Audition

Hi, I have the option of using either my Focusrite Scarlett 2i2 as the master clock in Audition, (which I'm using as a USB interface to record from my XLR mic) or I can set the master clock to my output which is a DAC/AMP (Oppo HA-2 SE) Which is ideal, and why?Cheers.

Hello, Since 2017.1 i can't startup the app. I reinstalled couple of times, remove preferences, regedit, appdata and nothing helped. That was on my Windows 10 Home with the newest updates.  Last time I bought brand new Dell Inspiron 7567 with 4K option, Windows 10 Pro and even there it was still crashing at startup. So it's an app fault.How do I fix this problem and have Au run normally?

HI everyone!Im working on a multitrack mix, all the peak meters on each track are fine, they don't clip. But I just found out the 2 output and input peak meters under the effects racks of every track, which easily get red even though there's no effect (for example on the master track) , and I need to cut 10db or more to avoid it, losing a lot of loudness. My question is: since the sound doesn't seem to ruin when I let those 2 peak meters clip, can I just ignore them or it would influence the final result of the mastering?? Thank you!

Is it possible to share a multitrack project from Adobe Audition to Studio FX? My friend is using Studio FX, but we are working on the same project and we need to be able to send/ recieve the complete multitrack.

I have a brand new Sennheiser ME2 and am have trouble getting decent audio results. Camera is a brand new Canon XA30.   So I have two issues, one more pressing than the other:1) Figure out what's wrong in my settings...2) Fix audio in footage already shot#2 is my concern. Would anyone be able to tell me what's wrong by listening to a short clip? Or should I upload a video clip to YouTube. Please help, if possible.Thanks,.-john.

Can someone tell me what happened here and how I can reverse? When I hit play, the marker and time move forward but there is no sound:

Hi,I'm very new to Audition. We went to a recording studio where we recorded multiples tracks with Pro Tools.All our takes were exported to OMF.I imported the OMF project in Audition.All tracks start at 00:00 exept some retakes of vocals and Guitar solosOverlay takes (vocals, guitar solo) are on separate tracks.But there is an empty gap to the left of the overlay clipsOverlay clips start at 07:00.How do I fill the gap between 00:00 and 07:00 for the overlay takes?I would like to export every track as separate files in order to use them in my DAW.But then all tracks should start at 00:00I found a you can insert silence. This is a defined time.I would like to insert silence between 00:00 and start overlay clip.I searched the forum, but couldn't find a solution.How can solve this issue in audition?

Hey everyone,So I was going all crazy in karaoke mode, having a preset done to my voice adding reverb, noice cancellation etc in real-time when the sound suddenly stopped working.Allow me to elaborate: With a preset of reverb, noice cancellation and pitch, I was recording myself sing and adding music to it afterwards.This was going fine, and I was almost done when the sound suddenly stopped working. I tried to do playbacks on my own voice but got nothing. This had previously been working up to that point.The only time I get this to work now is if I use virtual audio cable(which I use to get good voice on skype, discord etc)'s additional program "Audio Repeater". As long this is set to repeating what I am saying, I get to hear the sounds I recorded on adobe audio CC.So... what can I do to not have to have the audio repeater running and still be able to hear my voice in playback like I just had? :S I didn't change any settings at all.Also, sorry for the messy explanation.

When sending a clip from Ppro to Audition for repair work the reference file always comes back as Non-Drop Frame TC, which is strange since I'm always working in Drop Frame. In order to get the TC to match properly I have to go into modify clip properties and manually set the TC back to Drop. Is there some preference setting in either Audition or Ppro that will get it to send back the same type of TC I started with? This is an amazingly annoying PITA in what is otherwise a wonderful feature of Ppro.By the way I'm working with the latest release of PPro and Audition, on a Mac Pro and cutting ProRes 1080P30.

Hello There,I have a weird issue.I wanted to control my loudness level on some sounds. All was working fine, loudness was detected correctly, but for a group of sound, it's impossible to make the loudness meter work. The ITU Column remains empty.I tried to delete all, refresh and stuff, but this group of sounds keeps having the ITU column empty. Is there something I missed? Thanks !

HelloFor some reason, in Audition ( latest version I think, on a Mac ) my space bar has ceased to perform stop and start playback and now only records. I've tried to remove that command from the keyboard short cuts menu but it's still doing it - any suggestions, please? it's driving me insane! Many thanks.

