Lightroom Classic

i have a folder with a subfolder named MLS. when i exported images to it, i mistakenly entered “mls” (i.e. lower case. LrC dutifully created a subfolder labelled mls, and it now shows two subfolders: MLS and mls. i tried to move the image from the latter to the former but LrC wouldn’t do itWindows File Explorer only shows one subfolder: MLS, with all the images

I have a book of multiple pages, and I need 10 pages to change place to another book. The only way I found so far to do this is to export the whole book to pdf, and put 10 pdf pages to the other book. But the problem is, you cannot change anything anymore (as it is a pdf and not the different photos). Is there a way to drag whole pages  from one book to the other, so if you would drag them, the photo’s and the layout on the page go as well to the new book? 

The only solution i have found is to open the photo first in another module, then go back to the book module, then add the photo in the book. But this takes extra time. 

I have a 5TB image folder on one external HHD. (Catalogues are on my internal SSD) The drive is showing signs of possible failure so I have split the images onto two external SSD for safety. (Also backed up twice) I used the same naming structure for the nested folder. Combined they have all the folder/images of the orginal drive. Is there a way to point the catalogue to these two different drives?Drive A (failing) Images_africa_32 nested foldersDrive B  Images_africa_12 of the 32 foldersDrive C Images_africa_20 of the foldersIn the Lightroom panel, if I choose the 12 folders on drive A that match Drive B and do Update location. And then chose the 20 and update location to drive C, will this work? Can it point to the two drives? I tested one folder and it seems to work, but before I do everything, I just wanted to see if I was handling this correctly?Any assistance would be very welcome. ThanksNancie   

When Soft Proofing viewing the monitor gamut warning just change the entire display area to red. Note this also happened in 15.3. Destination gamut warning works correctly.Windows 15.3.1 release, everything up to date. 

I purchased my sony a7V in February 2026 but the raw files are still not supported by LR classic. I was on the phone with your support twice this week. Although I’ve read online that LR classic now supports these files,  a supervisor from Adobe told me yesterday that it is not so.  Please get this update for us  asap - us Sony users feel left behind. I have 2000 photos not supported by LR and had to go back to using my A7iii until you update. thank you

When clicking on the Remove Section before it would automatically open all the Remove tab (as there wasn't a Distraction Removal tab) however now it's automatically closed and just means having to click on the Remove tab. I much prefered it before, as now it just means 1 more extra click! As there's only 2 sections in the Remove tab then it may as well just have both open.

Hi all,I work with large sets of photos in Lightroom Classic and always found metadata (titles, captions, keywords) to be the most time-consuming part. Recently I have been experimenting with a small plug-in I built that uses AI to help generate this information and write it directly into the IPTC fields in LrC.It is still simple, but for stock photography and bigger projects it has saved me time. I am sharing in case others here are exploring similar workflows, and I would be interested to hear how you handle metadata automation in your own setups.If you are curious, I put a short description and the download info here:https://www.metamagicplugin.com/Mods: if this type of post is not appropriate, please feel free to remove.

Lo he cerrado varias veces para el reset y asi y todo se va en fallo el programa y no puedo trabajar en el 

After I used the available colors in the refresh, I pressed sync for other photos, and my app stopped working, but my computer continued to use other apps simultaneously as normal.

This issue is really affecting my editing workflow.  As I scrolling (right/left) through images on the strip to edit, intermittently the selected photo is not showing on the main editing screen. Somehow it get stuck on the previous photo.  See sample on the photo.  I’ve changed all the preferences to the most efficient and highest performance.  I’m at a total loss… and about to pull my hair out.  I’ve gone to the extreme to update to a high end Windows workstation.  Can someone help me with this issue?The editing photo does not correspond to the selected image for editingLRC 15.3  RAW 18.3Windows 11Intel Ultra 9 285k  32GB memGeforce RTX 5070TiM.2 SSD 1TB  OS, LR catalogs &cacheM.2 SSD 2TB  Photo RAW files

I don't put all the photos i selected in the final book.I would like to be able to select only the used ones, so i can edit only those.Thank you. 

Would it be possible to adjust the text layout for multiple pages at once? If you don't use the standard layout you have to adjust it page by page and frame by frame... 

I'm in Library, Loupe View. I use my arrows on the keyboard left and right to scroll through pictures. Then I hold either key of a couple of seconds and when I release it, the pictures should stop scrolling. However it continues scrolling and very quickly. There is no way to stop it, clicking or escape won't work. Just switching to another program and coming back. This is very annoying as I can't scroll quickly through my pictures. I get very frustrated.  Lightroom Classic 15.0.1Mac OS Tahoe 26.1

Beim Export von Videos aus Ligthroom Version 15.3 auf Windows 11 wird nicht das Exportdatum mit Uhrzeit als Aufnahmedatum gesetzt.Dies führt bei Folgeanwendungen zu fehlerhafter Sortierung.

