Bug Reports

Hi zusammen,  ich habe folgendes Problem mit meiner Photoshop 2024 25.12.0. Version: Wenn ich ein Fenster geöffnet habe und den Kopierstempel benutzen möchte verschwindet das Fenster um die Werkzeugeinstellungen vorzunehmen hinter dem Bild.Egal ob ich rechte Maustaste benutze oder oben in der Leiste auf die Größenauswahl gehe.Siehe angehängte Screenshots. Habe das Problem erst seit dieser Woche. Vor meinem Urlaub also vor dem 13.09.24 ging das ohne Probleme.iMac 27 Zoll 2017Betriebssystem: Ventura 13.6.9 Kennt das Problem jemand und hat eine Lösung? Das nervt mega und beeinträchtigt den Workflow immens. Lieben Dank schonmal und viele GrüßeCarina

So im having a photoshop problem and I can't find any solution... my keyboard shortcuts stopped working almost entirely. It works on other Adobe apps such as Premiere and SP and Illustrator, but PS remains stubborn to do nothing when I press any regular shortcut. The only thing that I noticed that DOES work is when I press the spacebar to use the Hand Tool. ( for example, B for brush, E for eraser, V for selection tool - all not working. CTRL+ anything doesn't work either). I reset PS settings, reinstalled it twice, changed system language to English - nothing works. If anyone has any ideas for a solution - I'd be delighted to try. Apperently the F keys (F5 - brush settings for example) still work. My mind is blown by the inconsistency with this issue

This is a bug that has existed since macos introduced time machine backups. As a user I think it is about time that this issue is addressed, it has cost me countless hours of work time that I had to use working around this bug that it has become really expensive for me. Step to reproduce: use a mac os system and run time machine. Work on it until disk fills up and do regular time machine backups. When the disk is full, free some disk space, moving finished photoshoots to a NAS is a good way. (Don't use lightroom when doing it, because it *will* eventually have hickups and fail and then a simple task of reliably copying a half copied folder to a new location becomes a pain).Now confirm in finder that you have more than enough disk space available to import a new shoot from a large card. You can also confirm that Lightroom will likely not reflect this and show a lot less space than is available (in my case just now it was 700GB! The exact number lightroom sees unfortunately is

Ich kann leider mit der Neusten Version 25.12 nicht Arbeiten, weil meine Pinsel dann plötzlich sehr stark zeitverzögert abeiten.  Gibt es schon hinweise zu diesem Fehler ?  In der Vorgänger Version habe ich diesen Fehler nicht

Hola, desde que puse un nuevo código para seguir con mi subscripción de photoshop se me ralentiza al punto de no poider trabajar, cualquier acción como juntar capas tarda más de 2 minutos, al cabo de un rato trabajando se va internet en mi ordenador ¿Le ha pasado a alguien más? ¿Habeis encontrado solución? Gracias

Alguém sabe o motivo deste bug?Acontece em tudo que eu faço na tela, exemplo: arrastar objetos usar ferramentas.Como visto na imagem acontece um bug visual

Unfortunately I have to revive this but:https://community.adobe.com/t5/photoshop-ecosystem-bugs/p-completely-broken-hand-tool-ps24-5-hand-tool-sticking-sticky-not-seeing-mouse-up/idc-p/14660275/page/26#M106438@CShubertsince you asked about this as the last post there:We wanted to update this thread that the issue was fixed with the release of 25.6. If you are still having this issue with the most recent Ps version, please start a new thread with your information so the team can investigate further.Unfortunately this bug is still happening to me on every single machine I own (all different PCs; all Windows 10 but each with otherwise different hardware specs - none of these computers have ever had a tabloet installed so there are no tablet drivers or tablet hardware associated with this). The issue was never resolved for me in 25.6 as said in that thread, but unfortunately has (and still) persists including in the most recent version. I am now on 25.12 and it is still a problem.I am not

