Questions

Hi,I can’t upgrade from the 25.2.3 version, because if I do so I experience an import issue with all .MTS files. Only with .MTS files.In short:.MTS file import works fine with version 25.2.3. I can use any .MTS files and it works just fine. in later versions only the .MTS file import fails. There is no error message. Nothing happens. I cleared media cache, tried the import using the Media Browser panel rather than File and Import. I have Dolby codec installed.I’m using Windows11 Enterprise 24H2 version. Fort he video card I use NVIDIA GeForce RTX 3060, 576.02. We had audio issue with later NVIDIA versions in Premiere Pro therefore we are using this version.Could you please give me solutions for the issue?Thank you.

I can’t be the only one going through this, but whenever i save a project and then reopen it, 20% of the times it doesn’t load the sequence with it and my whole project is lost. I’m also running into an issue where when i open a project is has clips and files from previous projects inside of it even though i start fresh every time i start a new project. I spent hours creating BINS to have files in just to have them all gone when opening a save that i had saved minutes before. 

This is one of the most frustrating things I've encountered from Adobe Premiere. The Dynamic Link breaks every time I save a project in After Effects. I will save my "linked" After Effects project, go back to Premiere and it breaks the link EVERY TIME. This has been going on so long I just re-link it every time and say "Im switching to Da Vinci". I have the most up to date Premiere and After Effects.    This doesn't happen just once, or right after I open the program. No names are changed, no locations of projects or files change, just every time I hit save....boom, Premiere blows up.   This is unacceptable from a company like Adobe and I can't believe this hasn't been fixed.    See link. Screen on the right in AE and then left is PP. You can watch it happen over and over and over again, just like I do!   [Moderator note: moved to Bug section of forum posts.]

Hello dear group,I was having the most ridiculous problems with Premiere 2026 and After Effects 2026 , particularly with their integration. Every time I try to resize the windows in the workspace, the application stops working. I was performing very trivial operations in Premiere 2026, and it kept crashing. To be fair, the next day the situation improved—except when I tried to drag a guide, at which point the same issue occurred again. I’ve been very careful not to make any unnecessary movements.Yesterday, when I converted a Premiere clip into an After Effects composition (AE 2026), I encountered the same problem multiple times—this time in After Effects. I’m even embarrassed to report such a trivial issue, but it is what it is. I just spent two hours reopening the app, restarting my computer, and so on.I’m not very hopeful, but if anyone has any insights or advice about this ridiculous situation, I would be very grateful. Thank you. 

Hi , I have anissue with adobe premiere 2020 with not allowing me change the text for simple text. I thought the issue from the file I am working witih, but unfortunatily I tried that with new project and the issue still exist.it is not reponding to me while I want to change the font ftom the listMy os is windows 10. here is a image for the issue.

IMAC M1 2021 16Go Tahoe 26.3.1PP 26.0.2 ou PP 26.3 Beta same issue Hi everyone, sorry for my English.I've been trying for a while to animate masks in the effects options like I used to... and I can't seem to do it anymore.I create my keyframes, but when I move the playhead and change the mask path, nothing happens. And when I create a keyframe manually, there's no animation.Tracking works.But manually animating a mask path no longer works, whether the mask is assigned or not.Thanks for your help.

When attempting to transcribe my sequence, the auto captions load bar gets stuck at Beginning Language Pack Download. Any fixes would be appreciated.

I have this clip that i filmed and i think the audio is destroyed. I’m wondering if there is a way to fix it or is it too far gone? This is just a tiny clip but the whole audio is like this. thanks in advance 

「00:00」という表記のタイマー（カウントアップ）を作成したく、「：」の位置を固定するために等幅フォントをいくつか試したのですが、どうしても「：」が左右に動いてしまいます。 下記のフォントを試しました。Brandon GrotesqueCoordinates VariableInterstate MonoNovel Mono 「：」の位置を固定できるのは、等幅フォントの中でも限られたフォントなのでしょうか？シンプルな書体でおすすめのフォントがあれば教えていただきたいです。 また、After Effectsフォーラムの「カウントダウン。１の位と１０の位の位置を固定させたい。」という質問ページに「番号エフェクトのプロポーショナルを無効化」で解決されたとあったので試しましたが、番号エフェクトを適用すると、あらかじめ用意しておいたテキストが非表示になり、「0.000」というテキストに置き換わってしまい、解決できませんでした。 よろしくお願いいたします。  

