FrameMaker

Installing FM19 took weeks, with lots of exchanges between our local IT support and Adobe: I felt it shouldn't have. Now I'm daringly trying to install the latest upgrade, and two things I remember from the original FM19 install are as bad as they ever were. Thing the first, the download speed is impossibly slow; after about fifteen minutes the progress bar shows around 6% and the promise '16 to 18 minutes to go' … and stays there. I cancelled after a couple of hours. Thing the second, an error message at the start about a conflict between FM and the Character Map application, when then app isn't even open. Solved this one by launching the upgrader, opening the app myself and closing the app again.Next move, ask local IT support to download the upgrader for me: but why should I need to do this?

This is at least an annoyance - because I'm not certain about the consequences:In the book window, with SHIFT held while selecting File I get options to Savel All files, open All files etc.I have noticed that just before the operation is performed, the selection of the book components is not complete:Fortunately it turns out that all book components had been saved (time stamp checked), although the last two are not selected in the book file. But the incomplete selection makes one suspicious.Klaus 

I've just upgraded to 2019 from 2012. I work in an environment whereAn author writes the first several drafts of a fiction manuscript in FrameMaker.Once done, the FM document is ported over into Microsoft Word so that the editing team and beta readers can collaborate during this process.Once this process is complete, the document is ported back in FM for typesetting and publishing.We're dealing with fiction manuscripts holding close to 300,000 words each. These are non-XML documents.In Microsoft Word, each chapter lives in its own section. We've upgraded to 2019 to leverage the import function that would allow us to bring a document from Word into Framemaker. From the preliminary exploration, the expanded import feature maps Word paragraph and character styles to FrameMaker's which is great. However, I do not believe that this import function can map each chapter in Word to a document included in the book.The alternatives would be to import the word document into FrameMaker andKeep it

[FYI, using the latest Frame2019 and Word 2016 (desktop)/Word365(online) ] Normal workflow:Author in Frame.Export to PDF.Markup for review (import, or replicate where necessary, unaddressed comments/questions from earlier PDF).Shared review.Update in Frame based on review comments.Back to step 2. Group of SMEs are (thankfully) willing to dive into large-scale revamping of very technical section of document (inherited from earlier development group and writer).HOWEVER... they insist on using Word so that they can edit (including large-scale addition, deletion, and moving of content) and comment. I've tried getting them to mark up in PDF and they're not going for it. I have no stick to wield 😞 So... this is how I did the adjusted workflow:Normal workflow:Author in Frame.Export to PDF.In Acrobat, Export to Word.Markup for review (Import, or replicate where necessary, unaddressed comments/questions from earlier PDF Word doc).[edit: Oh yes... the *really* fun part. So

When I download / Save As, a pdf file from Chrome or a website, and when I type in the file name, I get random letters and numbers when typing the name.  for example, I will type Test, but it comes out 4!#h, I just made up the 4 characters.I have no idea how to fix this.  As a work-around, once saved (with a bizarre name), I go to the file and Rename.I'm using Adobe Reader DC

I am working in DITA 1.3.  How do I change the font size in the title of the  DITA 1.3 Task?

Ladies & Gents,I see some older posts on fonts and I'm looking for some updated guidance!Are there better/cheaper subsitutions for Dapf Zingbats & Helvetica fonts or should I purchase? What do you professionals use when you need to use special charactors like a pointy finger, airplane symbols, or arrows ➣ ?I'm just looking for some tips from the pros!Thank you!Sam

We've recently upgraded to MF2019 (64-bit) from FM2017. Whenever we open a FM2017 document in FM2019, none of the graphics are displayed. We are on v 15.0.5.383 (our IT is yet to install Update 6).All graphics are added by referenced using a mapped drive.

Friends,When discribing features of FM, I have the habit to test it after describing how it (schoul) work. As an engineer I often do not trust the written information - hence I stumble over faults, which probably have been introduced after the feature was first introduced.This happens again with the feature "Associate template with a book-folder".I  have filed bug report FRMAKER-8923 stating:Problem Description:Book folder-template: function is brokenSteps to Reproduce:- Use the files in the attached ZIP to verify:- Open example.book and check:Actual Result:- The folder name is appended with the path of the template- The text inserted by variable Chapter Title Name is not the folder name (Appendix) but the template file name (folder-template.fm)Expected Result:According to help the variable <$chaptertitlename> contains the name of the folder (Appendix).In the bug-base I have added a ZIP with the example book. I have no desire to create a MIF of all files and then test t

Friends,I have absolutely no success publishing anything but PDF via the publish panel (and  simple HTML via Save as HTML):Trying to create (with default settings) Basic HTML, MS HTML Help, EPub or Responsive HTML5 I get a progress dialogue, which disappears after about 5 seconds and FM quits. In the temp folder I find an 'extended' copy of the sts file (which de facto is a ZIP) as a folder. Every attempt creates such a folder.Trying Kindle I get the message "KindeGen executable was not found...". On OK I get a link "Go to KindeGen Download Page" - which does not exist. I get error 404 in the browser.Each attempt leaves the *.lck file and I have now restarted FM multiple times, also with fresch %appdata%.Even Windows restart does not help.Since ZIP can not be attached here (shame!) helpful souls need to rename the attached xxx.zip.bmp to xxx.zip for tests.Kruzitürken, der attach geht auch nicht → https://daube.ch/zz_tests/Open-Issues.zip

The name says it all. Any way I can stop using the Task Manager to manage Framemaker?

