Camera Raw

I recently bought a new camera – FujiFilm's X-S20. With my previous Nikon camera I used to drag the raw files into Photoshop and edit them in Camera Raw before exporting out jpegs. I've done the same with initial photos off my new camera and they are looking absolutely woeful.   I've attached two jpegs, one was processed in camera and the other has come via the raw. All I've done to make it is drag the raw file into Camera Raw, select the Provia/Standard camera profile, open the file in Photoshop, convert it to 8bit then save out a jpeg.   As you can see the images I'm getting from Camera Raw are blurry/lack sharpness. It's less apparent in this image but a lot of them have a strange glow to them. I'm using Camera Raw 16.0.1 with Photoshop 23.5.3 (2022).   Is there anything that can be done about this? Cheers.

Recentemente fiz a atualização do Ps, Camera Raw e etc.... Porém após essa atualização quando clico para abrir o camera raw, ele literamente trava e sou obrigado a forçar o fechamento do programa.  Após a atualização tbm qualquer imagem em alta qualidade que exporto para o PS ele trava e sou obrigado a fechar o programa pelo gerenciado de tarefas.  Na atulização antiga o CAMERA RAW funcionava peerfeitamente, como voltar ? o que fazer? uso Windows 

Estou enfrentando esse problema já faz um tempo, procurei soluções pelo fórum, pela internet a fora e ninguém conseguiu encontrar a solução. Simplesmente quando abro o CameraRaw, ele trava e me bloqueia de todas as tarefas. Unica coisa que aparece é uma barra de progresso que nunca carrega. isso está prejudicando meu trabalho! Nos ajude Adobe!

Pessoa, bom dia!Voltei minha versão do Photoshop para uma versão anterior a mais atual, pois meu notebook não tinha mais recursos para acessar o atual.Está rodando bem, porém não consigo acessar o Camera Row (requer aceleração do processador gráfico para editar fotos).Alguém sabe se consigo também retornar o Camera Row para uma versão anterior ou o que posso fazer para abrir?Já acessei 2 versões anteriores do Photoshop e não abriram mais o camera row.

Recently got a Canon R6 Mark II. Took some Raw images (CR3) and uploaded them to computer (Windows) via Bridge. Images do not appear in Bridge ... just icons ... and when I try to open them in Camera Raw (version 16.0), I can't: either the Open Camera Raw option is greyed out or I get the error message: "The Camera Raw settings could not be applied because there were no Camera Raw files selected or selected files were read-only". According to the file properties, they were not read-only and the Raw file(s) were definitely selected. Any ideas???

The following ACR keyboard shortcut page has out dated for new ACR UI. It has new and different panel order. On Windows, Ctrl + 1 ~ 9 are assigned. Geometry and Caliburation is out of the range (1-9) on current ACR Are Geometry and Calibration panel assigned to different keyboard shortcut?If no, it would be feature request to have shortcut key. https://helpx.adobe.com/camera-raw/using/default-keyboard-shortcuts.html     

So, 9 times out of 10 when I have used camera raw on a smart object, when I try to re-open it, it freezes on the progress bar and I have to force quit Photoshop. I lose all of the work I have been working on as well as the opportunity to save any of my camera raw settings.I searched through the Adobe threads, and there have been posts with the same issue as early as 2017, including one in which an Adobe employee replied, saying "you couldn't possibly be still having this problem six years later. You are mistaken." Well, I'm here to tell you, with much certainty, that Adobe has yet to address this problem and in fact, Igor me it's far worse than ever. If nine out of every 10 times I try to re-open camera raw it freezes everything then why am I using Photoshop at all? Forcing me to start over on an edit is absolutely unacceptable and if you aren't going to fix the problem then at least give us a workaround solution to at least be able to shut down Camera itself without having to clo

When I open open camera raw filter artboard/work area is completely blank. If I scroll down enough the image pops up but is very zoomed in. If I try to zoom out it drags the image off the screen. I can only scroll down to about half way through the image before it just stops scrolling. It is currently unusable because I can't even veiw my entire image.

Hi all, When I use Radial Gradient in Lightroom Classic, feather interections are visible inside and outside. See screenshot. But when I ue the same tool in Camera Raw there is now inside intersection, only outside. See screenshot. Is it possible to enable this somewhere in Camera Raw?  

Schon in der Version 16 gab es keine Möglichkeit, ein Bild in Photoshop aus dem Camera Raw zu öffnen, da es dafür einfach keine Buttons gibt.  Egal, wie ich das Bild unten erweitere, sehe ich die nicht. Sind die nun einfach woanders? 😄 Help. Kann das Bild weder in PS öffnen, noch schließen und muss Photoshop per Taskmanager zumachen.      

With macOS Sonoma 14.1, Photoshop 2014 (ps ver 25.1) and Camera Raw 16.0 in Full Screen Mode, the bottom part of the Panel space as marked below doesn't allow clicks or moving of the sliders in the Edit, Profile and Presets panels or any panel that the controls extend down into that area.  

