Camera Raw

This post applies to Camera Raw and is the primary feedback thread for the Blemish Removal feature. Blemish Removal can be found in the Remove edit panel for Camera Raw. Blemish Removal helps automatically remove distracting skin blemishes, such as acne and other temporary imperfections, while allowing you to tune the appearance of permanent marks, such as freckles and moles. Once enabled, your image will be scanned for people, and any detected blemishes will be automatically removed. For refinement, you can adjust the result using the Amount and Fade sliders, choose which person the removal applies to, and restore any areas you'd prefer to keep. Batch removal is also supported; simply select the "Blemish" checkbox under "Remove" in the copy settings dialog. We would love to hear your feedback on Blemish Removal! Please give it a try and let us know what you think:How is it useful? How could it be more useful? What could we do to improve your experience? Josh Bury, Camera Raw Engineeri

This post applies to Camera Raw. Lightroom Classic and Lightroom Ecosystem feedback can be found here. Previous Early Access Feedback can be found here.   Generative Remove makes it easier to remove unwanted objects and distractions with a simple gesture, even on complex backgrounds. For more accurate results, be sure to include the object's shadow in your selection and/or expand its size.    Detect Objects uses AI to find the objects underneath a brushed area. The masked areas will now appear larger than the Early Access version of this feature. You can also circle objects for quicker selection now.    We have also updated the spot selection experience to make it easier to manage variations, switch the fill type, refine the selection area, or re-generate as needed.    Batch updating is also now supported for Generative Remove spots. As Generative AI analyzes portions of the image that have been cropped out, Camera Raw has the ability to tog

ACR is using all 24 GB of VRAM and does not appear to release it. Earlier, I was using an RTX 5070, so I assumed that 12 GB of VRAM might not be sufficient. However, I have now upgraded to an AMD RX 7900 XTX with 24 GB of VRAM, and I am still experiencing the same issue.Any masking or scaling operation in ACR immediately consumes almost all 24 GB of VRAM. The memory is released only after I completely close ACR.

In the latest version of Camera Raw, some keyboard shortcuts have changed. Previously, you could rotate an image simply by pressing L.Now, however, they’ve switched to the combinations Ctrl + ] and Ctrl + [.I can no longer rotate the image because, to type square brackets on my Italian keyboard layout, I have to press Alt + è or Alt + +. Alternatively, Ctrl + Alt + è or Ctrl + Alt + +. The rotation doesn’t respond to the command. What should I do? It seems it’s also impossible to change the Camera Raw shortcuts.  thanks

Hello, I have hundreds of headshots to edit in Photoshop. I really like the Camera Raw Remove Blemishes feature and want to make an Action out of it. The problem is that when create an action using “photo A” and then try to use the action on another photo “photo B”, the mask of blemishes are copied from Photo A and it just puts blemishes from Photo A onto Photo B. So, instead of the Remove Blemishes Action re-processing the Blemish filter, it just applies the processing that it created when I made the action. I love the actions and have made many for all kinds of purposes that help me move through my edits faster. I can’t seem to figure this one out.If you need clarification I can try and do that.Thanks,Will

camera raw geometry bug

When opening RAW in ACR and using Crop (C) tool from left or right of the image it actually starts moving the GUI rather than cropping the image, not sure what version this has been changed, but before i never had this issue, please make GUI have lock option so when cropping images it would never try to resize GUII understand there is way to aim and select the right resize tool but margin for aim is so little and its waste of time, GUI should be set up once for most people don’t need to constantly be able to resize the side bars of ACR GUI

Camera Raw 18.7: Select People fails because ML model is not loaded / People model not provisionedI'm having a persistent problem with Select People in Adobe Camera Raw 18.7.System Adobe Camera Raw 18.7 (18.7x2743) Photoshop 27.10.0 Windows 11 NVIDIA GeForce RTX 3080 Laptop GPU The symptom is that Masking > People reports:“Unable to select people in this photo.”This occurs consistently with photographs containing clearly visible people. Select Subject, however, now works correctly.I originally also had problems with Adobe AI models failing to download. Interestingly, connecting through a VPN (UK connection routed via the Netherlands) allowed the Select Subject models to download and Select Subject then started working.I have since completely rebuilt the Camera Raw ModelZoo by renaming:%APPDATA%\Adobe\CameraRaw\ModelZooand allowing Camera Raw to create a clean ModelZoo while connected through the VPN.The fresh ModelZoo successfully downloaded the Select Subject components, incl

Hello everyone, as a user of lovely fuji x100v I often use digital crop function that makes from 35mm a 50mm or 75mm lens.. this function crops the jpegs but in raw it is stored just as metadata.. my problem is that when these raw files are opened in bridge it doesnt read the crop info and shows it as full image.. also when converting via adobe dng converter from  raf to dng it doesnt detect the crop so my composition is off .. So I was hoping adobe could fix this because the metadata is there and I could have a cropped image already with option going back ( like a preset already applied) .. there is one unofficial plugin for ligtroom and one other manufacturer implemented this in his dng converter but it is apllying also demosaic or how is it called and the dng is 30% bigger in size so a no go for me.. My simple workflow is bridge + camera raw.. Also it would be cool if there was option to save a manually cropped edit as preset because camera raw ignores manual cro

