Audition

Hi guys, For some reason, I cannot save or export my multitrack session, all options are greyed out. I can, however, go to Multitrack> Mixdown session to new file to export it, but I obviously would like to save my sesx file. My tracks are all set to master. When I was editing, my audio hardware preferences were set to my headphones, which I have since disconnected and set back to my laptops hardware for both output and input - I'm wondering has this anything to do with it? Ive set it back and connected my headphones again, but still no joy. I'm also running 13.0.4 software. Any help would be appreciated, thanks! 

After upgrading to Audition 25.3 from 25.2, the application will no longer launch, and it crashes instantly. I had to uninstall and roll back to 25.2. I tried to upgrade twice, and immediately after the new installation, it failed to launch. Anyone else having this issue? On a Windows 11 Business 24H2 Lenovo with 128 GB RAM, 2.40 GHz Intel Core. All other Adobe products work fine, and once I roll back to Audition 25.2, the crashing issue disappears.I tried to uninstall and do a fresh install. This did not change the problem. Doing a straight update in Creative Cloud does not work, either.  

I bought my 3.0 sometime between 2003-2008.  I have the original disk.  I have used this program forever.  Recently my computer died.  I bought a new one and installed from the disk.  I used the Serial nUmber, but now it wants an activation code.  Am I screwed?

Hi I imported an .xml project in audition and started working at the project. I realized that some clips should be in stereo but its sounds in mono. So I created all news stereo track and replaced the old ones (that were mono by default), but this didn't solved the problem.Now if from the multitrack project I doulbe click on the clip (the one that sounds mono but I repat it's a real stereo one proof is if I open the file with an external audio player) I see this:as you can see Audition recognise it's stereo, the problem is that one channel is grayed out by default for the stereo clips I have in my project.how to solve this problem please?I'm on a project for a indy documentary and I'm working by a month it's very important for me to fix this issue.thx so much,Dan

Hi. I have two audio tracks, let's say audio track a and audio track b where track a has the length Ta and track b has the length Tb. Track a is composed with segments like Sa1Ta1 + Da2Ta2 + Sa3Ta3 + Da4Ta4… Track b is composed with segments like Sb1Tb1 + Db2Tb2 + Sb3Tb3 + Db4Tb4… Where segment Sa1Ta1 has the duration Ta1, segment Sb1Tb1 has the duration Tb1, segment Da2Ta2 has the duration Ta2… so on. Segment Sa1Ta1 is similar in content to people's hearing with segment Sb1Tb1 but the length of Ta1 is not equal to Tb1, in other word the 2 segments is different in speed. Segment Da2Ta2 is different in content with segment Db2Tb2 and the duration Ta2 is different with Tb2 too. (Abbreviation: S for similar, D for different, T for time, a for track a and b for track b) And so on. Now I want to compare and split the 2 audio tracks into segments. Let's say Sa1Ta1, Da2Ta2, Sa3Ta3… for track a and Sb1Tb1, Db2Tb2, Sb3Tb3… for track b. After tha

I am having issues getting audio to record in Audition with my new BlueYeti (USB) mic. I know that the mic works as I can see the levels moving but it’svery faint. Is there a setting in Audition that I need to be aware of? I havetried in both the multi-track and in the wave form. I have gone to the audiopreferences and the new mic is showing up and is in the record options box. I’m working off a laptop running windows 7. I have even uninstalled Audition and loaded it again.

I'm looking to split each channel out of my Pioneer XZ into an Adobe Audition Multi Track session so it's easier to edit each track from a DJ mix using an iRig Stream..... But I can seem to get it to work. I use to be able to do this out of an older Pioneer mixer into Abelton Live. I've trawed through youtube and can't find anything to solve this. Please help.

I'm new to audition.  I want to use the matcheq feature in this plugin.  My reference is in track 2 and the source to change in track 1.  I get from various yt videos that I probably need to set the side chain for track 1 to track 2... I believe I need to set the sidechain to track 2.  I looked and dont see documentation on this simple step.  I believe I hit the sends button and then slick S1:None -> Side Chain -- but the option is grayed out...?Help! 

Hi there, I am using Audition v25.3.0.71 and Mac 14.2.1. In earlier versions, I was able to use Export --> Session… to create a copy of my multi-track session and with "Save copies of associated files" checked, I was able to copy just the used clips into a new "copied" folder. I liked this a lot 'cause it got rid of any extraneous files that might have been in the "Imported" folder.Ever since v25 hit, any attempt to use this option results in no files being saved at all in the destination folder. No copy of the session. No copied folders. I know I can do something similar with "Save As," but it appears that not all files get saved into the resulting folder, so I have to manually add the missing files. I'm also not sure if this gets rid of the extraneous files. In any case, has this happened to anyone else and does anyone have any suggestions? Thank you.

The name of almost every audio file I export starts with the same two words. Is there a way to get Audition to auto-fill the file name by default with those two words so I can just add on to the end of the file name? It would save me from having to type the same two words every time I export. Thank you!

I use Audition almost daily, and recently on a new PC, I have been having issues- I cannot launch it without reinstalling it after using it for a while, forcing me to keep having to reinstall it, to use it for a while, then when I close and reopen it another day, it remains stuck at Initialization (dvascripting). Any help would be appreciated. Thank you!  

I have the sidechain compression set up on a 9 track audio project. One track is the voiceover and it controls the compression FX on the other 8 channels. When I play the audio in Audition, it works flawlessly. When I try to export the audio, the compression is not present. The audio sounds just like the pre-FX audio. Seems like a bug to me. Any ideas would be appreciated.

