Premiere Elements

Hi,I am a new user and am trying to figure out how to move the video around on the screen to a specific position.For example, if I add a video to my project and then in the preview window I click on the video image I get small 8 blue squares around the perimeter by which I can grab and drag to resize the video on the screen. I can also grab and move the video around on the screen. My problem is that after moving it or resizing it, I wanted to put it exactly back in place, but I can't see how to do so. I could eyeball it, but I am assuming there is a way to precisely put it back without eyeballing pixel perfect placement which is hard to do.Also, sometimes I want to move the video up a certain distance from the bottom of the screen (to add in some text without clipping the bottom of the video). Is there a way to precisely move it up X pixels? This is basically the same question as above...just another use for the same feature...a feature that I cannot find.Any help would be greatly appr

Waarom kan ik nu niet meer in mijn programma Adobe premiere Elemnts 2021?   Groet Maria Valks    Title edited by Moderator to remove email address due to spammers harvesting email

Trying to do a simple Pan & Zoom to an image I have imported into Premiere Elements 2023, and have placed on the timeline.  The end results should be that the image starts out at near full frame. then over several seconds zooms into a specific point on the image.  That final point is near the center/top of the image. No matter the method I try, about 2 seconds into the image zooming towards my desired point in the upper center, the image suddenly flips to the exact center of the image and continues zooming from their until the zoom completes.  Never again even showing my requested detail location. I am using the following method:1) Place marker on the exact point in the timeline for the zoom.2) Open Pan & Zoom3) Click Reset4) Click Settings & change hold time to 0.5) Ensure timeline marker is at zero & click Add New Frame6) Maximize frame 17) Move marker to the end & click Add New Frame😎 Move and resize frame 2 at the upper/center of

So. Premier Elements 2022 - no sound. on Win 11 Pro I  simply can't believe this company. Everytime I want to do something simple with one of their products I have to spend literally hours getting it to work. A huge mistake to have got involved with them. All I want to do today is edit a simple video in Premier Elements 2022. But it seems it can't work with my sound drivers. The sound is fine - other apps can play sound. If it can't play sound it is useless. It isn't so much the money I regret as the time. No answer from support - as per usual. I wonder if anyone else has had this problem with the sound?

Bonjour,Quand j'importe une vidéo mp4 issue de drone dji, l'aperçu est blanc, tout blanc, il n'y a aucune image ... impossible de travailler dessus, je suis perdue je ne sais pas quoi faire. J'ai découvert ce problème sur élement 2022, j'ai acheté 2023 et même problème .... les photos s'ouvrent, les vidéos en provenance de mon tel s'ouvrent aussi ...Merci d'avance pour votre aideNathalie

Hello,I bought Adobe Premiere Elements in 2019, so I was still using Windows, but apart from downloading it, I never used it. I have had a macbook for several years and created myself about the purchase exactly as a hobby, I make videos. Did I use the Adobe account where I bought this program, can I somehow extend this version to a mac? Because I would like to use this program, but on iOS.

After latest Windows 10 update I can only open elements and load clip into time line. I can't play or edit it. Can't do anything. Have re installed program but still the same. Can anyone help me please 

3. Is there anything in Premiere Elements similar to "Smart Fix" in Photoshop Elements?  I've tried the "Smart Fix" but it didn't seem to do anything!   Photoshop's "Smart Fix" gets about 80% toward a "perfect" picture, so I really like it!  I kinda expected te same result in Premiere, but was dissappointed.  Probably my amature  fumbling.    [title edited by mod for better search]

Please can anyone let me know if there is a workaround to be able to edit videos filmed on iphone 12/13 on Premiere Elements 18. Do I need to updgrade to 2022 (and will I actually be able to edit the videos)? If I do need to upgrade, do I have to pay the full price again.   Thank you

When rendering or exporting my 4hr .prel file, it says "completed 1 of 19 segments, 2 0f 19 segments, etc.   QUESTION: Are Titles,Transitions, etc regarded as segments??  (I suspect the answer is yes but would like confirmation.)   The reason for the question is that the rendering process is quite fast through the first 14 segments, then almost comes to a halt on the 15th - I'd like to investigate the 15th in more detail to find out if there's a problem with that segment.   [title edited by mod]

I'll start with the simple ones (in multiple posts) 1. Is there any keystroke which centers the CTI (Current Time Indicator-red vertical line) in the current window - It's a PITA to zoom out/in to find the incator 2. I've made (pretty easily) a 4hr compilation of 1970-80's home movies  with titles and transitions (nothing fancy). QUESTION?: Export says there are 19 "segments" to to .prel file - Does the 19 inlude each Title and Transition as well as each "segment"  of the video track???   For further reference CPU 12th gen i7 GPU ASUS 6800 AMD 32 GB RAM No hard drives - all M.2 SSD's  (3TB) Completely water-cooled DIY system (Corsair, EKWB, ASUS)   [title edited by mod]

