Audition

Hi,I have the Adobe Audition 2.0 and just re-installed on my new computer (PC). But I am not able to activate it as the phone activation has also been discontinued.Please help!Thanks,Rupa

I am working thrugh the Audition CC lesson book, and I have downloaded audio files that go with the lessons. In the hardware setup directions the book says to connect my audio source, in this case an Ipad, into my audio input jack on my computer, and my speaker source into my output jack. But my Windows laptop only has one 3.5 mm jack for a headset with a mic attached. So how would I set up my audio output? In the Audition hardware setup page it shows the input hardware as two channel, and for the output page there is no 24 bit option - just 16 bit. I do have the 44100 Hz option ofr both. Thank you.

Hi, I have a question, I had to reinstall audition, but I don't know how to put it back on a function that I had before, when I moved a clip to align it, a dotted blue vertical ruler appeared along all the tracks and it disappear when I release mouse button, this helped me a lot to align without snap, but I can't find how to activate it again.

does anyone know how to get back to continuous play while highlighting and deleting in a audiofile without it skipping to the highlighted section?

I cant export my audio file and there is a message further - An error was encountered . "Unable to write data to the temporary file system." What am I going to do?  

Hi,I have a problem getting the Text to Speech functionality to work. I have added new languages to Windows 11 and chose James (Australia) as Default Voice in Settings/Time & Language /Speech. I have also tried to add ones via Windows Narrator. Even though they seem to work in Windows, eg in the Narrotir, they will not show up in Effects / Generate / Speech and only the basic US/UK voices are available. What is going wrong, and how to fix it? Thanks in advance for the help, magnus  

Hey everybody,so has of recently my Adobe Audtion is not working. At first I thought maybe it was the app or my laptop, but to make the story short, it turns out that its my sample rate of my mic and my laptop speakers not being the same rate.  Alrighty, so I looked up everything that i can do to fix this and at the same time researching if it could be some other problem but I'm 100% sure it's the sample rate. Last time i used it was like 3 months ago and it worked find and I've had used it ever since and even then it would work find. My mic, it's a hyper x mic btw, not sure if that changes anything. Anyway, I've tried changing it but my speaker is all grayed stuck at 24 bit, 48000hz, while for my recording I can change it but it can only go up to 2 channel, 16 bit, 48000hz. Ive tried everything and this is my last resort so if i can get any type of help with this, I would really appreciate it! Here are the screenshots:

I have two fairly good condenser mics that I would like to use for a two-mic set-up for Audition. I am using Windows 10. I know I need some kind of interface. Obviously I will need phantom power for both plus two headset inputs. Should I use a mixer or a simple interface like the Scarlett? My price range is between 200.00 and 400.00. Any help would be appreciated.

Hello everyone,I have downloaded and installed Adobe Creative Cloud desktop, and then installed Adobe Audition.  All went good.  When I launched Adobe Audition, it gave me a couple of error messages regarding missing DLL files.  I checked the Adobe folder for those 2 missing DLL files and they're actually there.I have been doing some research about the issues similar to what I have, and one post mentioned that Adobe Apps won't work on Windows Servers?  Is this true? Thank you,-Firas

One powerfull functionnality of Adobe Audition 3.0 was to be able to zoom in anywhere into a temporal signal, we could even decenter the signal to zoom into the highest values of the signal. Today with Adobe Audtion 23.5.0.48 I am only able to zoom in around the zero axis, thus I can not have a closer look anymore on the peaks of my signal, and this is really annoying. Is there a trick somewhere to be able to zoom anywhere in the temporal signal? 

Hey guys, question about "detected dropped samples". I know why it happens and I know how to mitigate it. My question is this: do these dropped samples appear if I export the multi track? (Or are these samples only appearing because I'm playing the audio and therefore don't translate to an export?) thanks!

how can i solve this problem?i cannot exporting mp3 extention .my be becouse i installed premier and audtion at the same PC ?!

I'm trying to save a file I recorded earlier, & I get this error message every time:  "An unknown exception was caught (Code E06D7363)."  Each time I try to save it, it goes along fine until 22%, then it freezes up & I get the error message.I don't want to have to rerecord it all again, but I don't know what is causing this error.  I recorded & saved something earlier today & everything was fine.Please help.Thanks,Alyx

Hello, someone knows if there is some driver to add the option within the surface control in the preferences, to be able to control correctly in audition the sound with ShuttlePro 2I see that there are several devices available, but not the one I need ShuttlePro2, I would like to be able to reproduce with the wheel of my device just as Ahce with video programs, some idea?

