After Effects

Never had any issues running AE before. Suddenly experiencing 10-15 second delay in every action I try to take. What's up with that!?!?! 

I know I must be doing something wrong and I just can't work out what. The transpancy exports just fine but the glow ends up grey and washed out on lighter backgrounds, unless it's on pure black and you can see the colour (but it's still washed out). I've managed to export the original file via After Effects as a MOV file with the settings in the screenshot. I was originally having issues exporting the glow with the right colour but these settings ensured it kept the right colour glow. However when I export to WebM via Media Encoder my "glow" ends up grey and washed out, rather than the colour matching the lights. I've tried so many different settings and I just don't know what to do. I might have to try not exporting the Glow (it's a solid colour circle with a Gaussian blur effect, 60% opacity and Overlay)

Hello AE community! I am an amateur AE user so please bear with me. - I am using Rubberhose 3 plugin with an Illustrator Artwork.- I would like to rig the artwork itself and not create a new hose because i like the artwork and i don't think i will be able to mimic the same using a hose from scratch.- I am adding puppet pins to the Illustrator Layer in AE. Here is the original Artwork (a tail) - Here is how it looks after the Puppet Position Pins i add in AE- When i create a new RubberPin (Base : Tip) for the given layer it ends up being completely distorted as following  - If i replace the Puppet Position Pins with Puppet Starch Pins (except for very the first and the very last pin) and then add RubberPin then the artwork remains normal BUT this makes the puppet too rigid to wave using RubberHose styling such as Wavy Gravy.- I have tried playing with the lenght of the hose, roundness etc but I cannot make the Rig work with RubberPin Hose and AE Puppet Position Pins.

I'm having a recurring issue where I open a particular AE file, and either the Composition Panel is immediately white, or after a few seconds it turns white, and then I can no longer scrub along the timeline and the program crashes within a few seconds. Sometimes my screen will go completely black for a second upon opening, and then when the screen comes back, the Composition Panel will be white.  It seems to be an issue with one particular project file. While I've been using AE on this computer for a few months now, this project file is the first one where I've really been using it intensely (aka, dozens & dozens of pre-comps). This also happened shortly after I started a LinkedIn Learning AE course, which involved downloading a number of AE files from old versions of AE. Not sure if that is at all related. The issue seemed to be fixed a month or so ago and I worked in that project for a few weeks without issue, but I just now imported the comp into a premiere proje

Hello Community,Please see my screenshot below, I can't figure out how the position property in a group transform is derived.  I understand the relationship between the composition coords and the layer coords re. anchor points and position; but the group position property is confusing me; I can't relate its coords to the layer or the comp.  I've searched for info but to no avail.  Please adivse or point me in the right direction.  Thanks in advance for your help!  

In general, I did the animation of the shape, and now I need to add this effect as in the video https://youtu.be/XWw6sxAQYDY?feature=shared , I tried to add blur and glow, but they went beyond the boundaries of shape 1 (I created two shapes: shape 1 and shape 2, shape 1 is the main animation and shape 2 is trail, and blur and glow 2 trail shapes went beyond the boundaries of 1 shape). Can you tell me how to make sure that they do not go beyond the borders? 

Hi, I'm new to C4D lite. I built a simple text animation in the software, when I brought it into AE, the live link was disabled, and I couldn't edit nor even scale the imported file.I went through some tutorials and discussions online, but there's no " enable live link" option in my C4D preferences. I don't know what to do. I opened a new Maxon C4D file and created a cube to test it out, this time AE didn't even show the C4D panel in Effect Control.I'm sooooooo confused right now and hopefully, someone can help me. Thanks soooooo much!!!!

I'm working on geolayers3 content in which I have to import 3D Objects like "airplane, cars etc ". I tried .glb .gltf .obj but whenever i import them this happens as showing in SS. Please anyone help me to solve this issue 😞 

command option shift G isnt scaling the picture to full frame. i can still see like a micro hair of alpha channel in the background. see attached screenshot. Mac os sequoia 15.1.1, after effects version 25.1.0 (build 68), its been doing this on a few templates now

i dont know what happend,yesterday every thing was working great and file was working smothly.today when i opened the file again this happend to every composition is seletced but in the tab below nothing is select and file is very slow now i cant find any thing about this 

Hello community! I'm working on a 3D comp with a bunch of black tiles scattered along the XYZ axis, which are supposed to get whiter the farther away they are from a camera that moves along the Z axis. The way I want to achieve this is with some sort of white 3D cube parented to the camera which has 0% opacity at Z position 0, and progressively reaches 100% opacity at its maximum Z position (let's say 5000, AKA the opposite end of the cube). Is there any way to do this? Thanks a lot in advance! I've attached an image that better showcases what I want to achieve for the cube so that you can get a better understanding of what I mean, & a handmade reference of the final result.

