete this project.  What is going on?

My brand new Mac Studio is having issues when I run Premiere Pro and Media Encoder at the same time. Premiere Pro quits on me, and I'm prompted with Force Quit and the message, "Your system has run out of application memory. "To avoid problems with your computer, quit any applications you are not using." This is odd given my computer specs:-Mac Studio, M1 Ultra, 20 Cores (16 performance and 4 efficiency) 128GBI opened activity monitor and saw that "PproHeadless" is open and running twice, and using 107 GB and also 58 GB. What is it??? It's clearly a part of premiere (Applications/Adobe Premiere Pro 2022/Adobe Premiere Pro 2022.app/Contents/PProHeadless.app/Contents/MacOS/PProHeadless), but why is it taking up so much memory?? I never had any issues like this with my 2013 Mac Pro tower, and I was JUST editing the same project on that computer before this one arrived.   What should I do to fix this???