Audition

Greetings,Hopefully, I'm just being thick and overlooking the obvious, but I can't find a way to save appended tracks individually. Here's a typical scenario, I deal with live concerts and there are instances where, say, I need to swap the channels for every track of a show. I open the first track, append the remaining tracks, so I have the entire show as one .wav. I swap the tracks and now want to save the appended tracks(that have had the channels swapped) back as individual tracks again. Seems simple enough. but I can't seem to figure it out. what am I missing? Regards,Scott

I rearragned a few spliced clips in one track, and now those clips have a lower volume that cannot be changed. The volume envelope line is completely stuck; I can neither move it nor add control points to it on the rearranged clips. Is there any way to regain control of the volume on those clips?       

Hello,I have two different versions of Adobe Audtion installed on my computer by Adobe Creative Cloud. Each installation takes up 1 Gig of space. There are two versions 12.2.15 and 13.0. Can I uninstall the older version. Each version has two installation folders and two icons in the start menu. I would like to reclaim the space one of these versions is taking up. My subscription is through Adobe Enterprise as I work for a university and I am allowed to install on my home computer as I also work from home. Please let me know what I should do with one of these versions.Thank you.

Who thinks might know how to share a podcast but with a private link?

having trouble with version of audition CC2019 12.1.  I produce radio programs, and there are several files I use repeatedly within many programs.  lately, one certain file that I've used for at least two years has been crashing audition multitrack.  I drag the file into multitrack and boom - session crashes.  sometime the session is recoverable.  tonight two hours work disappeared because it couldn't recover the session.  I tried creating new copies of the file, but it just kept crashing after being dragged in. what would cause this?  

Which studio monitors are best in these three m audio bx8, Yamaha HS8 or Krk studio monitors

Hi. I'd appreciate some help in resolving this issue. I start recording, then I it stops in the middle of recording and I get this message: Selected audio device has no input channels available. I'd appreciate your help. Audition CS6. Windows 7. Thanks!Eric 

I'm using AU CC 2018.  I begin each project with a 50 minute master of raw dialogue.  I place the raw master on track 1, save the project with an appropriate name, and begin cutting.  First phase of project is a 22 minute clean version of the original.  We typicaly get two episodes from each 50 min "master" and they are uploaded for broadcast.  Here's the problem: Weeks later, an instruction comes from the producer,  with certain lines or words to be omited from the oroginal raw master, so they won't appear in the 33 min episodes.  So I call up the oroginal raw master and see that it obviously begins at 00:00:000.  Now I can move along the timeline and find the offending words I've been tasked to strike.  Obviously I can't destructively cut the oroginal, so I now open one of the edited episodes I think might contain the edit points.  Now of course the Audition timeline tells me the episode has begun at zero and I move to some point

I am attaching the first 30 seconds of a podcast that I am editing for reference. I have no idea what happened to the first audio file to make it sound completely different than the other two. It sounds completely fine and normal with headphones but sounds way off when I'm listening through the computer speakers. But, only the one file is off.  Does anyone know what effects I can put on it to make it sound closer to the other two?  

Hi, guys. Sorry if this topic has already been discussed, I did a search but didn't find anything, so here is my question. After upgarding to the latest Audition 2020 the Noise Reduction process seems like doing almost nothing, or was dialed back significantly. To illustrate of what I mean I did a short video of what I think is wrong: https://www.dropbox.com/s/2pqbzv310rk1quk/Recording80.mp4?dl=0 In short, before the Noise Reduction process after capturing the noise sample and applying the process to it was eliminating the noise completely, while now the same thing do almost nothing - a VERY LITTLE reduction. Would like to know if it's by design, or the filter is broken in a new version or maybe I am doing something wrong. Would be cool if some Adobe Engineer or powerful user will clarify this situation. Thanks in advance!

I've used both Audition and Pro Tools, and I like them both. The majority of my DAW work is just recording voice-over tracks, so I'd prefer to stick with Audition.  However, ProTools has the TCE ability which stretches or compresses with practically no distortion. Would the Clip Stretch for Audition do the same thing?  From the videos I have seen, it appears there can be some distortion - PLUS it only seems to work in the multitrack, whereas I work almost exclusively in the waveform...

I changed some settings in Audio Hardware and since then everytime I play audio, a static feedback/white noise plays for about 30 seconds then stops. This also coencided with my installation of Catalina so it wouldnt surprise me if the issue has something to do with that. To be clear, this issue is happening everytime I play audio from anywhere on my laptop and/or everytime I open audition. Any help is appreciated, thanks. 

