Bridge

Hallo,seit ein paar Tagen kann ich zwar Bridge öffnen, aber wenn ich irgendetwas machen möchte, kommt als Hinweis "keine Rückmeldung". Und dann rödelt das Programm.Wenn ich zwei Bilder markieren möchte, passiert das gleiche.Ich habe Win10.Das Programm habe ich schon einmal deinstalliert, doch der Fehler bleibt trotz Neuinstallation bestehen.Wer hat eine Idee?Nachricht geändert durch Norbert Benike

I'm pretty sure this used to work, but not 100% certain:When I open multiple images in Camera Raw, I can select them all, then make changes that affect all the images, such as clicking "Auto" in the Settings section (for example).But if I change the Exposure setting, only 1 image is affected. The exposure setting doesn't change for any of the other images that are selected.Is that a bug? I hope so, and hope there's a fix, because I want to change a few hundred Exposure settings.

I'm wondering how you can view your raw images in Bridge to show the 'lock' icon after you have locked them in camera.  Bridge used to do this but I can find that option now.

Hi there,I want to rename a whole lot of videos in a very specific scheme in Adobe Bridge CC.The scheme goes like:YYYY-MM-DD - HH.MM.SS - Name - 001The only place where I got a problem is with the HH.MM.SS part. I can choose HHMMSS, but cannot enter HH, MM or SS seperatly, and I really want the dot to separate them. I can do that in Lightroom but Bridge is much more interesting to work with in terms of organizing and renaming videos (like detail view instead of thumbnails, for instance). I'm sure there's a way to do this.Thanks in advance for any constructive advice

i followed all the instructions:How to install Adobe Output Module in Bridge CC 2017the Output workspace shows up in the Window > Workspace as it should, but the PDF button does not appear as it should:Create web galleries and PDFs with Adobe Bridge i've tried closing Bridge and relaunching it (and all other adobe programs and just launching bridge) but the tray on the right is still vacant, with no PDF button up top.your advice would be sincerely appreciated!

When I try to purge the cache in Bridge (CS6) the program freezes. And I can't proceed with Bridge without clearing the cache. I've tried restarting my computer, to no avail. Suggestions?

Hello, I have just bought a new 2015 Mac Book Pro with a retina screen.  My operating system is Sierra 10.12.3.I am using Adobe Bridge CS 6 which I purchased a couple of years ago.  It was working fine on my old Mac (no retina screen).However now the whole programme is pixelated - not just the images but all the type/ text within the app.  I can't work with it like this!  Can anyone help me resolve this issue?  Is there some kind of update/ fix I can download?Thanks,Alex

I have seriously have trouble installing the Adobe Bridge in the Adobe creative cloud but the creative cloud doesn't  provide the download for the bridge cc. I request assistance.

We have a team that is dealing with thousands of photos/videos, and we are using Bridge and Box sync together. Our workflow is that we view our box sync folder through adobe bridge to sort/search/tag photos. However, in our box sync we are seeing many versions of photos (ie: noted as V2, V6). We do not technically "edit" these photos, only added a few tags for initial uploads. Does adobe save a new "version" of a photo every time it is pulled up? or perhaps someone on our team has opened files in photoshop? Anyone else had problems with duplicates?I've also asked box sync but really no luck there. Any advice is helpful if anyone has dealt with simultaneous syncing/sharing/"editing"!!! thank you!

Trying to install the Output Module for Bridge CC, but I don't have (or see) an extensions folder for Bridge CC. It's not in Applications (where the "Extension Manager" folder for CS5 is). Where can I find it? (I would prefer not to have to go back to Bridge CS5 to make contact sheets.)

I notice that when I rename a keyword in a hierarchical structure it breaks the links to other keywords nested below it. Is there a way to do this so that any nested keywords under it retain their associative links, or is the name of the parent used like a primary key in a one-to-many relationship with nested child keywords using matching foreign keys, as in a relational database structure?

