Photoshop

Hello Adobe Photoshop Team,I would like to report a long-standing issue that has affected Photoshop for several years.Issue DescriptionThe problem occurs when working with a duplicated image layer.Steps to ReproduceOpen an image in Photoshop. Duplicate the image layer. Select the duplicated layer. Apply one or more of the following commands: Image → Auto Tone Image → Auto Color Image → Auto Contrast Verify that the color correction has been applied successfully. Perform another operation on the same duplicated layer, such as: Straightening the image. Scaling or transforming the layer. Expected BehaviorThe Auto Tone, Auto Color, or Auto Contrast adjustments should remain applied after any transform or straightening operation performed on the same layer.Actual BehaviorAs soon as the duplicated layer is straightened, scaled, or transformed, the image unexpectedly reverts to its original colors. The Auto adjustments are lost, as though they had never been applied, while the transform i

I have a JPG that I’m slicing up for email html. When I save for web it only saved one slice as my selected JPG output format, the other slices saved as PNG.I’ve tried selecting all slices before save for web. I’ve tried selecting all slices in the save for web window. Nothing seems to enforce my intended output format of JPG.Also, I have no idea why it’s choosing PNG. This image started life as a JPG. There is no transparency at all. This issue has been plaguing me for months!here’s an old post on the subject... 

As the title says, when I attempt to draw in Photoshop, my brush lags significantly in a way that is impossible to work with. When moving the pen around at an average speed, the line appears behind it in short bursts with a few seconds between. This began about a week ago although I had not opened Photoshop for a while beforehand. This is only happening with Photoshop and only with my Cintiq. There is no lag when using the Cintiq with another drawing software, and no lag when using my older Intuos with Photoshop. I draw with fairly simple brushes on lower resolution canvases.My specs:Laptop- MSI GS65 Stealth 9SEOS- Windows 11Tablet- Wacom Cintiq Pro 24 PGraphics Card: NVIDIA GeForce RTX 2060CPU: Intel i7 The main things I have tried since the problem began:- Updated Photoshop from 2024 to 2025- Updated Wacom driver- Updated NVIDIA driver- Made sure GeForce overlay was turned off- Made sure Photoshop was still set to use the NVIDIA card- Made sure I had a decent amount of free

my Adobe photoshop web is not working. When I drag and drop a photo it says "we couldn't open your document. Please try reloading the page or signing into another account" I've tried reloading a bunch of times, I have no other account. My video card drivers are up to date, and all the other stuff suggested online. Please help

I have a MAC operating system. During the previous Photoshop update, I canceled the update after five hours of updating. As a result, the entire program was removed from my computer, which means that I lost all actions and Brush tools. Of course, I spent several hours reinstalling the brush tools and actions. The whole thing happened again during the last update. I contacted Adobe for help. An Adobe employee connected to my computer, found no errors, but unfortunately the issue happened again when he canceled the update and everything had to be reinstalled. Does anyone else have similar problems? If anyone has, how did they solve them, if that was even possible. In all likelihood, Adobe has problems, and then we customers are wasting hours trying to get the program back or upgrade it with all actions, Brush tool.Branko Teršek

The border overlaps onto the image and makes it darker. What setting is causing this? It occurs whether I do the sky replacement completely in Ps or if I start the image processing in Lr and use the “edit in photoshop” feature. It does not happen to the same images used in On1 sky replacement so Photoshop is the chief suspect. The sky in the examples shown below was made smaller so the border was visible to illustrate the problem.Thanks in advance to anyone who can point me in the right direction. I’m out of ideas for where else to look for the cause.Bottom of sky imageTop of sky image

After a recent update, I can no longer permanently turn off “Show Extras” and layer/selection edges. I don’t want any edges, bounding boxes, etc showing. How can I turn these off globally and permanently like I could before? When I close all files, those options under View are greyed out.

Yesterday morning it was working just fine at first, but by about the 10th photo I was editing, the Selection Brush’s add more setting stopped functioning. It performs like the add less. The add less works correctly. I cleared my browser cache, restarted my browser, tried a different browser, restarted my computer, and none of those helped. I asked the built in AI and they advised trying in an incognito window incase it was a plug-in interfering. Still no difference. I tried a different image, thinking maybe that was the issue. No change. The AI said that it is most likely a bug on your end, so here we are. Note: No, I do not have the ability to install the desktop version on this particular PC.

