Audition

I am used to working with Audacity and recently made the shift to Adobe Audition, but I am struggling a bit. I do mostly narration and when I make a mistake, I used to just cut out a portion and then resume. But, when I record in Audition, I don't know how to explan it, but when I press stop recording, the way the waves are displayed as changed. I have it setup when I start to display a few seconds. I use the wheel on the middle of the mouse to scroll in and out, which I would describe as zooming in and out of the wave pattern. I think its nice to see a few seconds, because when I make a mistake I can just select the part I messed up and press resume and go again. Is there a way to disable this automatic zoom-change? I want it to always display the last I don't know 10 seconds of recordings and that's it.Can anyone help?

Hi Folks, Posted this question in Adobe Premiere group but received no replies. I am pretty new to Adobe products. I am performing a voice-over on a 30-min movie using Adobe Premiere. I am looking for an option, where, I can replicate the audio patterns of the original movie to my voice-over. In short, I am expecting that my voice-over should sound exactly as the voice in original movie. I am not sure if this is doable with Premiere or Audition. Also, the original movie has sound effects working in the background when dialogues are delivered. I am looking for a way to grab those sound effects behind my voice-over exactly as it is working in the original movie. RegardsTopics 

I use Audition for podcast editing - nothing too fancy, wav files from mics on four separate tracks, duration about an hour and individual compression/ vocal presets on the ffects rack for each track. With the last few episodes, I've come across the same problem - as I work on the project (editing out bits and muting/unmuting mics to eliminate bleed when only one person is speaking), the filesize of the session grows bigger and bigger, and audition seems to have trouble with it. I get frequent freezes - at first just a few seconds every now and again, but the more complicated the session gets, it eventually ends up freezing for a minute or more after a few inouts from me.  With my last project, the filesize when I first imported all of my audio was 11MB. I've just finished editing, and it's now 750MB! Surely can't eb normal that it's that big, just from adding edits? It's been the same with the last few projects I've made, even though I've started them from scratch

I think the answer is no. But, is there a way to type a number and have that be used as the value of a keyframe? I'm giving up after a few hours trying to get key frames to have values that are all within a 3db range and it goes -2, +7.1, +1.1, +9, 0, +5 etc. etc. etc.

Hello, I have been using Audition with no problems.  Today, the menu bars and everything at the top is missing (minimize, fullscreen, exit).  The program won't do anything and I have to go to Windows task manager to close it.  I have uninstalled and reinstalled at the same thing happens.  I would appreciate any help.

Have created markers and loop time of playlist in Adobe Audition. Success to monitor playlist. How to save the playlist into a audion file?

Hi,I have multitrack audio in FCPX which I have exported as an XML file.  I open Adobe Audition and try to import the XML file into Audition using XtoCC for mixing.I keep getting the following message:  Error:  This file is not supported by libsndfile. Code: 21.  File contains data in an unknown format.Can anyone help me  solve this problem? Hopefully,Martin Howells

Is it possible to put an effect like reverb on an input and hear it in realtime like in ProTools?

Is it possible to downgrade effects presets (or sessions) created in a recent version of Audition for use in Audition 3.0?Thanks,JG

I have a problem with an audio file of a speaking presentation which is very distorted, I can't recorder again. I would like to know if possible to eliminate/reduce the distortion ThanksAndrea

I use Audition to produce radio shows.  I have created a session for each show that I do, and have given them a name (name of the show plus a new number each week to reflect the show number).  Each week, I take the previous show's session, open it up, remove the previous segments, and then replace them with the new segments.  The show open, bumps, commercials, etc never change, so it's just the segments that change every week.  Once the final mixdown is created, I save the entire session with a new number, to correspond with the new show number (SHOWNAME SHOW 1, gets renamed to SHOWNAME SHOW 2 next week, and so on).  This process creates a folder titled "IMPORTED FILES" each week.  Inside of the that folder are all of the elements.  These elements are also individually in the multi track session where they should be.  So, this "Imported Files" folder is just making unnecessary copies of files, and taking up space.  Is there a way to make Aud

After updating to V13.0.2.35, I've lost the ability to Show Envelopes for third-party effects.  I can normally select any single attribute from Izotope Nectar 2 (like reverb-wet mix) and show that envelope to keyframe it.  The option to select anything from Izotope Nectar 2 is no longer available. I tried adding the native "Studio Reverb" effect; and that is available in the Show Envelopes menu. So this new bug seems to appear on 3rd party effects. 

