Questions

I am looking for an efficient way to "Fit to Page" on the new Adobe reader. Luckily there is a way to do what that button from Adobe Reader DC did: Click the View icon (bottom right below rotate button), Click Fit height, Click the View icon again, Click Enable scrolling. So now instead of accomplishing this using an icon at the top with a single click, it requires 4 clicks and navigating a small menu twice. Is there any way to set the default view to accomplish this more easily? Old Version: Adobe Reader DCNew Version: Adobe Acrobat Reader 2025.001.20435 | 64-bit Thanks!

For the past two weeks I have been trying to trouble shoot two users who are unable to sign documents with a smart card certificat or save PDF documents. what I have tried so far is as follows I have ensured they are using the most current version of Adobe Acrobat DCI have ensured there copy is active using acrobat distillerI have repaired installationI have attempted to save documents as a optimized PDF recieved a cannot save error 105I attempted to print to PDF recieved a cannot save error 105I attempted to extract pages and save, same errorI cleared the local cacheI cleared the certificat cacheI ensured FIPS was off in registry and double checked in local policy At this point I am not sure what else to try.

Recently I have downloaded Aadhaar from uiadi. gov. in and opened in Adobe Acrobat to validate the signature. I could successfully validate the signature, but couldn't save the validated Aadhaar. 

Hello everyone, I chose "combine files into a single PDF" and selected "larger file size" in the options, then I added 212 png-files and clicked "combine". In the resulting pdf the text is surrounded by a lot of grey pixels that were not there in the original png-file. Here is a screenshot for comparison. Above the png, below the resulting pdf. Why does Acrobat do that and how to make it stop doing it?

I have created a web based RGB PDF file from Indesign (exported using RGB and images colours only) which when previewed in web browser it changes only one section of text colour from Green to Purple, and when downloaded and openned has no issue - Does anyone have any knowledge why this is happening and provide steps to fix? Many thanks!

Hello,I am preparing a form for our shipping department and I have it set up to calculate taxes, palletizing, etc and give a total.  At first, it was giving me numbers with a bunch of decimal places like $37.555555557778 so I set the format to number and 2 decimals.  It also makes an unwanted zero appear in that space even though no data has been entered yet.  How can I fix this?  I want my calculations to remain the same and for the numbers to only display 2 decimal places but I don't want the zero there because we sometimes have to fill out the form manually.  I have very little experience with java script, I read up on some things but they do not make any sense to me.  If there is a flat out formula you know that I can just copy and paste to the custom format box that achieves this, please just let me know.  I greatly appreciate any help and thank you for your time.  If this post is duplicated, I apologize, I think I posted it in the wrong are

How do I change the default setting to turn off printing on both sides?

Is it possible to fix the problem of large files lagging when scrolling and then go back to page one

i need a font by the name of adobe sans mm

I am a newbie to creating a form that has calculations so please bear with me. I am using Adobe Acrobat Standard DC, version 2015.006.30434.I created a "Personal Financial Statement" form and am struggling with getting the calculation for net worth to work. I have a column that totals Total_Assets and a column that totals Total_Liabilities but I cannot get the calculation for Net_Worth to work. Currently I have the calculation in the Simplified field notation as Total_Assets-Total_Liabilities. What am I doing wrong? Any help would be appreciated!Thank you!Brenda

I have a simple PDF fillable net worth statement where the addition of two calculated fields does not add together correctly. The net worth statement consists of a "Value" column, a "Liabilities relating to that Value" column a "Net Value" column. Some of the values may be left blank if not applicable. The Net Value works fine (Value-Liabilities relating to that Value)The net worth statement is broken into two sections (financial assets and fixed assets), with subtotals in each section. The subtotals work fine. The problem is with the net worth number where the subtotals for the two sections are added together for the Net Worth is the wrong number.The net worth number sometimes works and sometimes doesn't. Also, when a number is removed in the top section from the Value column the correct total appears in the net worth field.The statement has been working fine for the last 3 years and this issue just recently started.I have not found anything in the Community that helps with this. Also

Is it possible to use a drop down menu with images? If so, how does that work?

Hi, I want to redact and maintain full quality, how do I do this?I need to perform some OCR after redaction, when the file shrinks the OCR doesn't do so well.I tried unchecking "Save as optimize for Fast Web View"  No luck there.  File still gets shrunk automatically.  See screenshot below. Whenever I redact the data, and hit Apply, the file size is automatically reduced.  I just want the data being redacted to be removed, but I want the quality to be the same.  Thank you! 🙂

Hello,when I try to save in Pdf/A I get this error:I tried following other directions on this forum but they did not help. Also attempted reinstallation. The problem remains. I ask for a quick and decisive intervention.Thank you very much in advance,Marco

I am trying to save a pdf as pdf/a as apaprently this fixes an other bug in illustrator opening iot with garbled characters I get the attached image.  Any ideas how to fix this? Cheers

"Falha ao carregar arquivo   Não conseguimos estabelecer nenhuma conexão bem-sucedida com o servidor. Salve seu contrato como um rascunho e tente novamente mais tarde.   código do erro: 403"   <cancelar> <salvar como rascunho>   Alguém pode me ajudar?

