Bridge

i have the latest version of bridge on a 2021 m1 imac but everytime i launch bridge it just crashes a few seconds later, does anyone have any ideas?

I have a CC membership and recently updated all programs to the 2023 version.  Now, when I browse files in Bridge from PS, I cannot doubleclick the files to open.  Bridge gives the error message "Could not open X because the file is empty".  I can open (mostl psd files but also .jpeg etc.) with the open comannd from PS or by doubleclicking on the file.  These are files I have opened this way in the past.  Thoughts?  Upon one restart, I could do this, but when I had occasion to restart again, I am back to this error.

Everyone, I am desperately hoping someone can help shed some light on an issues I am having. A little explanation on our current setup...We have 2 Macbook Pros and a Mac Pro. The Mac Pro is set up in house as a server with 2 of the drives setup as RAID. My wife is a Photographer and after she is done working on session on her Macbook she will move the entire folder over the RAID on the Server to keep a backup of everything and to keep it organized. Yesterday she realized that there were still some personal pictures on here MacBook under the folder 2015 (for example the Server had months Jan-Aug but not Sept - Dec). So before bed she went into bridge and "Moved" them to the RAID on the Sever. On the server the folders are typically under Personal Backups/Year/Month.Last night when she tried to copy everything over she just moved the folder of 2015 to the root folder of the RAID. So right now when we look on the RAID we have a folder called 2015. Then we have a folder under Personal Back

I updated Ps, Br, & Raw to 2023.Now...2023 Br crashes at launch.The installation of 2023 also caused trouble with Br & Ps 2022: 2022 Br & Raw work until I try to batch with Ps or Image Processor with Ps from Br: Tools>Photoshop>Batch or Tools>Photoshop>Image Processor.  I get: "Install latest version of Photoshop to continue..."  I have installed, uninstalled, reinstalled 2023 Ps several times with no help.  I can open 2023 Ps normally just fine.  I can run Image Processor from 2023 Ps: File>Scripts>Image Processor just fine.PC, Windows 10, 32 GB Ram

My workflow calls for updating metadata (IPTC Core -> keywords) for each of the image in an set. Basic information about what/who/etc on the image. Since at least Bridge Version 13.0.1.583 the metadata panel does not refresh when switching to the next image. Basically always showing the last update to the metadata.This happens all the time after I have changed the metadata for one image. Any image I preview afterwards will show the metadata (IPTC Core) of the image i made the update. It does however not update the metadata for any other file. Once I restart bridge it will show the correct values for all images until I make another change to one image. A refresh (F5) or purge cache does not seem to help either.BTW: I tried the BETA version (V 13.0.2.630) and the behavior has not changed.

After installing dropbox for macos I cannot see the dropbox photoshop files in their new location of "location".  I cannot access or "see" them in the "folders" in bridge, Help!!!

Depuis le version 2023, impossible d'afficher les étiquettes, les notes, les étoiles et donc de faire des tris.

Hello together, i searched the SDK docs but i wasn't lucky. All i found was save as jpg/png.Is there a method for converting raw files to dng programatically (extendscript)?

I have the latest version of Bridge installed 2023. I am using Windows 10 Pro. When I ask Bridge to Get Photos From Camera and go to the Advanced Dialogue it is showing a duplicate of each RAW file. If I continue with the download the duplicated files are there and numbered _DSF1656-1.RAF. _DSF1656.RAF and so on. I have carried out all checks on the camera - Fujifilm X-T5 -  to ascertain that nothing is being duplicated in camera. I have also checked everything in Bridge that I can think of. Advice required please.

Hallo, habe auf dem neuen iMac mit Ventura die Bridge CC installiert. Wenn ich in jetzt in einem Ordner die Fotos mit der Leertaste in der Vollbild Ansicht durchsehen möchte flackert das Bild jedes Mal auf! Das ist sehr nervig und spätestens nach dem dritten Bild höre ich deswegen auf! Davor hatte ich Photoshop CS5 mit der dazugehörigen Bridge CS5 auf einem iMac von 2010. Würde mich sehr über Abhilfe freuen! Danke im Voraus!Christine 

I go to bridge, click on the picture, any picture and press space bar to view in full size, I get a message Bridge has encounatered a problem with GPU hardware and so on, says it will switch to software rendering and it is clicked next time I come back, but still not able to use bridge to view full size raw format pictures. Tried everything and updated hardware driver. It didn't happen in the previous version, gave some message, but worked, but now it keeps crashing and shutting off bridge every single time. What can I do to fix this, because it is very sad that I was able to use it with previous version and new version broke something that is no longer working for me. 