Al momento de usarlo dice "No se ha podido cumplir porque ha habido un error de programa." y sus soluciones es solo ir a un foro de discusión. Ya desinstalé e instalé nuevamente para ver si así funcionaba pero nada.Photoshop Error informationCode: -1Text: porque ha habido un error de programaMessage: No se ha podido cumplir porque ha habido un error de programa.Stack:Adobe Photoshop 25.12.0 20240903.r.806 055f5e9 - x860 address: 00007FF6CFF1DC82 base: 00007FF6CC880000 module name: 'Photoshop.exe' symbol info: 'curl_formget:-1 in n.a.'1 address: 00007FF6CFECCDCD base: 00007FF6CC880000 module name: 'Photoshop.exe' symbol info: 'curl_formget:-1 in n.a.'2 address: 00007FF6CD0E3611 base: 00007FF6CC880000 module name: 'Photoshop.exe' symbol info: '??0?$singleton@V?$extended_type_info_typeid@VModeler@dbrush_0011011100@@@serialization@boost@@@serialization@boost@@IEAA@XZ:-1 in n.a.'3 address: 00007FF6CD0E162C base: 00007FF6CC880000 module name: 'Photoshop.exe' symbol info: '??0?$singleton@V?$e

Hi We are having a problem with Generator in Photoshop 2022. Photoshop 2021 works fine. Does anyone have this problem or a fix?   With Photoshop version 23.3.0  File Menu/Generate/Image Assets works normally on files on my local Mac Drive, but when running it on a file located on our company server no image assets are created. Note that it does create the designated subfolders, but they are empty. With Photoshop 22.5.7 generator works fine on the same file, on the same server. It generates subfolders and files. I am not accessing the file via VPN. I am in office. I have uninstalled the newer 2022 version and reinstalled it with no change in behaviour. All the setting seem identical in both versions. The generate jsx files in both Photoshop folders are identical. macOS Catalina 1-.15.7  iMac (Retinal 5K, 27 inch, 2020)   Thanks in advance, Ron Troyer  

So the thing is, every time when I try to open more than exactly 2 smart objects, my Photoshop crashes and I have to open up Task Manager and Kill Photoshop to get it back to work. This is getting irritating since I need to work on multiple files at once. I don't know if this is due to my system specs or else.It used to work just fine. But recently I am facing this.

The problems I’ve posted here since upgrading from Catalina and PS 22.5 to Ventura and PS 24.x included wonky Photoshop Manages Colors Print windows operation and info. Plus, when I hit ‘Print’ Photoshop sent data to the printer but simply spit out blank paper. After thoroughly uninstalling the Epson driver and PS and manually deleting the remaining folders and files and reinstalling the printer driver and PS 24.x over and again, still no luck. I got the same bad behavior.  Turns out the problem was the Canson paper’s custom .icc that I created and had been happily using in Catalina with PS 22.5. It not only doesn’t work in the upgraded OS and PS versions, it also causes the above-stated tear-ones-hair-out problems. What’s truly maddening: I could select that .icc profile in the Printer Profile window—it wasn’t greyed out and there was no other indication it was causing problems. And, though I’ve researched reasons for these kinds of problems, I haven’t read anything about th

(BR)Fiz atualização do Photoshop para versão 25.12 e minha ação programada para Navegação em guias usando a Roda de polegar  parou de funcionar, apenas nessa ação, as outras ações recomendadas pelo próprio programa estão funcionando normalmente, apenas essa ação que parou de funcionar, então diz o downgrade para versão do Photoshop 25.11 e voltou a funcionar normalmente, pelo visto o problema está na versão mais atual do Photoshop 25.12. Gostaria que esse bug fosse corrigido para poder usar a versão mais recente do photoshop. (US)I updated Photoshop to version 25.12 and my programmed action for Tab Navigation using the Thumb Wheel stopped working, only in this action, the other actions recommended by the program itself are working normally, only this action that stopped working, so it says downgrade to Photoshop version 25.11 and it started working normally again, apparently the problem is in the most current version of Photoshop 25.12. I would like this bug to be f

I'm trying to develop an Adobe CEP extension for Photoshop 2024 on my mac M3, but can't seem to enable legacy extensions on my settings pannel since it's greyed out:  How can I develop and test extensions on my system?

Bonjour, J'ai un soucis récent : Je n'arrive pas à basculer de lightroom à basculer Photoshop avec mes photos au format CR3. Pour le format JPEG, aucun soucis. Mais lorsque je fais CMD + E pour modifier dans photoshop avec le format CR3, il ne se passe rien.  Pouvez vous m'aider ?