I am trying to create a document that follows 11.11.1.122.12.1.1H:Module: <$chapnum>< =0>< =0>< =0>< =0>< =0> (Using this number format )for the main content in the book (This is working and works exactly as needed)Then for appendices, I would like to use letters for each appendix section ABCI have it set to number as suchG:Appendix: <A+> -< =0>< =0>< =0>< =0>< =0> (mimics the chapter numbering)With this each new appendix section starts at A instead of A, B, C etc. How can I manipulate the format so that it numbers as desired? The overall numbering/ TOC would follow:Ch 1, Ch2,...Ch 10, Appendix A, Appendix B, Appendix CThank you for any assistance

Hi Everyone, I need some help. I have a file that I am placing into one folder but it is attached to another folder. Trying to research it how to fix, it says to change the directory for the template by customizing the marker.ini settings. I do not know where to find this.  Here is what I am seeing.   How do I change/fix this?   Thanks,  Eddie66  

I have the 2019 release of FrameMaker, updated to the latest version, my colleagues have the 2015 version of the software. I saved the files in the mif 7.0 format, so that their program can read it, but when they open the documents, FM does not display or recognize a bunch of characters (accented letters, ñ, bullet points, etc.) even though they are in the same language and font. The only way we have found to resolve the issue has been to search and replace all the characters that were not recognized (as they were replaced by a "?" character), because it was an urgent matter, but I'm hoping to solve it for good.Attached are a screeshot of the error, and a screenshot of the problem in the opened file by the earlier version of the program.

Is it possible  to display an alert only once in the for loop? for (var i = 0; i < oMarkers.length; i++) { if (oMarkers[i].obj.MarkerTypeId.Name == "Index") { alert ("text already present"); bMarkerExists = true; break; } }   

After going through both the Structure Application Developer's and Application Developer's Reference guides I still don't seem to get how can I export xml with colspec attributes set. The context: I'm working with DocBook so tgroup is the equivalent of the TABLE element. The DTD specifies that a tgroup may have zero-or-more colspec child elements. FrameMaker doesn't allow me to add those elements, but when it exports it adds the exact number of colspec elements as there are columns. That's awesome! My problem is that the resulting xml has colspec with no attributes set. And, as a side-effect, straddling isn't exported properly.For example, this is what FM exports <table frame="all"> <title>yadayada</title> <tgroup cols="12"> <colspec/> <colspec/> <colspec/> <colspec/> <colspec/> <colspec/> <colspec/> <colspec/> <colspec/> <colspec/> <colspec/> <colspec/> <tbody> &lt

How do I get a System Variable <paratext[head_1,head_2]> set up for the page header to pick up the last PREVIOUS page head_1 or head_2 rather than the one that appears further down the page on which the header appears? It's a bit misleading to the have the page header not match the top-of-page text that appears under it from the previous section, but have it be the title of the next secion that appears further down that page. Your help appreciated.

My running header uses Heading2 paragraph text. Occasionally I have to force the Heading2 paragraph to the next page using a Heading2_Top_of_Page paragraph tag with a top of page pagination instead of a manual page break. I need to have the Heading2_Top_of_page represented  in the running header as well (either Heading2 or Heading2_Top_of_Page) but not both. Is there a way to use both Heading2 and Heading2_Top_of_Page in the same variable in the same chapter but only have one or the other show when it is appropriate?  FrameMaker 2019 UnstructuredThanks,Robert

I have a pdf of a figure that is over 300 dpi (which is what I need) and when I import it to Framemaker 2019  then pdf it and run a preflight it does not pass the 300 dpi test.  How can I fix this?   

I am trying to do the following using the codes already available on this forum: 1. find marker type Index and marker text goto if 1 is true then it should exitif 1 is not true then it should move forward and create new markersFollowing is the function: var regex, marker1; regex = "goto"; function setMarker(doc, pgf) { var bMarkerExists = false; while (marker1.ObjectValid () === 1) { bMarkerExists = false; // Make sure it is an Hypertext marker. if (marker1.MarkerTypeId.Name === "Index") { // Check the text. if (regex.test (marker1.MarkerText) === true) { alert ("markers already present"); bMarkerExists = true; break; } } marker1 = marker1.NextMarkerInDoc; if (!bMarkerExists) { if (pgf.Name == target1.Name) { createMarker (doc, pgf, 4, "Index", "goto" + getText(pgf)); } else if (pgf.Name == target2.Name) { createMarker (doc, pgf, 4, "Index", "goto" + getText(pgf)); } } pgf = pgf.NextPgfIn

Here is a link to the article:https://threatpost.com/adobe-warns-critical-flaws-flash-player-framemaker/156417/

Fine-tuning a template (FM19) to deliver CorpComm's latest idea of styling.open documentopen Table catalogopen table style definitionchange setting for header and footer colour from corpLightBlue to corpSecondaryGreyclick [Update style]close Table catalogSeems simple and straightforward, doesn't it? but then …open table style definition and discover that header and footer colour is stubbornly at corpLightBlueAny ideas?

I want to delete all the Index markers in a framemaker document that are starting with text Part No.Is this possible with Framemaker scripting?

GooddayI'm runnig a old FM version 7.2b144 (Microsoft windows xp)  and I have many files .fm from it. I'd like to buy the new relaise 2019  but i'm not shure thet it will possible to open them and continue to work on that files. Can you help me? Athos

Hi, I'm using Framemaker 2017 and Acrobat 2017. Since end of May 2020, Print to file command to export a .ps takes extremely long time (seven minutes for a one-page .fm document, guess for a book). I reinstalled both Framemaker and Acrobat, and reinstalled the PDF printer with different Adobe PDF Converters, but with no success. My system is Windows 10 Enterprise version 1909 build  18363.836. My manager is using the same tools and versions but has a different OS build. Hope someone here can help. Thanks in advanceAbdel