VIDEO ALSO POSTED,,,,,, I NEED 4K60FPS WITHOUT SEEK LAG,, HERES THE PROBLEM I AM FACING (PROBLEM VIDEO LINK IS ALSO GIVEN) ... I SEEK ONE VIDEO BACK AND FORTH IT INSTANTLY PLAYS BUT IN MY CHANNEL 1 VIDEO ( THANOS POWERSHOW) WHEN I SEEK FORWARD OR BACKWARD IT LAGS FOR 4-5 SEC AND ONE MORE THING IN STATS FOR NERD THAT CHANNEL BUFFERING HEALTH IS FULL YELLOW/GREEN MEANS VERY GOOD MY BUFFER HEALTH VERY BAD, ITS A VERY WEIRD ERROR I HAVE PREMEIRE 20 TO 26 ... OR THIS ISSUE OF KEYFRAME ?? OR hlg ? AS IN EXPORT WINDOW OUTPUT FILE ITS REC709 AND IT SHOWS HLG100 ALSO, PLS GUIDE IN DETAISL I CAN SEEK ON THAT GOOD VIDEO INSTANT AS MY INTERNET IS NOT THE CULPRIT, OR ANY 4K60FPS INSTANT PLAY IF I FAST FORWARD OR BACK BUT IN MY VIDEO IT LAGS 4 SEC, PLS HELP, I EXPORT IN 4K60FPS CBR 80 MAX RES MAX DEPTH REC709 AND HLG100 ALSO SHOWS THERE, MADAD KIJIYE 

I have tried absoulely everything to log into my Frame.io account but each time I add my login creditentials it refreshes the page and asks me to login again. I have tried everything I can think of to fix this: clearing the cache, cookies, opening in an incognito window, restarting my computer--even opening a brand new account with a new email and NOTHING is working. Can someone please help me figure out why I can't get logged into my account? I am a paying customer of Adobe and not being able to log in is preventing me from beinng able to work with my editors and do my job. Please advise, thank you. 

Premiere 2026The copy clip function from one sequence to another often doesn't work. It works 5 times, then 3 times not work.Then it doesn't work 5 times, then 20 times work.I checked the keyboard, set the copy function to mouse buttons, but it didn't help.I looked in the hotkey settings, but the function doesn't overlap.I installed several versions of Premiere, then installed 25.6.4, and the same thing happens everywhere.Everything works fine in version 2024 (I upgraded from that to 26).Has anyone encountered a similar problem?

constant relinking media and preparing audio when opening a project, for me this project was created on a portable HD via Macbook Pro M4 Max 64GB and this project hasn't been opened on another device so the path has stayed the same since creation, I have followed the clear cache, resaved media etc which I have found online, this is the first project this has been an issue for me, any new updates people may have. thanks

Hi everyone,I'm having trouble removing pauses in the transcription panel in Adobe Premiere Pro. I’ve highlighted the pauses in the transcript, but it won’t let me delete them. I’ve tried disabling the "Pauses" feature and making edits directly on the timeline, but nothing seems to work. The delete button is grey, can't select it.Here’s a bit more info:I’m using the latest version of Premiere Pro.I’m working on a podcast episode, so there are lots of pauses I’d like to eliminate to streamline the edit.Has anyone else encountered this issue, or does anyone know a workaround? Any advice would be greatly appreciated!Thank you in advance!

Hello everyone.I had to do a full Recovery on my computer, Therefore I had to reinstall Premiere Pro. In the past I save my keyboard shortcuts file under this folder:C-User-Username-Documents-Adobe Premiere Pro-26-Profile-WinAlso, I copied it Inside Profile, and still not showingThanks.

Estou editando um clipe dentro de uma sequencia aninhada, porém simplesmente a partir de um take fica com tela preta, mesmo estendendo o clipe dentro da sequencia aninhada e deixando ele com duração longa, na hora que animado alguns keyframes de velocidade a tela fica preta. Já conferi se não errei em alguma animação e simplesmente não.Eu animo em 200x de velocidade e o take de 50s deveria ficar com 25s porém na prática nos primeiros segundos já fica com tela preta e não tem EXPLICAÇÃO pra onde foi parar a continuação do take, pois entrando na sequencia aninhada ainda tem muito tempo de take pra rodar, mesmo acelerado não acabaria ali. Isso já me ocupou muito tempo tentando achar uma solução e simplesmente não acho. Tá complicado lidar com o premiere, bug atrás de bug mesmo com uma configuração de computador potente. Lag não é problema, e sim os bugs.  

Hi, I am new to PP and have installed a motion graphics template from Envato. The text changes for each scene seem simple enough however unlike the preview of the template (Clean Business History Timeline Presentation) only has one image throughout the whole presentation.. how do I import a new image for each scene?Thanks in adavanceKind regardsColin

For anyone going to NAB/2026 in Vegas next week, I’ll be there and would love to meet up. Private message via the forum works well, but also, if you check in with the Adobe booth, normally they can tell when they’ve seen me recently. Neil

you recently moved masks from the effects panel to the toolbar.please don't do that. We have workflows that get interrupted when you do dumb - like this. When you improve/upgrade something, leave its location alone or at least have an option to leave it where it is.It’s so annoying to be in the middle of a project and have to relearn how to do something because your designers got cute. Mod note: Edited for language. Please keep posts free of profanity. See Adobe Community Guidelines: [link].

