Using the Community

Possibly related to this update, i.e. this started happening when I first logged in  yesterday morning (10th March), but whenever I login in order to post, everything switches to Spanish from English (i.e. everything is normal until I have to login to post). Mr Google Translate does a fair job and translates the main discussions page, but when I then open an individual thread all the UI elements switch to Spanish (as you can see from this screenshot taken while typing this response).  All email notifications I receive are also now in Spanish.     This happens in all the forums that I tend to monitor (LrC, Lightroom, LrMobile), it happens with different browsers and it happens on different computers. I assume somehow a language preference has been set for my profile, but I cannot see it in order to reset it. I'd be very grateful if someone could investigate and fix it. Thanks. [ branched from 3/9/2021 Community Release Notes to Using the Community forum by moderato

I am just trying to access a thread (https://forums.adobe.com/thread/2217630) from the "old" Adobe forum, which I found via google search. But if I click on this link, Adobe automatically redirects me to their landing page  https://community.adobe.com/How can I access these old forum threads? This is only an example, its the same problem with all other old threads which have the url "forums.adobe.com/thread/xxxxxx". And with the search function in the adobe community I neither can find the thread.Thanks a lot for answers!    

I need the link to https://blog.adobe.com/accessibility. It gives me an error when I try to access the page. Any help would be great.

Recently, I changed my email address. I then started receiving every post to the acrobat forum.  I went to my notifications page, and somehow all had been turned on (I didn't).  I unchecked all except one (conversations I start), but they still roll in. Now I'm getting multiple emails telling me I can't get in without a verification code.  Well, here I am, and no need for a code. How do I turn off the bubble machine?

WIE KANN ICH MEINEN COMMUNITY BILDSCHIRMNAMEN ÄNDERN, DA ER MISSBRAUCHT WIRD?

I wondered if the warning mechanisms had been restored or were about to be restored???? To follow on the forum is complicated, I can't get used to it, and moreover with the context at the moment, where more and more virtualization is taking place, the mailboxes remain a precious centralization tool. please tell me that the mail tracing is fixed, and functional again 😉

Hi All, I am trying to embed youtube videos using Embed component. While selecting youtube from embeddable tab, I can see video id but width and height option is not visible. I want to set width and height from the dialogue as can be seen in Adobe documentation - https://experienceleague.adobe.com/docs/experience-manager-core-components/using/components/embed.html?lang=en#html. As per the document, enable option should be activated from design dialog, but in my design dialog, I can see only option to enable mute and other options are not visible. Can anyone tell me how to fix this issue? Thanks in Advance. Regards,Amit

I added an animation to my object in Adobe Aero. I wanted to test out the QR code so I scanned it on a new device and I placed my AR object on a desk. I have the option to scale the object and move it around but when I tap on it, it does not perform the animation. It seems as if it's in an editing mode and I'm not sure how I can place the image in the space and tap on it to play the animation. Any help would be appreciated, thanks!

Hi @adobe-admin, others, I commented a message on the wrong post. Can you please delete my comment from the following post: https://community.adobe.com/t5/framemaker/delete-all-markers-starting-with-quot-part-no-quot-and-type-quot-index-quot/m-p/11193070?page=1#M66331

End of workday - tired and looking for answers.  I misspelled two words in the title of my topic.  Oh MY!! Acrobat From Flitch with calculations   It should have read Acrobat Form Glitch with calculations     Is there a way to edit this to the correct spelling? Thank you.   Fixed... Moderator

I keep getting this notification when trying to import images from my Canon 90D.  I just imported yesterday so not sure why its not working today? Please advise. 

Hi, I'm trying to post a reply in a forum, but there is an alert stating "Your post has been changed because invalid HTML was found in the message body. The invalid HTML has been removed. Please review the message and submit the message when you are satisfied." I clicked 'post' again but nothing happens. Please help!

A problem that many people have reported since 2020 is that the "More" button which allows you to edit a post after making it, has devolved into an empty box.     This used to work as of a couple of years ago.   If we need to fix a typo or add detail to a post, how are we supposed to do it now?   And where are we supposed to post questions like this?