Hello,   For the last two years I have had consistent problems with Acrobat Pro DC being extremely slow/stuttery while scrolling, highlighting, commenting on a document. This happens no matter what the size of the PDF is from less than 1 MB to 10+ MB. It appears to be very poorly optimized compared to other professional software titles which all run smoothly on macOS: Word, Excel, Pages, Numbers, etc. I have tried deleting the prefernce files outlined in other topics, which did nothing to alleviate the issue at all.   My computer is a relatively powerful: 2016 15-inch MacBook Pro connected to an eGPU with Radeon RX 580 and an LG 4K monitor (more than enough power to edit PDFs). I am running the latest version of Adobe Acrobat Pro DC and macOS Mojave and have never seen these issues alleviated by two years of updates.   Given the cost of this software, I would really appreciate some help from Adobe's support team, as well as an indication that they are planning on doing s

The question in the subject is rhetorical, because as of now the answer is "yes." I'm an attorney. I was testing AI Assistant by asking questions regarding a brief in a real world criminal case. AI Assistant refused to respond to several questions, indicating "the document, the question, or the response" violated "User Guidelines." Seriously? Imagine: guns and violence in a brief involving a criminal case. I thought attorneys were part of this product's target market. At this point, it's useless for any attorney doing criminal work. I can easily see it being useless for some species of civil work as well (for example, briefs involving allegations of s________l harassment).* Luckily, I have about a week left in which I can get a refund. I'm glad I caught it now rather than later. *Ha! I received this warning when I tried to publish the post: "The message body contains s________l, which is not permitted in this community." So I had to obfuscate it like a scolded teenager.

In learning using the Accessibilty feaure in Acrobat Pro I have discovered the possibility I am missing some features. In trying to activate "MakeAccessible.api" which is showing not loaded. Then I go over to Preferences tab and discover an item possibly missing from this menu as well. Then I check the Windows/New Workspace  and this is not an option. I have also explored trying to use the CC app to install updates. Running in Legacy mode, although have also tried the New version of Acrobat Pro. May be I should try remove and re-install as a last resort. However, just wanted to see if this is the norm for AA Pro?Thanks 

When a customer signs on tablet computer that is then printed as a PDF, will the signature automatically convert to an image (jpeg, PNG, BMP) or will it just render like the text?  If I right-click a signature on a PDF and get the blue box and a "Save as" with image extension , does this mean someone added the image of the signature?  I ask this because I signed on a tablet and see that the other party duplicated my signature somehow and put it into another part of the document that I did not see on the tablet or agree to.  I realize this is probably fraud but I need to know if it proves my sig was added because I can right-click it and it gets the blue box and the Save As shows it is an image that can be saved on its own separate from document.

Hello, we are trying to figure out why certain fields are missing when we choose the "Prepare a Form" option. This is missing in the "Text Field Properties" pop-up when you double click. Some documents have this and some don't. Please refer to the photos for additonal clarification.  

Hello everybody, I need to change the field labels that may be included into a "Custom Digital Signature Appearance" in Acrobat Pro 2020. Here is a help article about it.https://www.adobe.com/devnet-docs/acrobatetk/tools/DigSigDC/appearances.html The help article does not mention anything about how to change the field labels. There is just a tickbox to turn some field labels on or off. I need to change the texts of the field labels (Digitally signed by:, DN:, Reason:, Location: , etc) I do not need any text formatting like bold, italic, etc,.I only need to change the texts. Just as an example, I need to change the "Digitally Signed by" into "Electronically Signed by". The help article doesn't describe or even mention how to do that. In Acrobat Pro 2020;Can I do it?How can I do it? Thank you all and kind regards,Hakan      

Bonjour,J’ai créé un commentaire verrouillé dans un document PDF, et celui-ci est quand même modifiable et déplaçable par une autre personne qui utiliserait un Mac. Comment faire pour ne pas que cela soit possible ?

We are deploying Acrobat DC in a VDI environment and would like to not have to have users log into Acrobat each time when they log into their desktop for the day. I have tried copying the Adobe folders from local and roaming but that doesn't apepar to work. Any ideas? Thanks

I am new to JavaScript. However, I've worked with fillable pdf forms. Can someone provide JavaScript code that will perform the following function within the form:The form user will make one choice from Classification Area (5 selections: Student Development; Interagency Collaboration; Student-Focused Planning; Program Structure; Family Involvement). Based on the selection from these areas, a Heading field will be auto-populated on page 2 of the form. Also, I need to allow for multiple line entries in several fields in various fields of this form that might mean that the information will need to extend and add pages as the user types in requested information.