If a mask is applied to a layer, and then scale keyframes are added to that layer, the ability to use the Selection Tool to click and drag the position of that layer within the Composition Preview Window breaks. Strangely, the effect of this bug is also dependent upon the position of the layer on the timeline. The bug's severity increases the farther to the right the layer is positioned in the timeline. So, for example, if the layer begins at the start of the timeline, the click-drag on the layer in the Composition Preview Window works as intended. The farther you move the layer to the right in the timeline, the smaller the active clickable area is in the Composition Preview Window, and instead of dragging the layer when you click on it, it drags the mask instead. I've attached a video showing the bug in action. Up to :33 seconds, you see the expected behavior. After :33, you can see that the Selection Tool can no longer drag the layer and instead drags the mask. AE 25.1

How to make this on UI script?  

 

I am trying to use an expression to set a text layer to the name of the comp,  but the text is somehow getting reversed.    I am using this expression for the source text :  thisComp.name  - but when it appears in the comp,  some of the characters are swapped around.   See attatched where the yellow text is the dynamic live text generated from the white comp name below. But notice how the yellow text has swapped the "010" and "0500".  Maddening.... 

Hello everyone,I’m new to After Effects and I’m encountering an issue with the vectorization of texts and tools. Just to clarify, I’m only referring to native After Effects tools and texts (not projects imported from Illustrator or Photoshop).Here’s the situation: only solids, rectangles, and rounded rectangles appear to be vectorized. Texts, however, are not. The Continuously Rasterize button is grayed out, and I’ve set the resolution to Full. I’m also using the latest version (25.1) and haven’t changed any default settings.Could you please let me know if I’m missing something or if there’s a specific step I should follow to resolve this issue?Thank you in advance for your help, and have a wonderful day! 😊

Hello everyone, I’m creating this topic about an issue that has been discussed many times before: preserving colors for videos shot on an iPhone in HDR (15 Pro Max, in this case).I’ve watched every YouTube video imaginable: some are outdated, while others offer slight improvements but don’t achieve perfection. First point: all the tutorials I found were for Premiere Pro, not After Effects. I understand that most professional editors will use Premiere Pro instead of After Effects, but as a motion designer, I strongly prefer the latter. So, let’s get straight to the point: attached is a sample footage shot last week https://we.tl/t-ex5ol0a1vBHere’s how the colors look in the Photos app on my Mac/iPhone, or when I play the video in Preview or QuickTime (although they appear darker in the screenshot).  Now, here’s how they look when I import the video into After Effects without any adjustments. The colors are completely washed out.  Next, if I try to

I'm having a minor interface inconvenience. I don't know if it's me or After Effects... I am working on multiple comps, and switch between them via the Timeline Panel. The problem is that there are certain Comps/Timelines where the search box panel in the timeline is always activated when I switch to it. Meaning I might quickly switch timelines, hit the keyboard shortcut for a ram preview - but nothing happens because all I've done is type 0 into the search field. I have to click away, then hit 0 again to get my preview. I might then work on other comps with no problem, but the search panel on this particular timeline will always be pre-selected when I return to it. It's a minor frustration. Anyone know what's going on?

Problem with Custom View not going with Playback headhttps://www.youtube.com/watch?v=MQpwXWRZmyw

It's hard to rotate where you want in AE? It needs to feel more like Blender and such??I'm trying to just see if it's aligned with the green but it's extremely difficult.I'm on a 5950X with AMD RX 7600 on Windows 11 x64, NVMe, 64GB RAM, etc. on the latest drivers. https://www.youtube.com/watch?v=lO8D6kj1cS8

Hello, I am using adobe after effects 2025 and I want to be able to move this raindrop over to the left but everytime I do, it wont attach the straight path and the other drops with it. Once i select everything and move it over, only the path of the big raindrop moves but it moves in a diagonal. I am not even sure if this makes sense as I am new to after effects. I have attached images below.

Hello!I'm having trouble with the Corner Distor effect. I've had similar issues with warp & distort effects in the past but just work around them. Now I'm not sure how to and think it would probably more efficient to learn what the actual issue is and fix it.I used Corner Distort to make a Composition (two animated stickfigures, comp named "Whiteboard Drawing Small" ) fit the whiteboard. It works in the original composition (Composition named "Office Client POV" and even in a Compositon further up when in original size, but completly moves out of place when I scale the composition. Why does it do this? How can I lock the distorted composition so that it is scaled just like the composition it's nestled in? Thanks in advance!