Ever since updating to Bridge 2023, Filter Panel keywords are sorting caps first lowercase below. I need the keywords to ignore caps but can find no settings to set the sort order in the Filter Panel. Any suggestions? Ventura 13.1 on a Mac Studio. Thanks. 

<BEGIN RANT>I have been unable to use Bridge for days and Adobe Support has been completely unhelpful. When I get connected through chat, the rep says they are going to look up information in my account and after a while, I get disconnected. Sometimes it's the same rep. They shouldn't have to look up my info when they just looked it up! Why am I paying for a software subscription if I can't use it?<END RANT>Here is what happens:I open Bridge and a pop-up window appears (see attached) telling me that a collection target folder cannot be found. I click "OK" and the window disappears and reappears quickly. I am unable to get past the pop-up to use the app. I can't even close the app. I have to go to Task Manager in Windows and end the task.Here is what I have tried:I uninstalled and reinstalled the app, preserving my preferences.I uninstalled and reinstalled the app, deleting my preferences, then letting Bridge search for and import them.I uninstalled and reinstalled the app,

With the last update of Bridges 2023, I can no longer open the application. It gives a keyboard incompatibility error and tells me to check the internet connection. I uninstalled the update and it started working normally again.

If I have already expanded the directory once with the arrow in front of its name (to show subdirectory), then the double-click successfully expands it, but if it was not expanded before, then double-click do nothing at all. Apple M1 ProMac OSX Ventura 13.1 (22C65)Creative Cloud Bridge 13.0.2

Would someone please explain!!

Since the last uodate to Windows 10, Bridge will not load and I get the 'Not Responding' message

Any suggestions? 

I need some help with these random crashes. <crash exception="EXCEPTION_ACCESS_VIOLATION" exceptionCode="0xc0000005" instruction="0x00007FFEE7F13436">  Update: It started crashing every 1 minute. With GPU selected and without. Going back to Bridge 12. 

It has always been a great feature in Bridge to run the program in one language and to use a keyboard in a second language. That way I could use the Bridge in its native language, but the program knows that I have my German keyboard hooked up.Bridge always had (and still has in V13) two dropdown menus in preferences to set this customization. You allow users to set a mismatch between GUI and keyboard – and on the other hand you (starting with V13) complain that this is wrong.There's nothing wrong about this mismatch – I run the full Adobe Suite that way. But you are correct with keyboard shortcuts, which might not work. This doesn't matter in Photoshop or InDesign – here you simply remap the few shortcuts that break. The error message is also nonsensical, as users, without changing to another physical keyboard, will very likely not change the input language: Keys would no longer type what they say.So please remove this nag-screen and do what Bridge users asked for since version on

After todays update i cant use bridge. Already tried uninstal and reinstal and is still giving this error and if i click dismiss it closes the app.How can I adress this issue? System: Macbook pro 16 Intel i9 with MacOS Big Sur v11.7.2 error 

Bridge gives an error on startup. The program cannot be closed by regular methods. The problem appeared before the last update and did not disappear after the update. Reinstalling the program didn't help.

Dopo l'aggiornamento alla versione 13.0.2 non riesco ad aprirlo perché mi dà un errore. Cosa dovrei fare?

Is there a way to get the 2023 version of Bridge to display the number of keywords in the metadata of an indivdual file?I used to use an extenion called "inspector" but it appears that extension no longer works with the new version of bridge.

Hi! I have a PSD file with artboards in different sizes. I'd like to know if there is a way to export several PSD files with artboards through an Adobe Bridge preset. I've made this easily with regular non-artboards documents, but doing it with all kind of documents would really improve my workflow, since I need to export some images with optimized filesize for web. I know this can be done through Export opctions in Photoshop, but using Bridge is easier and faster for me. Thanks in advance for your answer!