So after literally 8 months of not being able to use the People masking feature, we got maybe 2 months of beautiful full usage and now I just installed the most recent oS update on my 2020 iMac and the masking tool in CameraRaw is COMPLETELY shutting down the program. I tested it in LRC and it happens there, too. I have restarted the program and the machine of course and still the same issue. Anyone else?2020 Retina 5K iMacProcessor 3.6 GHz 10-Core Intel Core i9Graphics AMD Radeon Pro 5700 8 GBMemory 32 GB 2667 MHz DDR4macOS Sonoma 14.2PS Version is 25.1.0ACR Version is 16.0.1.1683I cannot stress enough though that I successfully masked photos in the same gallery I am working on since I updated all Adobe products and it only because an issue with the oS update.

When opening a Canon CR2 file in Adobe Bridge 2024, Adobe Camera Raw 16 does not allow me to select Blue Primary in colour Calibration.  It gives an error sound and often closes the current screen.Green and Red Primary are both selectable and work fine.  Previous versions of ACR all worked ok.Seems to have occured when ACR16 was installed, Installing ealier verion of ACR cures problem. Mac M1 max, Sonama 14.1.  ACR16 silicon, Lightroom Classic 13.01 silicon, Photoshop 25.1 silicon Open BridgeRight click a CR2 imageSelect Open with Camera rawGo to CalibrationBlue sliders are not selectable.

Camera Raw version: 16.0.1 (also in older versions)SO version: Windows 11 23H2 To reproduce this issue and make it more obvious, do the following:- Open the RAW file attached- Rise sharpening to 70+- Open the AI noise reduction dialog and lower the ammount to the minimumExpected result: There should be more or less of the original noise depending on the ammount setting.Actual result: Noise reduction introduces a new artificial pixel pattern noise in the image, specially when the ammount of noise reduction set is low Please find here a RAW file for testing (gives and error when trying to upload here) and 2 screenshots showing the before and after applying the noise reduction.Without noise reduction (mouse button clicked):With noise reduction:  

I use Adobe Camera Raw to generate enhanced RAWs.After that, I use PhotoLab to apply DeepPrime and other settings on the generated DNG files by the Adobe Camera Raw.But I got a message in PhotoLab: Cannot load image data.PhotoLab Elite 7.0.2 Build 83Adobe Camera Raw 16.0.0.1677I contacted DxO support and after exchanging some messages they suggested that ACR has done something nasty with its generated DNGs and it is not PhotoLab fault.PhotoLab Elite 7.0.2 Build 83 is working fine with enhanced DNGs by ACR 15.5.0.I mention that I also use RawDigger from LibRaw LLC.RawDigger exhibited the same error trying to load enhanced DNG from ACR, but they fix it in the latest beta.So maybe there is something changed in the DNG format generated by ACR.Have you experienced any of the above issues?

Permissions error showing for SOME Cr2 files. Help 🙂   When any adjustment is made in Camera raw, and when you click done,  The error comes up.  Unable to  save he raw conversion settings,There was a write permissions error.While working on a network.This does not happen to all Cr2 files, which is really weird.Help please.

Has anyone experienced the the image on the screen going completly black when you move the slider? No matter how much I move the slider, +1, +10, whatever, I can no longer see the image on the screen. Photoshop and ACR are both up to date and it doesn't matter what camera (or camera brand for that matter) I'm using.

been using photoshop elements 2022 for awhile.  Like it. updated (a misnomer) to elements 2024, but can't get the raw plugin to show.  "installed" it twice, but still telling me I have to install it.

There's a problem/bug with ACR 15.4.1 (it's been a problem for a while now). When panning, THEN zooming with the option + scroll wheel, the image "moves." This is very annoying and distracting. This is not how Photoshop works. Attached is a video of the issue.

Hello averyone, i am not a young photographer but i do love my photoshop. My husband and i run side by side computer systems with every spec the same. We run  photoshop version CS5 on both systems. His can open his Camera raw 6.7 version without problem and see his Canon 5d Mk3 files in raw but mine does not...  when i try to update raw or bridge it comes up saying error n ot able to do for some reason. is there a way i can take the version of his Camera raw 6.7 and install it onto my sytstem? i do notice that my camera raw version is not the same as his... If not where can i get it from.. online is useless as all ADOBE want from me is my monthly subscription which i just do not have the money for. I already own CS5 which does everthing i need it to do beautifully,  thank you for your help to an old lady.. 🙂

Hallo,ich würde gern mehrere Roh-Dateien aus dem Programm Camera Raw gleich schon in einer Datei (PSD) öffnen oder speichern.Ist diese Funktion verfügbar oder muss ich das im Nachhinein über Skripten>Dateien in Stapel laden machen?Hintergrund: Zusammenbau mehrerer Belichtungsvarianten, Erstellung GIFs usw.Ich würde mir gern diesen Arbeitsschritt und damit Zeit sparen. Eine Aktion ist in dem Fall zwar möglich, das möchte ich aber umgehen. Vielleicht hat Adobe dafür ja inzwischen eine Lösung gefunden.Vielen Dank!

I created a Camera profile today using color checker camera calibration for my Sony. This creates a DCP file and placed it into Mac: /Library/Application Support/Adobe/CameraRaw/CameraProfiles. After restarting Adobe ACR and Photoshop the profile does not show up.I tried to import the profile manually but when trying to open the file it remains grayed out. Not able to select the file for import. Is there something i am doing wrong ?