Audition

Hi there, I'm thinking of upgrading from Windows 10 to Windows 11. Audition is the primary program I use. Has anyone here had any issues using Audition on Windows 11? Thanks!

Audition 25.0.0.47 on an M3 Max MBPFor ducking voices on a three way interview.I created 3 stereo tracks and 3 mono busses. Track 1, Track 2 and Track 3, Bus 1, Bus2, Bus 3.On each track there is an instance of Izotope Neutron 4 Compressor in FX slot 1.Bus 1 Send 1 is routed to Side-Chain>Neutron 4 Compressor (Track 1 - Slot 1)Bus 2 Send 1 is routed to Side-Chain>Neutron 4 Compressor (Track 2 - Slot 1)Bus 3 Send 1 is routed to Side-Chain>Neutron 4 Compressor (Track 3 - Slot 1) Track 1 Send 1 is routed to Bus 2Track 1 Send 2 is routed to Bus 3 Now when I try to Route Track 2 Send 1 to Bus 1, the only option available is Bus 3, I can't send to Bus 1, and if I send to Bus 3 from Track 2 I can't send to any bus from Track 3. So Bus 3 is now getting audio from Tracks 1 & 2 and sending that audio to the side-chain input of the compressor on Track 3, as expected, but the other busses are only getting one input each. It seems like the sends are disabled because Audi

Hello All,I'm using Audition v.25.0.0.47 on a Windows 11 PC, and I'm having problems with mapping 5.1 channels.My PC is is connected to a Denon receiver. In the Audition audio hardware settings I have the default output and the clock set to my home theatre speakers. That's the Denon. But when I go to channel mapping, it only has options for the L and R channels. Everything else is unavailable. I've been through every option I can find, and have watched numerous tutorials over the last few days, and I cannot figure out what I'm doing wrong. Any assistance is appreciated.thanks!  

Audition 24.6.3.2, 2023 MBP M2 Pro, Sonoma 14.4.1, Samsung 4TB SSDI've imported a WAV file into a new project, placed it into a multitrack session to trim the head and tail (church sermon), and exported a 192Kbps MP3, just under 23 minutes long. The MP3 is needed elsewhere as-is, but I do import the cleaned-up file back into my project and place it in the multitrack. The file shows up grayed out, doing some sort of conform process, with a time estimate that grows from just over an hour to nearly nine hours. I let the process run and, after about 45 seconds, the clip shows up normal and we're ready to work with it. The first couple of times this happened, I force-quit Audition and exported a WAV file instead, but I'm trying to keep my year-long project folder to a reasonable size, hence the MP3. Today I let the process finish and all seems well, except for this apparent bug. Thoughts?

I have tracks that are MP3 files - mono, 192 - they came from mono 44100 32 bit. I can look at them and play them as single tracks, but if I drag them to a multi-track session the file turns into static.

Hello, I created an audiobook with 16 markers. Then I exported all files to separate mp3 files. 2 of the files where destroyed: they had at the end a strange loop of words or even a part of a text from a completely different chapter (marker). It seems that it appears only at the end of some files.Because I didn't recognize, I uploaded the files to audible - GREAT! Can somebody explain this?Did someone have the same problem?I am using Adobe Audition latest version 11/2024 Regards,Mario   

A few weeks ago I encountered an issue with the Delete Silence process. I have tried many different settings to define silence and audio, I do "Find levels" and then "Scan" but then nothing happens, there is absolutely no list that appears with the silences. I have since then done this manually but I'd like to know if there's a known workaround for the future or if I did something wrong? I'm on Windows.

Hello - I'm just trying to see the exact length of highlighted selections of audio. When I open properties, it's only giving info on the whole file. I need it down to a fraction of a second, and I'm trying to do the math in my head! What am I missing? 

Rack effects completely broken in new Audition... all black.How is this okay? 

Hello, I have a very powerful computer with a powerful processor. I used to work with the old Adobe until now and I didn't encounter this problem and I would appreciate help. Every time I start playing the track with the spacebar, it takes almost half a second for the track to start. It's very annoying and inconvenient to work with. In the old auditions, it always goes online when I press the key. It's important to note that I work with a wireless keyboard (but I also worked in previous versions). Is there a setting or something that can be done to improve the editing process and so that the key works without delay to start the track?

When I edit wave / MP3 files in Adobe Audition, Build 24.4.1.3 ... I convert it to 44.1 Khz (sample rate doesn't matter) and from either 8 bit (or 32 bit) to 16-bits, and save it ... If I exit and re-load it into Audition it's 32 Bit float (sample rates are correct, just not the 16 bit depth). I even loaded a saved file into VLC and it's also says 32 bits. Steps To Repeat:1. Load an audio file, convert it to, or make sure it is 16-bit audio (ss1.png).2. Save-As, make sure it's 16-bits, mp3. I used "Test.mp3" in this example.3. Look at the file in another program, such as VLC, and it's 32 bits (ss2.png).4. Re-load it (open) and it's 32-bit float (ss3.png).