I'm processing my first audiobook files. I'm making good progress removing unwanted sounds. I'm aware of the requirements for submitting to ACX.I notice in a big file that the sound wave varies a bit in mass and height. I have done Match Loudness across files. I made them all -21 Total RMS. I'm not positive what that means but the Amplitude Stats look similar now. Still when I look at the wave for an hour-long file in one view I notice some wandering up and down in overall height of the outer "fuzziness" and the center solid mass. Should I do something to level that out? I've seen "Normalize" mentioned. There's also Speech Leveler. ? Should I be making the Total RMS and *Average* RMS all be consistent across files? Thanks!

Hi thereI've started using Audition with my Blue Snowball Mic. I've used this set up before but for some reason, today I cannot start recording. My microphone is working and I checked in settings. Audition is offering it as an option but has (not working) listed. I've adjusted t make sure the input and output sample rates match as I remembered that stopped my last time but now I get the error "selected audio device has no input channels available". It asks me if I want to open the hardware settings. I do and I've checked the microphone is enabled, it is. I cannot do anything about the channel mapping and again, I see (not working) after the snowball mic. Can anyone help? I'm stumped.

Hello! Last year, I saw a video about using the parametric EQ to reduce room echo. The guy showed how to do it manually by sweeping through the frequencies and reducing them, but then he showed a quicker way to do it by creating a certain curve. Seems like I remember it looking like the first part of a sine curve. This helped so much, and I made myself a preset to use whenever I needed. Last month, work gave me a new laptop, and I saved everything except my custom presets, of course. Worse yet, I cannot remember what that curve looked like to recreate it. I tried, but it doesn't reduce much of anything. Does happen to know what I'm talking about?? LOL If so, can you please help me? I'd appreciate it!  

 I try install, uninstall, install other version, what can i do?

Does Audition havwe the ability to create speech from other audio? Here is what I mean...I have an mp3 of my father in law speaking. I would love to be able to create a message to my wife using his voice as they were very close. It would be special to her. Does Audition have that capability? Like something to analyze the mp3 and create a speech profile or something?

I recently filmed a few football games, and plugged my camera directly into the microphone they used to announce the game. every time the announcer switches the mic on/off to speak, there is a static pop/crack. He doesn't usually speak for about a second or two after he flips the switch, so there's some space between. is there a plug-in that would recognize and isolate these short and loud pops so that I could try and remove them without scrolling through hours of football games? thanks!

Hi there, I couldn't open files in Audition after upgrading my mac to mac OS Catalina. Dragging documents still works though and it's the only way to open a file. The screenshot is attached. I would be very grateful if anyone could help me solve the problem.

In multitrack, is there a way to click on a clip (that has been cut/trimmed) and, basically untrim it? Like "extend clip to full length" -- instead of having to mouse over the edge of the clip, get the "]" 'red bracket' cursor, and drag out the clip. Further more, would there perhaps be a way to basically select the whole timeline, and tell it to extend all clips to fill gaps. Like it would re extend all the clips as far as they can go, unless there is another clip infront of it, in which it would extend up to that clip. i.e. a more automated way to do this: 

Overlapped clips has been reintroduced as a session preferences in Adobe Audition (13.0). This was a suggestion made by users on User Voice.    Let's discuss!

Hi guys, in need of advice. 2019 audition Currently trying to live record while monitoring. I Tried downloading asio but there is error on download  Win10 - XPS 2018Snowball mic How can I fix audio monitoring delay issue when asio download doesnt work? Any other options?

Not the first time I try to adress this, but with 2019 out, I still don't undertsand why Adobe wouldn't develop such a critical feature.Why can't I apply a set fade/transition to a bunch of clips all at once (like "apply default transition" on Premiere Pro) whereas it's possible in every single other audio editing software out there?I work in voice over production, and this really lacks in Audition. And no, of course I don't want to be moving by mouse some aproximate fades...

Hi thereMy first post, so thanks in advance any assistance.  First some context for the problem: I'm communications worker in a small charity, and Im using Audition CC19 to make podcasts. I had been using audio file on a server based on the office, though there is a process underway to move to the cloud.  I was using a specific participation to store and access audio files for editing.  I have a series of sesx file saved for a number of podcasts under production.  BUT while I was out for a few days that tech people migrated the source folders to the cloud and deleted the original source files Im using in my sessionsMy issueWhen I open up my save sessions and projects on Audition, all my files are now reading "offline"My questionIs it possible for an existing project/session 'point' to a different file source location and still keep all the editing, cutting, volume changes etc that have been applied to each file in each track in session view. And

I just updated my ASIO driver for my Focusrite Scarlet 2i2 (1st Gen). Not 100% sure that's the cause of this problem, but suddenly I'm getting intermittent crackling when trying to edit audio. It isn't in the actual recording. I'll listen to a phrase and hear crackling. Then listen the that same phrase again and no crackling can be heard. It's like it's something in the playback that isn't matching up.Any idea what could be causing this?Thanks!BTW - this is happening in both the CC version of Audition and my old standalone 3.0 version.