I am a Mac user and Adobe Bridge 2017 is getting stuck on "building criteria" and I have to force quit. When I open the force quit application it does not shown Bridge as "no responding" I followed adobe instruction for troubleshooting and nothing works. I uninstalled and installed again as well

I have a library of about 40,000 images, mainly raw and some jpeg. Each shoot has its own folder, and each year's worth of shoots has its own parent folder. This makes browsing each folder very quick, whilst tidying older shoots away until needed. Most of my images are tagged with keywords, including subject and location.Occasionally, I need to look at images with common keywords. This is where Bridge usually comes unstuck, especially if the number of results is in the thousands. I often dump the results of searches into a Collection, and then work with the Collection, adding and removing images as I go. More than a few thousand though and Bridge becomes deadful to use, with long delays after each action, even though I have a pretty fast and well-configured computer.Looking in Task Manager, I see that these long pauses show Bridge working at 12% CPU. My guess is that Collection and Filter operations on the Content panel are using one core out of 8 on my i7 processor. This is frustratin

Whenever I leave Bridge idle and open for a few minutes, when I return to it I cannot reactivate, minimise or close it. The only way to accomplish any of these tasks is to exit using ctrl-alt-delete and Task Manager, then re-open it. I am running Windows 10. Can anyone suggest how to correct this fault ?

Hi, I am posting here because I posted about this issue weeks ago in the Bridge forum, and nobody has attempted to help apart from suggesting I post here,I have just updated to a new graphics card MSI GeForce GTX 1050 Ti on my Win 10 64bit PC. But now Bridge just doesn't respond for ages every time I try to do something. I have uninstalled Bridge CC and then re-installed it but it hasn't solved the issue.Can someone help please driving me crazy!The folders contained Nikon .NEF files but the problem is the same with any image files.The Graphics card driver is: NVDIA date 01/12/16 Driver version: 21.21.13.7619Bridge Version: 7.0.0.93 x64Bridge has gone back to being very slow and "not responding" Not impressed.

I am trying to install the output module for Bridge CC 2017. I downloaded the file and followed the instructions. However, I do not know where to place the file. The extensions file that is outlined in the instructions does not appear to be a folder in my Bridge file. Is is called something else? I am trying to finish an online class and need help asap.

I have bridge CS6 - my main page looks like the image I have attached - I recently "wiped out" my computer and reinstalled all my programs. It was not like this prior to re-install. I was able to see a preview of the image. I am still able to see actual previews of my other file formats. The problem seems to be with the CR2 file.

Hi, im using a windows 7 desktop. My question is what steps do I need to take to upload numerous photos and then save them as one large photo, so you can zoom in and see them closer, thanks.

I have uploaded my photos through Adobe Bridge CS6. I am a photographer so these photos are for someone else. When she tries to email them, i wont allow her. I am guessing it is because of the copyright section when you save them through bridge. Is there a way to remove those copyrights or retrieving the photos?Thanks in advance!

Ich arbeite mit Adobe Bridge CC 2017 auf einem Mac mit Yosemite 10.10.5Sobald ich auf einen Ordner klicke, der ein animiertes GIF enthält, stürzt Bridge ab, bzw. friert ein. Lösche ich die Datei mit Hilfe des Finders und beende Bridge mittels Aktivitätsanzeige, funktioniert alles wieder problemlos.Besteht möglicherweise ein Zusammenhang mit dem Update auf das aktuelle Yosemite, das ich vor einigen Tagen durchgeführt habe? Als ich vor zwei Wochen zuletzt ein GIF erstellt habe, gab's keine Probleme.

Hey Folks..I am current on Adobe Bridge CC but I have an problemThis is all I see for filters right now.... and everything is checkedWhen I restart the program with shift option I see everything againBut if I go into a folder I go back to thisWhat the heck is going on ?FYI I have also removed and re added the programs... No luck same thing happens.

The Bridge search function now defaults to search Adobe Stock. If I open the Creative Cloud app, there's Stock again. I get that you want to push for it but come on, this is approaching Microsoft-Windows 10-annoying.Please stop forcing it upon users in this contemptuous way.[edited to use less annoying font-kglad]

It is well documented that editing JPEG files and then saving again causes image degradation.What about frequently amending keywords in Bridge (without image editing) i.e. making just metadata changes?Does this cause similar issues?

If I right click on image in bridge  it has default which is not photoshop cs6   How can I get my default changed to cs6??

If I right click on image in bridge  it has only 1 default which is not photoshop cs6   How can I get my default changed to cs6??[Title edited by moderator (B.R.)]