Issue:  Photoshop version: 26.10.0 20250811.r.7 x64 (final, Release) OS: Windows 11 64-bit (10.0.26100.4946), 4070 RTX (mobile), i7-13700h, Windows HDR enabled Steps to reproduce: Create a new 1000 x 1000 px document., RGB, 8 bit. In [Edit > Color Settings...] enable "Blend RGB colors using gamma 1.00". Enable [Settings > Technology Previews > Precise color management for HDR display], butit seems to be irrelevant (that's the only other setting I changed since Photoshop installation). Create 200 x 200 px, #00f blue raster square with 50% opacity ("Normal" blend). Ctrl + J to duplicate this layer. Group them. Fill bg to say #eee. Notice that the color they have is #6767f8 (correct I assume). Move the group with the Move Tool (V) and notice the color changed to #7f7ffb. Use zoom/pan (Z) and notice it flickered back to #6767f8. It's even possible to duplicate this group and fix both copies by the zoom tooland then drag only one of these groups with Move Tool (V)

All of a sudden, when I open any image in Photoshop, the colors appear to be desaturated...In Photoshop only. When I open that same image in Window Picture Viewer, or Quicktimer, or even if I drag the image into a brower window, the colors appear fine. But in Photoshop, something is clearly wrong. Now, I can make color adjustments to the image, but when I save and reopen reopen it in another application, I can see that color changes have been made, but they still don't match what Photoshop is displaying.The images are RGB image...I've checked the color space setings in Photoshop, and they are the default (Edit > Color Settings: North American General Purpose 2 / RGB: sRGB IEC61966-2.1 / CMYK: US Web Coated (SWOP) V2, etc, etc). I also made sure View > Proof Setup was set to: Working CMYK. I even reset Photoshop to it's default settings (by holding down CTRL-ALT-SHIFT on launching Photoshop)...But the images still appear desaturated when I open them in Photoshop...So, I don't unde

Photoshop closes by itself about 10 minutes after startup without displaying any error message.I have reinstalled it several times already, but the problem still persists. System info:Adobe Photoshop Version: 27.0.0 20251015.r.25 d1c1320  x64 (final, Release)Number of Launches: 19Operating System: Windows 11 64-bitVersion: 11 or greater 10.0.26200.8875System architecture: Intel CPU Family:6, Model:7, Stepping:2, AVX2, AVX-VNNI, HyperThreadingPhysical processor count: 6Logical processor count: 12Processor speed: 2496 MHzBuilt-in memory: 32578 MBFree memory: 20883 MBMemory available to Photoshop: 25038 MBMemory used by Photoshop: 70 %Crash Handler: AdobeDCX Version: 9.11.1SAM SDK Version: 14.3.4ACP.local Status: - SDK Version: 5.8.2 - Core Sync Status: Unknown - Core Sync Running: Unavailable - Min Core Sync Required: 4.3.4.2Live Edit Client SDK Version: v5.3.2Adobe Firefly: Please use any generative AI feature to view the latest version.OpenColorIO version: 2.4.2Content Credentials is n

In the Canvas Size dialog, with “Relative to current dimension” checked, the width nor height can be set to 0. This is a big problem if you only want to change one dimension.Also, I will say that it is very annoying that the up and down arrow keys no longer increase and decrease the value by a whole number.

Hi everyone,Photoshop 2026 (v27.4) on Windows gives me this error constantly when work with curves (i didn't try other tools, so i hope this is the only one): "Impossible to update advanced objects because a program error has occurred (f376f9.749)".Sorry, my Photoshop is in Italian.Anyone else seeing f376f9.749 on Windows lately?Thanks in advance!   

The bounding box of the transform tool is in the wrong location and not properly scaled when used on warped text. It does snap back to correct scale and location when a corner of it is selected but reverts once the transform is deselected again.Photoshop version is 27.5Off center and wrong scale bounding box on warped text 

Really annoying bug. I spend 10 minutes going through my list of fonts in Photoshop, clicking the star next to fonts I want to remember as "favorites". Many of these fonts are installed via fonts.adobe.com. But Photoshop keeps turning off the "favorite" star for many (but not all) of my font selections. I think I've figured out the cause: If I start Photoshop shortly after logging in, before the Adobe Creative Cloud magic has had time to activate all my fonts, the fonts that are not yet activated don't exist yet (as far as Photoshop is concerned), and they lose their "favorite" star. Once the star is turned off by this bug, it stays off until I go back into Photoshop (after the fonts have all been loaded) and turn the star back on again.

Issue summary: A smart object produces unexpected behaviour when dragging a smart object with polar coordinates applied to a new document depending on where you drop it off on the canvas. Product and version: 27.8.0 Operating system: Windows 11 Steps to reproduce:  1. Create a square document 2. create a gradient (or any other content) and turn it into a smart object 3. Apply the polar coordinates filter 4. drag and drop the smart object to a new document 5. depending on where you let go with your mouse on the canvas, the filter outputs different results Expected result: same output as the document the object was copied from Actual result: result depends on placement on canvas, which can’t be changed by repositioning the smart object. double-clicking the smart object also does not help. it seems like the polar coordinates filter is stuck to the coordinates where you let the mouse go. Attachments (optional): https://youtu.be/sEZB6t0sIW4