DescriptionThe menu action "Library" → "Convert photo to DNG..." removes the original raw file but does not remove the associated xmp file.Lightroom Classic version number15.3OS Version NumbermacOS Tahoe 26.5Camera ModelSony ILCE-7RM4, firmware V1.20Step-by-step Reproduction InstructionsImport raw files from camera with option "Copy" Select all imported raw files Use menu item "Library" → "Convert photo to DNG..." The Expected ResultInspect the folder where the raw files were located. It should show the DNG files.The Actual ResultInspect the folder where the raw files were located. It shows the DNG files and also the xmp files that were associated with the now deleted raw files. 

Hi, i have trying to use denoise on my sony arw raw files. they are true raw files but but i cannot denoise them. it keeps coming up with an error message. the error message says failed to apply adjustments to following images. i have a macbook pro m3 pro on macintosh tahoe 26.1 and i have no option to use my gpu acceleration on anything. it says system is incompatible which kind of makes no sense to me as the gpu is fairly powerful

Ich habe ein ungewöhnliches Problem in Lightroom Classic.Ich erstelle einen neuen Katalog und importiere einen Ordner mit Bildern. Im Importfenster werden alle Fotos korrekt angezeigt, und ich kann die Vorschaubilder ganz normal sehen.Sobald ich jedoch auf „Importieren“ klicke, verschwinden die Vorschaubilder in der Bibliotheksansicht. An ihrer Stelle werden nur noch graue Kästchen angezeigt.Die Bilder selbst sind jedoch vorhanden:Die Metadaten werden korrekt angezeigt. Im Entwickeln-Modul werden die Fotos normal angezeigt und können problemlos bearbeitet werden. Die Dateien befinden sich weiterhin am richtigen Speicherort und sind auch im Finder sichtbar.Folgende Punkte habe ich bereits überprüft:Es sind keine Filter aktiv. Es gibt keine Dubletten. Der Ordner ist klein und enthält nur wenige Bilder. Das Problem tritt sofort nach dem Import auf.Es scheint, als würden die Bilder korrekt importiert, jedoch werden die Vorschaubilder in der Bibliotheks-Rasteransicht nicht angezeigt.Können

The application will show in the task manager as a background task, but will not pull up the application window. I have tried updating the app, rebooting the pc and running offline. All with no success 

I'm going to be getting some images in the FITS format. I keep trying to ask Adobe if they have or could recommend a converter, and got nowhere.  Suggestions appreciated. John

lors de l’utilisation de LRC, si les paramètres perfomance utiliser un processeur graphique est activé avec la dernier version des pilotes NVidia : GEForce 610.47 May 26 2026 , l’application plante aléatoirement sans message d’erreur. Sur mon utilisation c’est plutôt dans le module développement que cela ce produit.j’ai désactivé son utilisation et pour l’instant ça fait 3h que LRC n’a pas planté. version LRC : version 15.3Caméra Raw 18.3

When trying to remove something from an image it leaves a white shadow of what was meant to be removed.

I usually create a folder for my images on the hard drive by dragging and dropping from the SD card. Then I open Lightroom and point to that particular folder.

I have built a computer in the past year and have struggled getting the subject and background masking features to work. MY graphics drivers are up to date. I have read that AMD and adobe have had problems in the past and am curious if that is the issue now. I have a Radeon RX 6950 XT GPU Here’s the info I pulled from LRCLightroom Classic version: 15.3 [ 202604090947-8f3672ed ]License: Creative CloudLanguage setting: enOperating system: Windows 11 - Business EditionVersion: 11.0.26200Application architecture: x64System architecture: x64Logical processor count: 12Processor speed: 4.6GHzSqLite Version: 3.36.0Adobe GSDK Version: 1.4.0.213CPU Utilisation: 1.0%Power Source: Plugged InBuilt-in memory: 64631.9 MBDedicated GPU memory used by Lightroom: 3779.6MB / 16337.2MB (23%)Real memory available to Lightroom: 64631.9 MBReal memory used by Lightroom: 4644.2 MB (7.1%)Virtual memory used by Lightroom: 8897.8 MBGDI objects count: 1013USER objects count: 3779Process handles count: 2992Memory ca

Beim Versuch, Fotos in Lightroom Classic zu importieren wurden beim ersten Mal die Vorschaubilder angezeigt und der Fortschrittbalken oben links wurde angezeigt. Der Balken zeigte aber keinen Fortschritt und das Programm fror ein. Bei den nächsten Versuchen wurden auch die Vorschaubilder nicht mehr gezeigt. Ich kopierte dann die Fotos in ein Verzeichnis meiner externen Festplatte und versuchte, die Fotos nicht zu kopieren sondern nur am aktuellen Speicherort zu importieren. Auch das geht nicht.