Hi all, I used Adobe Audition to record a voiceover via Rode Wireless GO II microphones and on several occasions (always at the beginning of a take) it cuts out briefly/fades the voice in, as if the software is just waking up and recognising the microphone. I have tested the microphone with basic Windows recording software and this worked just fine, so it's definitely Audition.Is there some feature I have switched on/off that will help? I have attached a clip of the recording as an example. Many thanks

Hey boys and girls, Just before I hit update on my Mac... anyone had any issues with the new Seqoia and the running of Audition? All plugins working and behaving like they should? Thank youuuuu. RB

Hi,Typically, I keep great notes when editing configuration files, but several laptops later I seemed to have lost them.  I recently installed the latest version of AU on a new laptop (version 25).  The default Duration in the Multitrack Session is 30 seconds.  On my previous laptop, with an earlier version of AU installed, I found out online how to edit a configuration file that sets this value to 30 seconds (might have been an .XML file) and was able to set the default Duration to 4 Minutes (it's the preferred duration length for the work I do).  This is how I had the view set up in Audition 3.0 (which you could configure without editing a Config file).  I can't recall what Config file to edit to make this change and have not been able to find the online instructions I found several years back on which file to edit.  Any assistance would be appreciated. Rob

I edit podcasts for a living and have an issue with Audition that's been bugging me for literally years. As shown in the video, while editing out hesitations and stutters, sometimes Audition won't let me delete a selected clip during playback in the multitrack editor. I have to stop playback, delete the clip, and resume playback. It happens maybe one in every 5-10 edits, which is enough to be hugely annoying, to break my flow when editing, and add up to a lot of wasted time. I'm on a top-end Macbook Pro and have had this issue with every version of Audition I've ever used. Any suggestions? This has been driving me nuts for YEARS. 

I'm trying to correct plosives in one of my tracks in Audition 22.0. I highlight the area with the plosive, click on "Effects" at the top, then select "Filter & EQ" then "FFT Filter." Then the Rack Effect - FFT Filter window opens. At the top there's a drop down menu for "Presets" from which I choose "Kill the Mic Rumble." But in tutorials online, there's an "Apply" button at the bottom of that window in past versions of Audition. In 22.0, there doesn't appear to be an "Apply" button. So how do I apply the "Kill the Mic Rumble" effect. Or is there another, more simple, less time consuming way of eliminating all those plosives?

I have a new condenser mic connected to my Mac (OS 11.6.6) via a USB interface. Audition sees the mic in Audio Hardware prefs, but I can't get Audition to actually /hear/ the mic, that is to say, when I try to record it captures only silence, but it gives me no errors. When I switch the input mic to my Mac's built-in mic, it also cannot hear, but again it gives no errors. I see the mic levels in my Mac system preferences,  and I can use the mic to record in Premiere and in Ableton, so I know the mic and interface are working fine. Why can't Audition hear the microphone?

I am having an issue where there is a digital tone being introduced into my recording. I seems to neatly hit on 2k, 4k, 8k, 10k, and 16k. I believe its a digital sound being introduce. Any help on this would be appreciated! I've tried uninstalling and reinstalling drivers, changing latency, changing cables. I believe its internal to the computer. While some of these changes may work for a bit, the digital tone comes back and in the case of changing the latency, different clicks are introduced causing me to have to go back to my original latency setting.

Just curious... Can volume keyframes be copied from one track to another... or can multiple tracks with keyframes be adjusted at the same time? If not... it would be super helpful... If so super please let me know how. I haven't been able to figure it out yet and haven't found a solution. Thanks!

I'm using the latest version of Audition on a Razer Blade 16' laptop with Windows 11 and this issue happens everytime and I get an error message. This also happens for shortcuts to open a file such as clicking on a blank area of the 'files' dock or by opening up computer location manually to save a file. Just to be clear though you can still save files but you have to copy and paste in the address without going into computer location within Audition.  I have 32 GB memory, more than enough storage and have checked for any dodgy files in my C drive that may be creating this crash.  I have used CCleaner to uninistall and then reinstall fresh but this hasn't worked. Attempting to install Audition on a separate hard drive hasn't worked either.  I have looked for fixes online and tried everything and nothing works.  Would appreciate any help as this is becoming a nightmare.  I have attached some relevent log info and system info.  P

I'm having the same issue in both 24.63 & 25 versions of Audition: During playing back of the multi-track, certain sections of the audio are "missing" or don't play.  But when I roll the playhead back and play again, the audio is there.  In the mix down, the same sections of audio are also missing.   The referenced wav files are all intact, no playback issues. I had originally edited the multi-track audiodrama in 24.63 and thought perhaps that was the issue and started using 25 but the issue remains and it's the same "missing" sections in both versions. I'm going to try clearing the cache and restarting to see if that resolves the issue but could really use some guidance from an expert who may know what's causing this issue.

Hi all! Is there a way to make changes or settings in Audition that will take affect on every user on the computer?I work in an office with communal editors. I know that when you download audition to a computer it becomes available to use for all domain users on the computer. However I am curious if I can make changes in audition that will translate to every account on that computer? For example, is it possible to have the Noise Reduction (Process) plugin be automatically applied to every session of every user on the computer when recording voice-overs?  

Hello. I have a recently emerged problem: when I record my podcast in Audition through my Rødecaster Pro, Audition has started recording the audio from all 3 microphones on all 3 tracks. This has never happened before, and I can't figure out what to do to change it. Does anyone know what might have gone wrong?