Questions

Hi all! I'm a School Librarian and I want to create a video of a book reading. I would like the pre-made pictures on an illustrated page to have some movement, i.e. eyes rolling, a character 'walking' on a page, sun rising, etc.I am using Premiere to create my videos, but I'm not sure what I can use to animate. Is it Adobe Animate? Adobe Photoshop? Any advice would be greatly appreciated!Marie

I Tried In After Effects,Premiere Pro And Media Encoder.All Gives Me Error Compiling Movie When Exporting Using Hardware Encoding.It Does Not Crash It Just Says Error Compiling Movie.Software Encoding Works Fine. CPU: Intel Core I5 1135G7 @2.40 GhzRAM: 8 GBSSDGPU :1st : Intel(R)  Iris(R) Xe Graphics2nd :Nivida Geforce Mx 330 Fixes That I Tried But Didnt Work:Updating To The Latest Graphics DriverUpdating To The Latest (Premiere Pro/Media Encoder/After Effects) 2020 -> 2021 Version Refer To The Screenshot For The Error Popup  

Hello all - I have been encountering a problem with PP both 25 and the previous version. I am using a Dell XPS laptop (Intel i9, NVIDIA GEForce RTX 4060, 32 GB RAM) with Cirrus Logic sound driver.  And yes, every single driver - and Windows - is completely up to date. On every other non-Adobe application, the sound driver works perfectly. However, when I launch PP, within 2 minutes of any use, the sound driver gets disabled.  If I close PP though, within 2-5 minutes of exit, the sound driver mysteriously re-appears perfectly. I had Dell check out the laptop and they are saying that there's no problem with the laptop hardware or software settings. They think the problem is the Adobe PP software. Anyone have any thoughts?

Bonjour, j'ai des problèmes avec mes enregistrements OBS (sûrement dus à la durée du rush) par rapport à l'audio.J'essaie donc de régler le problème en raccordant le son à l'image sur Premiere Pro mais lorsque j'essaie de décaler l'audio avec ma souris, je suis obliger de décaler d'au minimum 25 centièmes, ce qui fait que l'audio est forcément en avance ou en retard, mais impossible de le synchroniser avec l'image.Si ce problème est réglable, faites moi savoir comment s'il vous plait.Par ailleurs, si vous savez comment régler le problème de base (provenant bien d'OBS et pas du logiciel de montage), je suis également preneur, même si nous ne sommes pas sur un forum dédié à OBS.Merci d'avance,Bonne journée.

I Found this under "What's new" for premiere.This should say "habanero" because there's no tilde lol

I opened a project that I started in 2018 and it has been through all the upgrades of PP. But today all the captions/subtitles was gone. Yhere wasnt even a track for the captions. I opened a new one but I couldnt fina any text or trace of it. Would appreciate any kind of help. kind regards Janne

We use MOGRT with many items, where many elements can be placed and can be configured, multiple videos. There are some problems with navigation within Essential Graphics Window: 1. We would like to be able to jump from setting to setting, or from text box to text box. If we press now tab-key, the curser jumps all over the place - not in the given order. 2. When we scoll over the menu, sometimes values gets changed, because of the mouse contact with some sliders, during the scrolling. Of course, we get used to place the mouse to the edge of the window, so it does not change stuff by scrolling. We would suggest, only activated rulers should change by scroll mouse - or there should be a short wait time, when the window is scrolling, there is no change possible for, lets say 1/2 second.

Bonjour, Petite question, j'ai un abonnement sans engagement, est ce que si je stoppe pendant quelques mois mon abonnement et que je le re-active par la suite, est ce que je perds mes projets ? Je vous remercie Cdt Guillaume

Привет! Кто-нибудь знает как решить эту проблему? Текст перестал отображаться, пробовал переустанавливать программу, откатываться на старые версии, сбрасывать кэш. Ничего не помогло 

I've been struggling with the crop effect to recreate typewruitter effect. My issue is: The crop effect applies to the full frame of the video, not just to the text frame. When applying the crop effect i aplpy it to the text frame directly. In the effects control panel i have "vector motion" and "text". Vector motion is the full video frame, text is just the text frame but when i add crop effect it cannot be dragged under the "text" it adds as a 3d seperate "layer" that when wplaced above text creates the crop effect, but it applies to the full frame and not just text. It looks like it applies to the vector motion not text.This's an issue because let's say i want to have a small text on the right side of the video frame, and for text to appear from left to right. With how it works right now there're timing dellayes and it's difficult to know when the sctual text is going to appear. Because the crop effect startes from the left side of the full frame not text farme.I'm quite new to prem

Hello all,I am editing a multicam sequence and the subject starts to drift to the right side halfway through the shot (it's a single). I'd like to simply readjust the framing so that she is centered again, but the edge of the frame is black. In Final Cut Pro, it is as easy as double clicking the Multicam track and editing the shot. In Premiere, I am totally lost as you can not "decompose" the two angles and edit seperatly 

Hi, I would really appreciate if someone could help me.I want to create quiz-style videos like “Guess the Emoji” and other similar formats – for example:https://www.youtube.com/watch?v=VugP8YaqUhwI know how to make these kinds of videos using Canva, but it’s not on the same level as Adobe.I haven’t found any tutorial that shows how to create this properly, and I have no experience with Adobe tools.I’d really love some guidance on how to learn to make videos like this.From what I understand, I’ll need to use Adobe Premiere Pro and After Effects.If anyone can help me with this, I would be super grateful.Thank you so much!