 Does anyone know if it is possible to do a nonlinear speed adjustment in audition? The issue is that I have an old analog recording that is at the wrong speed, but it is a different wrong speed at the beginning then it is at the end, and the recording is about 15 minutes long. It is a very gradual change from beginning to end. I never thought that a 60Hz hum would be useful, but when you plot the spectrogram of the entire recording, you can see that a narrow-band of energy near 60Hz (correspoinding to the hum) linearly changes from beginning to end, so this means that while the recording is accelerating, it is a constant acceleration. Therefore, it should be possible to place two key points, one at the beginning, and one at the end, saying how much speed adjustment should be done and then the speed adjustment should linearly change going from start to end. Is this possible with audition? I know one could segment the recording into windows and do different speed adjustments in eac

with a music library, I like to populate both my wav and mp3 files with meta data.Audition file info has the following first few meta titles:Display TitleOriginal Artist (for standard RIFF) or  Song TitleArtist (for MP3 ID3 tag) These seem pretty self explanatory, But Windows 10 seems to have its own idea of  field namesI can figure out that Windows' "contributing artist" equates to the "original artist" or "artist" in Audition, but I can't figure out what Windows 10 column heading matches up to "title" or "song title"There should be a one-for-one correspondence, and I just can't find title or songtitle to display it with Windows Explorer (or whatever it is called in Windows 10) Can someone help me? 

(Summary:  The problem in my case turned out to be a simple dependency on user account folder locations.  The path to the Documents folder changed, and Audition freaked out.  Why Windows saw fit to blame it on MSVCR120.dll, I'm not sure.  For the full story, read the whole post.)I'm posting this here, in case anyone else encounters this same issue.  I'm also hoping this information makes its way to the appropriate people in tech support, so that they can better understand how to deal with the problem.  If my experience is any indication, TSR's are painfully under-informed on this problem.  As soon as the one I spoke with saw in the Event Viewer that MSVCR120.dll was involved, he told me the only solution would be complete, clean reinstall of my OS.  My exact reply was "WHAT???!!!"  There was no way I was about to do anything that drastic, just because one single dll file was throwing a tantrum. I knew there had to be a far simpler fix, and i

"Não foi possível localizar o ponto de entrada do procedimento??0ScriptObjetctDefinitionRegistrar@factory@dvascripting@@QEAA@PEAVScriptObjectDefinitionInitiatorBase@12@@Z na biblioteca de vínculo dinâmico C:\Program Files\Adobe\Adobe Audition 2020\dvasystemcompatibilyreport.dll."Ao abrir o audition sempre dá esse problema, como faço para solucionar?  

I'm sure there's something obvious I'm doing wrong, but I lose the HUD when switching from waveform to multitrack. I'm certain that "Show HUD" is selected in the View menu, and I've tried toggling it on and off to see if I can find where it might be hiding--with no luck. Thanks for any help you can offer. --Paul

What's a good way to add realistic texture to an otherwise smooth voice?

Hi, I have a podcast and have been using audition for months, only recently a glitch started in the audio throughout the recording. I havent done anything diferently so I'm not sure what could be causing it, however it happens every time now.I am recording with my macbook microphone directly on audition (not an imported file). Here is a sample of the audio with the glitch - the language spoken is in portuguese but the glitch is obvious with or without understanding the language. https://drive.google.com/open?id=1GGWciGnhaVfkeTrTobnirwUEjiFAjYXw I don't know if this is a problem with the way i am recording or something with the settings in auditon, any help is appreciated.Thank you,Veronica 

I've searched for help to no avail for this - but its a small problem that causes big headache. When using audition, if I click import or open, the search bar within windows explorer is completely inactive. If I type in a file or folder name to search, the window has no reaction. Does anyone have fix for this small but mighty problem?Using windows 10, latest audition CC if that's pertinent!Thanks in advance, community.-Jake

Yeah i am using old version so my pre-amp crashed which lead to the Adobe audition crashing.When i restarted the PC , all tracks on multi-track are empty even though the track numbers are there.Also the files are also there on .wav outside folder , however they are not on the multi-track.There were 3 options , Contuine later , which shows empty sessionContiune now , which recovers 10% of the session .and cancle .Now all options are gone and am left with empty session and track numbers (100 track and 5 buses with filters) Need your help , i've spent 10 hours on this 😞 

Hey folks! I can't for the life of me figure this one out. I recently switched my preamp and interface to the DBX286S and the Focusrite Solo 3rd Gen. Everything works fine in the free software Audacity, but I get no recording levels whatsoever in Audition. I have attached some photos to show you what my hardware settings are like. Ive been using audition since it was Cool Edit, and I'm stumped. It looks like it's all set up correctly.    Any insight would be greatly appreciated. Thanks so much! Dave.  

Hi,the voice recording I'm working on sounds too rough to me and I'd like to fix that and avoid it in the future. Not sure "roughness" is even the right term, so the below file first shows the original voice, and in the last fourth of the video I try to demonstrate what I mean by "roughness". https://www.dropbox.com/s/exzhd01y5go5cwa/1.1_mixdown.mp3?dl=0 I'd appreciate if you can point me in the right direction, thank you.

what effect could I use to make it sound like someone's talking to themselves, in their headlike in this videoat 0:55 to 1:04https://www.youtube.com/watch?v=9KSGUVcNfZM&t=64s

what effect could I use to make it sound like someone's talking to themselves, in their headlike in this videoat 0:55 to 1:04I still very new to audition, please provide me with step by step in detail thanks.