Once again I upgraded to Mac OS 13x from OS 10.15x on a 2020 Intel iMac that’s still running PS 22.5 hoping to avoid problems I previously encountered.  No luck—this time due to new problems printing to the Epson SC-P800 I’ve deleted all P800 in System Settings, /Library/Printers…, /Library/Preferences/Adobe PS (1999 the 2021) Settings folders.Additionally, I reset Printers in System Settings, downloaded the appropriate print driver from Epson’s site, and rebooted the iMac, the Epson, and PS…numerous times. The problems: 1) In the Print Settings window to open Printer Manages Color (in Color Handling) I need to hold the space bar while choosing Print, or it won’t open. 2) Even then, the generic window for Printer Manages Colors comes up, not the PS Manages Color. 3) When I hit Print the P800 print window opens, sends data to the printer but then spits out blank paper.  Any help would be much appreciated.

I am trying to make a text follow a curved path that I draw with the Curvature Pen tool, but when I try to move the text through the curve it starts to disappear in the path in some parts and finally I can't fit it in the center part so to say. In the picture below I wrote "THIS IS MY TEXT" as example, and when I tried to move the text through the line, the word TEXT was gone. 

Hello, I have recently encountered an unusual issue with the Frame Tool in Photoshop. I’m working with a file that contains multiple groups and layers. At the top level, within a group I named "Intro Slide", I have three groups/folders : "2 Speakers," "3 Speakers," and "4 Speakers," each containing several layers. Within these layers are objects created using the Frame Tool. The problem occurs when I try to insert a new layer containing an image near where these Frame Tool objects are placed on the canvas. Upon committing to the transform, the image automatically embeds itself into the top layer containing one of the Frame Tool objects, even though these layers are both locked and hidden from the canvas. This behavior was initially difficult to diagnose because, after committing to the transform, the new layer would disappear. It wasn’t until I made each group and layer visible one at a time that I discovered the image had been embedded into one of the Frame To

Hi!I just updated to the latest Photoshop version (25.11.0), and my Legacy Healing Brush is creating jagged borders after brushing. This occurs when I'm working directly on the layer. If I try to use "current & below" on a blank layer, nothing happens—it's like I'm not brushing at all. This is happening with both large and low-resolution files.I have already reset the Healing Brush tool and my preferences. The standard Healing Brush works fine; this issue only occurs with the legacy version.Notes: This is happening in different files. All of them are set to 100% opacity and fill, with no holes in the layers, and all blend modes are set to "normal". The Healing Brush blend mode is also set to normal.I'm running Photoshop on an M1 MBP with macOS Ventura.Attached images for better understanding. for better understanding.  

O photosho aqui esta meio bugado, não inicia mais na tela de inicialização normal, inicial na tela baixo.Já desinstalei e reiantalei e nada.O que poço fazer? 

I'm trying to extend an image and when using the crop tool with the content aware box checked, it does nothing. I just used this tool yesterday with no problems. I'm assuming an update bug broke it. Any ideas??

Is it me, and I don't remember how Photoshop works, or is this new in version 25.12 Mac?  I wanted to blur the background and not the person in the foreground, but the blur filter is picking up on pixels OUTSIDE of the seleciton area (no Feathering! Feathering=0). I've done this thousands of times and do not remember the foreground outside of the slection area being picked up. I tired it on a basic image, ans you can see the gap between the selection area and the black field, and how the black field pixels are being picked up by the blur filter. This is driving me nuts!  

Best Ragards I recently did a clean install of my MAC OS Sonoma and made the DLfor my CC account. Launch photoshop and the HAND tool is selectedùand no matter what tool I clcick onno change. So no work. I tried a FORCE QUIT but no change. Once a RESTART changed it back to OK, but on close and restart no change. Tried switching Wacom One tablet with trackpad,no difference. Any help her blessedly received. MAC OS Sonoma 14.7Photoshop CC 25.12.0Apple MacBook Air 13 inch M2Wacom One small Bluetooth  

Hello, Photoshop 2024 crashes with access violation when try to export as GIF image. Please find the psd file as attached. Operating system is Windows 11 Enterprise 23H2. Best Regards ..

My photoshop tools are not working, my pointer instead is just acting as the hand tool. Anyone know how to fix this? I tried restarting the app and it worked earlier but isnt working anymore. 

Photoshop v 25.12.Win 11 Home 10.0.22635When invoked, Topaz Photo AI plugin opens and analyzes the image, then freezes and remains unresponsive to any mouse click. After reverting back to PS v 25.11., the plugin works normally as before.