Premiere Elements

I release basic visualisers for music on youtube and instagram, and feel like my instagram videos would benefit from having a mobile aspect ratio. the visualizers don't have any important information outside of the centre, so I want to crop them out, leaving only the centre of the video, and changing the frame so there won't be black bars on either side after i export - how do i go about this? 

I am using PRE 2019 on a Windows 10 computer.When I highlight a particular audio clip it says "Rubberband:volume:bypass" and the yellow line representing the volume level is much lower than in adjacent clips which say "Rubberband:volume:level".  All the other clips are like this - only one has "bypass".  I have tried changing the setting to "level" but when I close the project and re-open it it reverts to "bypass".  Could you please explain what this means and why it is happening?  How can I permanently change it to level? 

I just upgraded to the latest version of Adobe Premiere elements 19.0 and the rendering is blurry.  The video have been inconsistently blurry and I can't seem to figure out the cause. I am capturing video using a Hero8 GoPro in 2.7k with 60 fps and I seem unable to render it to 1080p in Adobe Premiere Elements.  Any help would be greatly appreciated.  Original files. Export settings  

April 2021.  I prepare music videos for posting on YouTube.  They include jpeg photos of scenes and people and TIFFs of sheet music. The Tiffs are exported from Sibelius music notation software.  The quality of the Tiffs used to be very good but suddenly the quality of the TIFFs is very poor both on screen within Adobe and when exported to YouTube.  I have used the best quality Tiffs and tried converting them to Pngs and Jpegs; I also render the video before posting.  Nothing I do improves the quality.  I am on PC Windows 10 64 bit.  An example of good quality music pages Tiff: https://www.youtube.com/watch?v=r1z7xR0pgds&t=182s An example of poor quality: https://www.youtube.com/watch?v=wb4o5EL3tMoWhat is going wrong?  This just suddenly started happening, has there been an upgrade?  The virtual assistant is no help, it thinks I haven’t got a product registered but it is there in my account.  Someone please help/

I am running Premiere Elements 12.1 on an iMac running Mojave 10.14.6 with 25 GB of available storage. I have a project that is 1 avi file of 15.5 GB, with a duration of 1 hour and 5 minutes.  It plays fine in elements. I am receiveing the following at the 98% mark of a "Burn in Progress" attempt:unknown error: 2130852354 Anyone have any thoughts?   Thanks for any sugestions. Rick   

Hi,Something weird just happened to my Premiere 2020. Pls see attached images. Every clip is automatically inserted on the same timeline with repeating audio - A1, A, A3 ... A6 - as you can see in the picture.  Also, right click to "insert to timeline" on a video clip gives 4 duplicate copies. I uninstalled/installed the program but it didn't correct anything. What can I do to correct this? Thank you so muchTs 

Im nots ure im in the correct forum or place to ask this but after have talked to costumer support in chat and got the most un-helpfull support and i cant find an email to Adobe to ask i turn to you and see if you can help me.Ok first of im totaly new to film editing in any form, its only for privat/friends use not commercial.Last year (2018) i searched for an easy to use and reasonable priced program to edit my gopro and mobile films, many people suggested  Adobe Premiere Elements 2018 version, so i bought it.In the new year this year i reinstalled my PC and untill now dident need to edit things so i looked at my account to re-download it again and install it.But in my account i can not fint that specific program anywhere? the only thing i found was Adobe Rush that seemed to me be some sort of replacement or name change, so i could download it and tried for s small bit and it seemed to work.Cue yesterday, and i chat with support to help me undersnat what i am missing,Where is Ele

looking to upgrade but I want to make sure 2021 can handle 4k at 60fps in the HEVC/H.265 codec.  I really would like to keep the same editor I have been using and also not have to convert every video file to be able to edit it.let me knowthanks in advanceRobert

Hi there,I installed Premiere Elements 14 on my new laptop and when I tried to start it, the message showed as you can see in the screenshot - too many licenses in use. I deinstalled Premiere on my old laptop, but still the same. Then I found out, that I have to deactivate / sign out and not (only) to deinstall the old Premiere. So I installed it again on my old laptop, chose there Help > Sign out.But different than expected: Both laptops show this message now.Can me help somebody here?I didn't finde any other tips and am really helpless now 😕😕 

I have a trial version of Premiere Elements 2021 and want to clean up a grainy video. The help video says to go to FX find reduce noise and drag to video. I can't find reduce noise, is this available on the trial download?

Hello,Running Premier Elements 2018 on my Win10 (Home) PC, I normally run my sound to my external Presonus AudioBox22VSL audio interface. I do this for all programs I am running. That is, from the system audio output choice, I switch from the default "Realtech(R) Audio" output to "AudioBox 22VSA" setting.   This works fine for all applicatons on my PC except for Premier Elements 2018, which reverses the speaker output choices. That is, in order to get the sound output to channel to my audio interface, I must select the default PC speakers (Realtech Audio). If the setting is set to the audio interface (AudioBox 22VSA) setting, the sound will come out of my default PC speakers. So I must change the speaker setting to be the internal "Realtech Audio" setting that will (strangely) send the audio output to the desired external audio interface instead.Sure, this "workaround" works but it's a real pain in the backside. I often jump back and forth between my DAW (Digital Audio Workstation