Premiere changes the color of my video when exporting on its own. The right is the original, the left is premiere's render. The only answer I can find to this is that the Retina display on mac shows the render differently or something, but this is not the issue. It looks compeltely garbage everywhere else as well

If I scrub through my timeline and set the playback resolution in the program monitor to full, it works fine. If I set the playback resolution to anything other than full, such as 1/2 or 1/4, the playback lags and freezes.In playback, it is the opposite: lagging at full and smooth at 1/2 or 1/4, so I always have to change the playback resolution to full when scrubbing and to 1/4 when playing.Scrub fine at full and lag at 1/4. How is this possible? Is this a bug? Footage:From a DJI Avata drone, exported from Gyroflow and pasted into a timeline with the same specs as the footage. The timeline is 1 minute long.Test with all effects off.Media Cache on SSDFootage on HD Software:Premiere Pro 24.3.0 PC: Prozessor 13th Gen Intel(R) Core(TM) i9-13900K 3.00 GHzRAM 128 GB Systemtyp 64-Bit-Betriebssystem, x64-basierter ProzessorNVIDIA GeForce RTX 3060  

Is it possible to export video in color range 0-255 in HEVC or 264? How to do it?

Hello, I have a couple questions related to a react app plugin in a ppro uxp panel.  1. I have my react app working just fine, with version react 16, is there any plans/timeline to allow newer react versions, perhaps 18?  2. I'm developing this app for a company that wants to integrate outside resources into a ppro panel, this seems to be working fine early on, but I'm developing the UXP implementation on ppro beta.  I was wondering if there is a timeline for a stable ppro to have these uxp features?  My understanding was that uxp is not fully released yet for the current stable, is that correct?  3. I'm using npm with this uxp react panel, and it seems to come with "acord-with-stage3" pre-installed, this is in my package.json (tho does not seem to be included in my dependencies):   "resolutions": {     "acorn": "npm:acorn-with-stage3"   }but it seems to be causing me some issues when installing other packages, it gives me this er

So, I've been having this issue ever since I started using Premiere Pro back in 2020, but I just crossed my mind now.  I'm working on a Premiere Pro project on my MacBook. I add pictures, shapes, sounds into the timeline and it shows on the Program Monitor (the visual area that mimics what's on the timeline. There are time instead of having to move or scale items on the Effects Control, I use my cursor to click, move, and shrink items on the program monitor. Then, I take a break and close the lid or put my MacBook to sleep. I come back in about 10 minutes, log back into my MacBook and now I cannot use my cursor to select anything on the program monitor; I have to use the Effects Control to move, scale, rotate, etc.  I did notice if I select an item on the Program Monitor before putting my computer to sleep, then wake it up again, this keeps the Premiere Pro to allow me to keep moving items. If not, I have to close Premiere Pro and open it again in order for me to mo

I'm not sure as to what I should do I've factory reset my premier I've cleared the cache all my drivers are updated even rendering the video doesnt fix it please help.

I am using the BlackMagic Ultrastudio Monitor 3g on a m2 max with 32 gigs ram. still playback of HD 25i (1080i) timelines is stuttering - even playback of prores proxies lags. In resolve it works perfectly fine. Does anyone have a solution?

This is a small annoyance but just seeing if anyone might have an answer for me.I have a workspace that I created and when I create a new project the project panel never comes in how I save the workspace. Below is how I have saved the workspace. And here is how it comes in when I create a new project. You can see the project panel is now on my second monitor stacked with the Lumetri color panel and effects controls.

while importing .srt files, sometimes only half the content showslike if i have a .srt with 5min of content only 2-3min of content appears in premiere pro CC 2018. please help !

    I usually work the project on my laptop at home, but these day I hope I'm able to work on my office computer when I have free time during workday.     So is there any way that I can save the project file in the creative cloud and then open the file up in another computer with creative cloud? And do I also need to backup all my video files I have used in the project?

Does anyone know if in this new version of Premiere (25.2), the bug of Premiere crashing during transcription present in Macos Sequoia has been fixed?

So i'm having this issue, when i open a project and start editing suddenly my timeline doesn't respond when scrubbing or select a file and in source monitor goes black or freezes, also if i put my cursor on the file in the bin it says media pending. It take at least 5-10seconds to respond again until it does it again after a while.I open task manager while edit to see what happens. Cpu/Ram seems fine, only the scratch disk that i have for my files shows unexpected disk usage 100% when this happens in premiere. Premiere pro CC 2018 v.12My setup :  CPU: I7-8700 GPU: GTX 1070 8GB RAM: 32GB 3200MHZ MOBO: Z370 ASUS ROG   Samsung 960 EVO Nvme M.2 500gb (win 10 & apps only) Sandisk ssd 500gb : Scratch disk  Samsung 860 evo 500gb : adobe media cache  2 x 8TB hdd as storage

I cannot import the video clips I have in my libraries into Premier Pro. I tried creating different folders and uploading a simple image, but it still doesn't work. When I drag them into my sequence, I get a no sign signal.