I am trying to create a sequence with the same source clip in two regions of the screen in a sequence.  I want to show one with no LUT applied and another with the LUT applied.  I’m trying to create a video that compares LUTs for the same input.  Whenever I select either “None” or one of the LUTs, it applies it to both source clips.  I can apply different color settings under the “Edit” tab of the Lumetri Color tab and that works.  But when I select a LUT, it applies it to all the source clips. Maybe this is what I’m messing up: I am not sure how the controls to the left of each clip in the Sequence panel works.  Here is my current selections:  What do the “V1” and “V2” buttons do?  Toggling them on and off doesn’t change the sequence as far as I can see…  

Hi Adobe Exchange Support Team,   I’m currently developing a CEP extension for Adobe Premiere Pro and need urgent guidance on digital signing and certification for distribution. We’re running into a widespread issue: all major certificate authorities have recently restricted the ability to export .p12 and .pfx files due to private key security protocols. This has effectively blocked traditional signing methods required for Adobe Exchange. We are now exploring cloud-based code signing options as a potential workaround — and possibly the only viable path forward. If Adobe has any officially recommended providers or documentation on how to sign CEP extensions using cloud signing infrastructure, we would greatly appreciate direct links and guidance on how to proceed. Our goal is to get this extension signed and approved for Adobe Exchange as soon as possible. Any help you can provide to expedite this process would be incredibly valuabl

The Apple ProRes 422 Proxy preset that I usually use on my footage is locked into a color space which doesn’t work for the footage. If I make proxies like that, the overexposure gets baked in and whatever Color settings I have on source clips or sequence settings will fail to right them. This is especially crucial because I’m working in a workflow where I will hand the project off to the editor with proxies only for them to cut (low budget project, all of the footage of the feature cannot fit on one drive) The overexposed look baked into proxies using the preset Apple ProRes 422 Proxy with dimensions downscaled to 1,280x675. The only settings that allow the export color space to be changed are the non-proxy presets meant for transcoding. IE this Adobe Stock 4K DCI with Audio (Apple ProRes 422 HQ), where I change the Export Color Space to Rec 2100 PQ to get the raw, flat look (which then creates a proxy which works better with the Auto Detect project setting in Lumetri Color). Even when

I have to work with small masks and every time I try to in premiere pro, it doesnt give me the little open hand symbol to let me move it around, even if I zoom in to like 400%. I press the shortcut "v" to get to the normal mouse, and go try and move the mask and the only two options it gives me is to move one of the points with the little "o" sybol next to the pointer or it gives me the option to make a new point with the pen. It gets real annoying when I have to open After Effects and link a file when premiere pro is supposed to be a profesional editing program. Either tell me how the hell to move tiny masks or FIX THIS

This is not really a question, but an answer. My answer, anyway. (Dammit - Had an even longer explanation of all this but Adobe wiped it all out when I went to “edit” it. Grrrr. So here goes a shorter statement...) When exporting using Media Encoder video looks washed out. When NOT using Media Encoder, video looks the same (as what you see in your Program Monitor.) This problem IS real. It’s subtle but clear and often UNACCEPTABLE. And there is no “fix”. It is very apparent when using QT for playback, and, more critically, for me, as videos show/play on Vimeo. I had for a time applied a Gamma Correction LUT on export to restore some of the contrast which had been lost (adding it under EFFECTS in the export settings.) I didn't like it, but it seemed to fix the problem. But what was it doing to everything else? I don’t know, but it probably wasn't good. I stopped using it over time, thinking, I guess, “Adobe must have fixed this problem by now.” But no...) After many hours / days / month

I started yesterday to work on Premiere Pro 2026 and have been experiencing the following issue: when editing with headphones, the audio track on channels 1 and 2 come out only from my left headphone, and channels 3 and forward are muted even if the “M” button is obviously off. Without headphones the problem doesn’t exist. I have already checked the settings on “Audio Channels”  and it is set to Stereo L+R, so the issue really doesn’t make sense.I am not experiencing this issue on the 2025 version or on the Beta version, while using the same settings.Applying audio effects such as Fill also doesn’t work - and even if it did it would be highly impractical to apply an effect to each audio track for this purpose. I have also checked with colleagues and compared settings - mine seems to be an isolated case. Is there anyone who could help me fixing this? It is really a drag. Thank you!