Hi all, The Adobe Support Community has released several enhancements and bug fixes today on Tuesday, Feb. 16th, 2021. With this release, users can now seamlessly stay logged-in or logged-out between the Community and other Adobe surfaces. For now, this solution has been deployed to 5% of users. Provided no impact to site performance, we will increase the number of users this solution is deployed to over time until we reach 100%.   Enhancements Seamless Login/Logout States Users can now seamlessly login between the Community and other Adobe surfaces. The solution is currently deployed to 5% of total users to observe any caused performance issues. The number of users will be gradually increased. Standardized Search Bar Strings Search strings in the search bar will appear as defined below: Homepage: “Search all communities” Product board pages: “Search this community” Conversation pages: “Search this community” Private messages: “Search all communities

Is it possible to merge an old Adobe CC forum account with my new account (mainly for use on this forum)? Long story short: I worked at an agency for many years, that had us all on a company Adobe CC plan, so I posted in this forum for many years using that Adobe account (using my agency email account). Then, when I left that company, I signed up for my own Adobe CC account (with my personal email), and have recently been using that new account here in the forums (I've only posted a few times with my new account).  Is it possible to transfer all of my forum data from my old CC account to my new CC account, or somehow connect the 2 accounts for forum use? It's a bummer that I'm starting from scratch with my new CC account on the forums, since I have so many posts under my old account. Or would it be as simple as changing the "primary" email for my old account, to match my new CC email? Note that I no longer have access to the "primary" email for my old CC account, th

Necesito ayuda.Alguien me puede decir cómo lo puedo hacer para que, al crear un formulario, el contenido de las celdas no se duplique a las celdas siguientes?

Hi Everyone,   Adobe Support Community has released several major enhancements and bug fixes today. In this release, we updated the nested reply view on conversation page to eliminate thread limits set originally on each level of reply, as well as adding quoting capability in the rich text editor for replies. Users will also have the ability to attach files on the reply level. For community operation, we have also removed the reference for flash player form the related community list and retired Aero community board.   Enhancements Nested reply view Default at 25 posts per page regardless of leveling Ability to change number of posts shown per page via Account Settings -> Preferences (3-201 threads) Quoting capability Quote the entire message on all levels of replies Ability to edit/delete part of the quoted texts in rich text editor Quotes will be displayed in dark grey italic styling @user mention the author of the original quote Ability to attach files in all

How do I remove myself from this community support page? Adobe is flooding my email inbox with every single post and comment being made by everybody. I called Adobe 1-800-585-0774 and the person hung up on me when I stated what i wanted to do. I called Adobe 1-800833-6687 and the person talked in circles because they didn't know how to do it. I will use those numbers in the future for Adobe product technical fails instead of this support page. Ironically, I have to get an email about this which I will probably never see because I am deleting pages of adobe emails daily from my inbox. I did go to an account settings page but the attempted changes to stop emails keeps getting reversed by adobe to receiving emails. What I'd really like to do is remove myself totally from this online support nonsense. Do I need to end my subscription and then start a new subscription with a new email address? 

It used to be a case of going on to  your own profile and being able to filter for posts you started but now that seems like it's impossible? I have to scroll through all my entire comments to find some old helpful posts I had years ago Is there a way to do it easier than this? this seems like a weird way of changing things.

I have a file From and email that I saved to my drive. I am trying to open and it keeps asking for a password. I tried all my passwords but none work! Why is it asking? What do I do?

I got kicked out of my account and after finally logining in back through my Gmail, I lost all my recent notes. Also, why is logining in so hard now? I had to restart my whole Ipad with countless error messages. 

I want to post a message but I'm told there is HTML content in my message. There isn't.

I found a post from 2014 but it seems to refer to a version of the forum software that is not this one. I can't figure out how to quote a previous post. thanks

I made a post on Jan 26, 2021 in the PS community (Catalina slow .psd), but I do not see my posting when I browse through the listings on the 26th. Did this 3 times. If I... Search Entire Community by my user community name, the posting does not appear. If I seach for keywords as entered into the Subject Header, the post appears with some 20 views? When I go to my user profile, I can find the posting. So others can see the post but I am unable to do so? Where am I going wrong on this? Thanks.