I'm having a hard time figuring out how to route channels through multiple buses?I have all tracks running through Bus A which feeds my Virtual 1-2 in my UA console for my cues.I'd like to route all the drums into a unique Bus for quick mixing.When I try to add another Bus to a channel...there's only the option to select 1 Bus.What am I missing?THANKS!

Looking for any advice or links to tutorials on how to optimize audio playback on smartphones.Audio tracks on my videos sound good when playback is over traditional speakers. However, on smartphones often background or music beds are not heard mixed with voice, etc. I am guessing that sounds/music/voice need to be kept in closer db range to optimize playback on smartphones.With most web content being viewed on smartphones, I was hoping to find a tutorial or best practices for optimizing audio playback on those devices while maintaining clarity on traditional audio systems.Any help/advice/direction would be greatly appreciated!Thanks!~

How many tracks can you record simultaneously in Adobe Audtion?

Does anyone know of a CMD key combination that allows for you to change the Bus routing for multiple tracks in the Mixer window?

Hi I have some audio files and when viewed in windows explorer there are fields like Name, Title, Artist, SizeHow can I edit this information in Audition. Specifically I would like the Title field edited as this is picked up by some audio players.

Is anyone aware of a field recorder that can record 4 inputs to a single .wav file, rather than 2 stereo files?

Hello. I've been working on a multitrack project in audition for a long time, never experienced this problem beforeYesterday I was doing literally final touches to the session, switching audio output between tv and speakers (I don't know if that's relevant). Everything seemed to be perfectly synced.At some point my video preview started to delay, and the audio began to be out out of sync (important - the beginning of the video WAS and still is in sync, for some reason. Disprepancies happen later). I cleaned the software's cache, thinking it was the performance issue. It was not.When exported to Premiere Pro, the same problem happens. Changing sample rates and frame rates didnt help, or I might do the wrong settings. Previous versions of the project began to be out of sync too.Exported video also has delayPlease let me know what kind of information do you require to help me find a solution for this problem.I don't recall doing anything else to make this happen. I kindly ask for your hel

This menu optionClip -> Silence selected clips in time selectionBehaves differently for two separate tracks in the multitrack editor, and I can't fathom why.On one track (the desired functionality) it simply silences the selected audio, but on the other it sets two keyframes at -inf and hence affects the entire track.Does anyone have any idea what has caused this? Is it something I can fix for the second track?Track one (good behaviour) before:Track one (good behaviour) after:Track two (bad behaviour) before:Track two (bad behaviour) after:

我框选一部分声音，播放的时候，不会放框里面的声音，而是播放全部声音，怎么办I choose a part of the sound box, when playing, will not put the sound inside the box, but play all the sound, what should I do?

Hi, I purchased this in 2011 and have had to erase my Mac. I can't find anywhere through my Adobe Login to re-download the software. Just keeps prompting me for a subscription to software I have already purchased!! HELP! I have my licence key - but no software!

Hello,I have multiple files that I want to increase the volume to be at a more normal level, but I noticed that when the volume is increased, I can hear some "clicks", a little bit of distortion, even though it's not too loud. What is happening? What do i do to avoid that?Thank you.

I want to put together several versions of a song that will have guitar backing (real recordings by me) with overlays of wind instruments, particularly flute. My partner will be doing the simple flute parts with a real flute, but when it comes to the more complicated solo flute segments – in a separate version of the same song – I may have to use a software flute, or other woodwind. And I want the best, outside of using a real instrument.GarageBand offers software instruments, but I'd rather not have it cluttering my system. So my questions are:1. Are there plugins for Audition that allow software instruments to be played?2. What alternatives are there to Garageband for playing and recording software instruments?3. Any suggestions for a USB keyboard, compatible with Audition, that has inbuilt software instruments, or third-party instruments, for generating realistic woodwind sounds? I'd prefer each note to have been individually recorded – and not synthesised from, say, one primary not

Hello,I have a WAV file with 4 channels. I want to delete the channels Ls and Rs. Is there a way to do that without using Extract Channels to Mono Files and without using a Multitrack Session (just directly delete them)?Thank you!

Hello community,First of all I am relatively new to using Audition, and I have switched to using it for the audio post production work and sound mixes i do on videos.The problem I have encountered, is that i have recently started a project with an OMF and video from a client, but now there is a new version of the video edit, which includes a new sequence. I want to know if there is a good method of being able to easily transfer the new OMF with audio and video into my already existing audition session, which i have done extensive mixing and sound post in already...I'm trying to think of what might be the best way to go about this? Would be great to know if anyone has answers Thanks in advance