Hi! I was wondering if anyone here can help me. I have noticed at problem, when I'm going to download my project. It creates a boarder or frame around it, so it doesn't show full screen...or full frame. Don't know how to explain it otherwise. This boarder/frame can been no matter what I do. I have tried to edit my video preferences, pixel and...well, all the logic things I could think of. It still does not show full frame or screen - which ever term is correct, and it's driving me crazy!Before and after editing. I have done nothing but edited it a bit.⬆This is how it shows on Facebook.As far as I know, the videos for my projects are recorded in HD. Please, can someone tell me what to do??Kind regards,Gitte, Denmark

I'm struggling to make Timeline Markers useful to me. Problem 1: after adding some timeline markers to flag places where I want to go back in and add titles, special effects, etc., I stretched a clip at the beginning of the timeline. NONE of the succeeding markers shifted by the amount of time I added. Is this how these are supposed to work? So, if I delete or add a clip, stretch a clip, whatever, all my previous timeline markers later in the timeline now point somewhere I don't want them to? This makes sense why? Luckily, sorta, PrE crashed while I was still trying to adjust all of these mangled markers so I lost all the bad locations. (And some effects I'd created that were part of the stretch and stuff that screwed them all up. Sigh.) Question 2: There is a "Duration" showing in the Timeline Marker dialog box and the Adobe Help topics suggest this can be adjusted (what? nothing shows there besides the word "Duration"...) to create a marker that runs over multiple frames. H

how to get the images back?

bonjour,quand j'archive un projet, je ne retrouve pas pour pouvoir ouvrir si je veux ouvrir par l'archivagemerci 

I'm creating a photo slideshow for my daughters 8th grade class in the classic version of Primere elements 2021 where you add each photo and transitions in between.  I cannot for the life of me figure out how to make the photos pan and zoom (especially the vertically oreinted photos)  Is there an automatic application for this like it would automatically do when you let the program create the slideshow?   Admittedly its the first time I've used the program and fairly green to using it.  Any help appreciated.  Links to tutorials or instructions.

Adobe says that: "Premiere Elements 2019 automatically synchronizes the audio with videos that have VFR footage"(https://helpx.adobe.com/ca/premiere-elements/using/adding-media-premiere-elements.html) However Premiere Elements 2020 fails to sync audio with vareiable frame rate video.  I just spent over an hour with tech support who confirmed this is the case and instructed me to use free third party software Handbrake to first convert (= resample = degrade) my video to contant frame rate before bringing it into Adobe. Why does Adobe: 1.  Make film editing software in 2020 that can't handle the ubiqitous VFR video format?2.  Charge money for software that requires free third party software to work?3.  Falsely advertise the capabilities of its software?  

I downloaded Premiere Elements for a trial version and importing MP4 files worked fine. I purchased a code and activated. Now when I import MP4's they appear fine in the timeline but in the workspace the color layers don't line up. It appears as unaligned purple and green images. When exported as MP4, they look like the the workspace version. These files open just fine in Media Player, Windows Movies and VLC Video Player. I even tried recoding with Handbrake. I spent 45 minutes with a chat advisor who seemed fixed on a driver problem and got nowhere. Pretty sure it's not a driver issue. Any help is appreciated.  

I have used a MovieMaker Pro device to scan Super8 cine movies into 1440x1080 video files in 4:3 aspect ratio. In Adobe Elements I found that when I create a new project to edit these videos I have to select "PAL->Hard Disk->Standard 48Khz". This is because this is the only project with a 4:3 aspect ratio. The preview window is the correct aspect ratio (4:3) and when I add my media it correctly fills the entire preview window (see the attached "standard" image). I then export the video using a custom format which gives me a 1440x1080 video. This all works but what I want to know is when I add the media to the project does it scale it down to the 720x576 frame size of the project? Am I losing information at this step even if I finally export it at the original frame size of 1440x1080? I have tried selecting other projects with 1440x1080 as the frame size (see the attached "Widescreen" image) but all these appear to be 16:9 aspect ratio meaning I end up with bla

Hola!Estoy comenzando a editar videos con Premiere.Mi problema es que cuando creo un texto en el editor y lo paso a la linea de tiempo, la capa que se genera ocupa todo el espacio de la secuencia y no me permite seleccionar las capas debajo para trabajar sobre ellas.Hay forma de resolverlo?Gracias!

HelloI made some videos on my Samsung A7 tablet.When i want to edit them wit the video editor i don't get any sound.What can i do? Kind regardsKarl

Installed Premiere Elements 2021 and I now get this error message when shutting down the computer (Microsoft 10). Does anyone know what it is and what I should do? Doesn't seem to affect the Elements performance.

BAD NEWS: I just built myself an AMD-based system for Premiere Elements only to discover I should have gone Intel to get H264 hardware encoding support using Intel QuicksyncGOOD NEWS: Premiere Pro 14.2 supports H264/H265 hardware encoding using the GPU so maybe it will arrrive in PRE 2022?QUESTION: Is this likely to happen and please can I join the beta program!

Blank Text Style box for Premiere Pro 2018 - I cannot use the text style because that box is blank.I have closed and reopened the program several times.I have restarted my computer.Does anyone have a fix for this?Thanks

I recently called Adobe support, waited on hold for 30 minutes just for the agent to tell me they can't help me which was dissapointing.I purchased Adobe premier elements 15 and recently upgraded to a new phone. The video sound is not in sync by several seconds only in this program. The videos play normally otherwise and in other editing software. I just purchased this program a few years ago so I can't imagine that already new phone videos are not compatible. Assistance would be great as I use this program for work and school.