Announcing a new feature now in Adobe Camera Raw (17.2) – Removal of Distracting PeopleUnder the Remove dialog, under Distraction Removal, we have added an item called “People”.   This feature supports faster and easier detection and removal of distracting people in an image. It is offered as a Tech Preview in the Adobe Camera Raw Plugin-only and is available now. Please try it out and let us know what works well, what doesn’t work well, and anything that might improve the experience.   Thank you! Peter Baust - Dir, Product Management   Posted by Rikk Flohr  

one PC two OS, two different PS ver, and same results!ACR from ver 18.5 18.6 18.7 stop working! it just not open...install today new 18.7 nothing change, uninstall and back on 18.4.1 the last ver that works.win10 PS2019+ACR18.7win11 PS2027+ACR18.7  p.s. I checked whether this was a compatibility issue or something related to new library or runtime files, but I found that it isn’t. The problem is with the Camera Raw.8bi file itself. Simply replacing it with a newer version causes the ACR to stop launching, the same is true in reverse: if I take a freshly installed newer version and replace only its Camera Raw.8bi file from 18.14.1, while leaving all the other libraries untouched keeping the newer versions, ACR launches again and works normally. 

 The updates for the versions I mentioned in the title don't work. Camera Raw keeps claiming my RTX 3070 GPU isn't supported. So, I can't use it. Only version 18.4.0.0 works.Here are screenshots of the messages I receive with the latest versions. And here with version 18.6.0.0Apart from Photoshop itself, which does support my GPU:Therefore, I cannot take advantage of the latest Camera RAW features. This is unacceptable.I already submitted a bug report for versions 18.4.1 to 18.5, but without success. You haven't fixed the problem in this version.Here are the logs for version 18.6.0.0As well as those of the version that works for comparison.I also upload my dxdiag file for analysis.I even got another NVIDIA GeForce Studio driver update today, version 616.56. But it didn't fix the Camera RAW issue. So I'm still stuck on the working version 18.4. It's really frustrating 😤 knowing that I'm paying for the software.

I am seeing a significant performance regression with AI Denoise in Camera Raw 18.7 on a 2023 Mac Studio with an Apple M2 Ultra.SystemMac Studio (2023) Apple M2 Ultra, 24-core CPU 128 GB unified memory macOS 27.0.1 Camera Raw 18.7 Photoshop 2026 Sony A1 II RAW files, approximately 49.8 MP (8640 × 5760)ProblemAI Denoise on comparable Sony A1 II RAW files previously completed in under 10 seconds on this same Mac. It now typically takes approximately 15–20 seconds.I reproduced the problem by opening a Sony A1 II ARW directly in Photoshop/Camera Raw, so Lightroom Classic, its catalog, previews, and the location of the Lightroom photo library are not involved.During a recent Camera Raw Denoise test, Camera Raw estimated approximately 20 seconds. While Denoise was running, Activity Monitor showed the Mac remaining approximately 86–94% CPU idle. GPU History also showed relatively low GPU activity rather than sustained heavy utilization.Camera Raw Preferences > Performance identifies the Ap

Pressing G used to add a linear gradient mask. Now it brings up the new Grid layout. J used to apply the radial mask. Now it does nothing. What’s going on with the KBSCs? I’m not sure if there are others that have changed. The brush took, still works with K.

This is feedback rather than a question.  I have just returned from visiting a site of ancient buddhist caves in China. The delightful Buddhist statues are behind wire mesh grids for protection.  This makes photography virtually impossible. However, i took a few photos and reflection removal worked to remove the wire grid!   

J'ai un problème. Toutes les versions depuis Camera RAW 18.4.1 à la dernière échoue de fonctionner sur ma machine. J'ai une RTX 3070 Ventus, Je suis sur Windows 10 22h2 entièrement à jour. J'ai 32 Go de Ram. J'ai la dernière mise à jour du driver NVIDIA. C'est à dire la 610.88. Mais à partir de la 18.4.1 de Camera RAW, il ne reconnait plus mon GPU. Impossible de l'ouvrir dans Photoshop. Un message indiquant que "Camera Raw nécessite l'accélération du processeur graphique pour retoucher les photos". Donc pour lui, c'est comme ci je n'avais pas de GPU. Dans les paramètres de Photoshop pour aller dans les propriétés de Camera Raw, au niveau performance, je vois ce message "L'accélération graphique Camera Raw n'est pas prise en charge par votre système". J'ai déjà cliqué sur "Réinitialiser la prise en charge GPU", "Purger la mémoire cache". Redémarrer Photoshop. Mais sans résultat positif. Pourtant Photoshop lui-même détecte bien mon GPU et il est bien utilisé. Pour le moment, je suis obli