Hey everyone, I’m on a project in Premiere Pro with vocals and background music. To create a ducking effect where the background music lowers under the vocals, I’m using a sidechain-capable VST plugin to have more flexibiltiy over the effect compared to the built-in ducking feature from Premiere. Since Premiere doesn’t support sidechaining, I linked the project to Audition. Here’s the setup in Audition: The plugin is added to the background music track. The plugin’s sidechain input is enabled. The vocal track is sent as the sidechain trigger. Everything works perfectly during playback in Audition, and if I export the full mix, the sidechain effect is included, no problems there. The issue comes when exporting individual tracks.If I export just the music track (which has the sidechain effect applied), the sidechain effect is completely missing. Other effects like saturation or EQ are included just fine, but anything that depends on a sidechain trigger doesn’t render in individual expo

I am making videos which need to be sped up by about 10%. I tried the effect in premier, but the audio sounds bad, so I use Audition to do it. I set a new duration in audition, then go back to premiere, and then use the Premiere function to apply the same change in duration to the video clip. You would think that if I enter exactly the same target duration for audio in Audition and for video in premiere, the result should be that video and audio should be exacty the same length, but they aren't! I always get a discrepancy, sometimes by just a couple of frames, and sometimes by as much as half a second!  How can I use Audition for speeding up the audio and then bring the video to the same length in premiere without the two getting out og syn? Please help, this affects every single project I work on.  

audition 25 on macbook pro all updated. when simple audio file is inputed, the edit tools are grayed out and i cant use them. subscription all valid-audition works fine on other larger mac

I have a long (1hr 40mins) project in Premiere Pro that I am trying to edit in Audition, as normal. However, about 50% of the way through the Audition 'opening project' dialogue, I get the following error: /Volumes/****.prprojError: File not supported by any currently registered plug-ins. That is the entirety of information given by the error message and then Audition opens, but with no data imported from Premiere. I have been using this workflow ever since Adobe launched Mercury Transmit and have never seen anything like this before. My system is fully updated, with the latest Adobe and Apple software versions:Premiere 25.4.1 (build 3)Audition 25.3.0.71MBP M4 Max, 128GB, 4TB SSDOSX 15.6.1 Next step will be uninstalling and re-installing Audition, but any other ideas will be very well received!

Hello i have an audiobooks website (https://audiobookslab.com), where i would love to use the services of adobe audition, I have already bought the the app, but what my basic question is that can i use this tool (adobe audition) online on my website

I'm currently editing a piece with two audio tracks – one for narration and one for interviews. The two tracks alternate, and each contains lots of small clips.Now, for the second time, I'm running into an issue where some clips suddenly go silent – there's just no audio. I suspect it might have something to do with repeatedly splitting and reconnecting clips. When I go back into an already edited clip to make further cuts (like removing a few seconds), parts from the following clip sometimes shift forward unexpectedly – even though they’re supposed to come later in the timeline.My questions:What could be causing this?Is there a best practice to avoid this kind of issue?How do you handle editing projects with many small audio clips without things getting messed up like this?Thanks a lot for your help!

Hi to all ! A new bug started yesterday in Adobe Audition 25.3.0.71, installed on PC with Windows 11 When I try to use anything needing to display a dialog box, this box opens totally blank... I tried to reset Audition to factory settings, then uninstalled and reinstalled it... Nothing works. Attached is a screenshot of an exemple of this very annoying bug. Thanks in advance for any idea to solve this !

Hi everyone, I would really appreciate any help with a matter. I'm editing a project in Audition and I was just command S-ing when I noticed it didn't lead to any saving. Then I checked the file bar and all three save buttons were greyed out. Then tried to export to save my progress and the export multitrack is greyed out. I tried finding similar problems but all the results didn't solve my problem. Most were solved by the output not being in Mix but all of my outputs are in Mix. The closest problem I saw mentioned was that I had two sesx files with the same name, but I have no idea if that is the problem or how to change the name, as I tried changing the name of the original file, but it didn't change it in Audition. I'm linking two images of my project and the greyed out buttons. Any and all help would be amazing! Thank you. 

I looked at the internet and tried a couple of proposed solutions but nothing worked for me. The VST3 boxes open for a split second with their appropriate size but get overwritten by Audition with a window format from the biggest VST plugin I have. Where can I change that?In which user\appdata\roaming\adobe\Audition \25.0  *.XML setting can I change that?I guess it will be Application Settings but which line should get changed? Thanks for reading and hopefully answering,Best René

I can no longer record off of the internet or other programs using Adobe Audition. This use to automatically work out of the box. Recording from the microphone still works. I recording using a DAW (Rodecaster board).  I am using Windows 11. I have tried the following: Made changes in Adobe Audtion to the recording deviceDisabled other recording devices in Windows 11 and made the DAW recording device (Rodecaster board the main device)Checked my Google and IE and Firefox browers to allow sound from Rodecaster Device in privacy settingsRestarted my computer several timesThis is frustrating. I have spent one week trying to get this work and nothing works.  Please help.

When editing in the Waveform window, once I delete the content of an audio file - the waveform itself is still visually showing in the edit window. But the actual audio content is no longer there. It will not erase visually when I click delete (or CTRL-X). The only way to remove the visual representation of the waveform is to hit record again, which then returns the edit window to black. This has only just started happening since the last update.

Occasional pops in recording. Scarlett 2i2 Gen 3. Multiple mics tried. Still get pops that look like this.  Tried different sample rates, different buffer sizes. Switched from ASIO to MME. Still get them occasional. I tried on my laptop and that seemed cleaned so it appears to be something in my desktop setup, not the Scarlett. Any though on cleaning it up?