I recently upgraded to the Adobe CC full plan last month and was able to quickly open high-resolution WAV and FLAC files in the new version of Audition within seconds. As of yesterday however, opening a high-resolution file now takes minutes to open. Similarly, doing any simple processing like EQ on the same file takes more than five minutes. After saving the changes, it then takes a further five minutes or so for the program to close down. The rest of my computer is running fine, so it is not a system issue. I downgraded to an older version, reset my preferences folders (I do not remember which order I did that in) and have tried again but opening a file still takes much, much longer than it used it. Is anyone else suddenly having this problem or had any luck in fixing it? Thank you all.

Greetings community,   Something I'm struggling with using Adobe Audition is a very strong lag/chop with the message "Detected Dropped Samples" at the bottom-right of the software. This does not happen when I first start a session but more-so once I'm pretty stacked on tracks. It runs smooth and I have a great time mixing the tracks as I go (verse, verse addlivs, chorus, chorus addlivs, etc). BUT, once I get pretty stacked on all the different type of tracks and live effects, samples start to drop and the choppy lags happens! (I'm guessing my computer is weak??)    This is when I do the ol' go-to solution from all other posts and adjust the latency! I put it all the way to 500 just to see would there be a difference.. .. no!  Put it all the way at 30, computer pretty much crash!    My question is, what is a solution to "speed" up Adobe to get the song finished once a session gets pretty stacked on tracks? What are some tricks? I don't have a Mac Book Pro n

Which mics are best for recording podcasts in order to spend less time with editing? And, are headphones necessary? The mic I have now is decent, but there is a constant hum in the background that is difficult to get rid of. 

On Adobe Audition 3.0 we could choose an option to "synchronise the cursor on woindows". It had allowed to apply the same zoom in amplitude to all the opened signals. With new Audition, we can still keep the same zoom in time for all the signals but we have to zoom in amplitude for each of them, which could be really long!Is there an hidden option sowewhere to make this functionnality alive again?

Yesterday evening, after a long day of editing, all of a sudden, my secondary screen turned black. Audition was open on my primary display However, I noticed that switching to another app (like Notepad++) makes the secondary screen display images correctly. Tried to reset the workspace, rebooted my computer, restarted Audition, but no effect. Not even the Maximum Editing - Dual Monitor workspace works correctly.http://prntscr.com/ptnxax   This is  the latest Audition log: Log file created: 11/5/2019 9:20:20 PM----------------------------------------Ticks = 0 <20852> <AuLog.Startup> <5> Begin startup sequenceTicks = 1438 <20852> <MediaCoreInitializer> <5> Initializing PRMTicks = 1438 <20852> <AuLog.Startup> <5> Initializing XML LoaderTicks = 1485 <20852> <AuLog.Startup> <5> Initializing Application SettingsTicks = 1969 <20852> <AuLog.Startup> <5> Application: Audi

I have a multitrack file where the playback sometimes doesn't play full sounds.  Sometimes I'll press play, but it doesn't play the full sound when it's playing.  This multitrack that I use has 18 tracks, a lot of distortion, and has lots of effects.  I don't know if those factors play any roles or not.  I am showing the multitrack here.

I'm editing lectures, there is air conditioner noise in the background, I reduce it through the noise reduction effect, but the problem is that it creates a bit of an echo at the end of each sentence.My question is how do you overcome it? What parameter should be changed in the settings so that this does not happen? 

I have version 3.0, and on my laptop I can only hear through the computer speakers, not through the headphones. How do I overcome this?

So this is new. Audition and Premiere on my M2 MacBook Pro is crashing any time i go to open anything in settings. I tried clearing cache, preferences, reinstalling and the problem persists. Anyone else??? Using the latest proper release.   [Mod note: Moved to a new thread of its own]

Hi, my Audition is glitching out like crazy, whenever I zoom in it copies things from other tracks and places them in other places. It isn't affecting the audio at all, it's just a visual nuisance as it won't allow me to time things correctly. photo attached. Running 13.0.9.41

When adding a cue marker to an audio file, the playhead stays stationary but the view always jumps back to start of file. How do I stop this behavior? Very annoying.