Hi, Has anyone managed to install Adobe Premiere Elements 2023 on Windows 11?  After I start the installation I log in to authenticate but after that nothing happens.    [text edited by mod]

For a video, I created a gif file.  The file has something moving the entire time.  Is there a way to have the gif moving, then stop for a specific amount of time in the video, then continue with the animation (using the same file that was put in the video, not another file), then stop again for a specific amount of time (etc), at specific times, without freezing the frame (which is the entire video as it is at that point, not just the gif)?  I am not after to freeze the entire video at the points where I do not want the gif to be moving, but just the gif itself.   I have done a workaround with this with inserting a picture file of the still gif when I want it to be still, and then putting the cut animation where I want it to be moving again, but I was wondering if there was a way for it to be easier and just temporarily freeze the gif itself. Or perhaps since gif files are not like picture files, they cannot be "frozen" to act like one, even if one c

I keep getting this problem when I upload to Youtube. Some short segments of the finished video seem to be 'corrupted' and are all jittery and unwatchable, however, when I upload a copy to my hard-drive there is no problem. Is there some sort of conflict going on? Has anyone else experienced anything similar??Thanks in advance!

I have had Elements and Premiere for 20 years, in my Organizer and they have always worked, until now.I tried to get my videos onto Twitter but would no longer work, now they do not work at all from Organizer.  They simply show as MP4, and I do not understand all of this. (I am a photo specialist.)I have never really got to grips with the videos, but wish to do so, and will use my Premeiere, but could you tell me how I can get them to work again 1) from Organizer and    2) so I can upload to Twitter.  Thank you.

Is it possible to change the address/ location of where a project is exported to in social media?  I have 2 channels and want to swap the export location.

for some reason adobe thinks i have a trial versioni purchased Photoshop Elements 2022 in june 2022 from amazonafter failing to load, i deleted and tried to reinstal Photoshop Elements 2022 on my macwhen i load the program i am told "the trial has expired".... i have never had a trial versionif i try to use my activation code the message reads "this code has already been redeemed using a different Adobe ID" i only have one Adobe IDWhen i try to download the app on the adobe site i get all the issues abovewhen i try to contact adobe i get the virtual assistant, which isnt any help 

Hi,  I recenly "upgraded" to Win 11 from 10 (not a "clean" install), and found that I can no longer finish exporting 4K projects out of PE22.  I have tired multiple projects ranging in length from 5 minutes to 20 minutes and PE22 will render as usual, but when I attempt to export, either the application crashes or it causes my PC to crash and reboot.  I uninstalled PE22 and reinstalled, can confirm that I have all latest drivers on my GPU, and my PC specs are well above recommended: Ryzen 7 5800X, Nvidia 4070 12GB OC, 64GB DDR 4-3200,  5x2TB SSD/NVM drives.  Please note, I have never experienced this type of instability in 2 years of use and it absolutely coinsided with the OS upgrade.  Would love to get Adobe's asistance w/ this please.  Yes, I can replicate - unfortunately  :-[  Thanks in advance -

no matter what i troubleshoot the same thing happens...when i turn off hardware acc it SLIGHTLY performs better but still totally unacceptable.  issue - going in to split clip to cut out silent part of conversation.clips split i delete segment (used to close gap automatically now i need to perform an extra 2 clicks to get the gap cleared which amounts to like 5000 extra clicks not the big issue though) once i have closed the gap i rewind timeline to hear what my edit sounds like.only it takes around 5 minutes for it to start playing and sometimes it just crashes...render button is unresponsive at all times now for some reason as i rendered the timeline initially to try and get rid of the HUGE performance issue... here I am a week later and still trying to remove the quiet parts out of a 20 minute video. i have not even gotten to intros outros extras transitions or anything...just load the file in and bam performance is crap...adobe never really performed as well as i tho

exporting 4k videoadobe is only using 53% of CPU all cores being used none at maxpeak single core usage 79%lowest single core usage 27%36/256gb ram used0% GPU (accelerated turned off since this makes export slower) accelerated turned on export time 49min 21% CPU and 43% GPUCPU only (acelerated off) 31minPBO on for Ryzen master clocking 4.00ghz stableGPU overclock when tested +150 core clock +200 mem clock max power msi afterburner i want to use 100% of my cpu and get each core up to 100% usage if possible i imagine i can cut this export time down to the real time length of the video since the video im rendering is only 15 minutes. Specscpu amd 3970xgpu 4090 feram 3200mhz g skill 256gbmb trx40 pro 10gos windows 10 proadobe premiere elements 2023 thank you for the help 

I created a project with about 40 still image clips. They are all visible in the project timeline. In a final exported Mp3, three of the 40 still image clips display as black. Please help!

I have been using Premiere Elements 2021 successfully right up to September 15th 2022. After rebooting my Dell 7506 2-in-1 laptop (16gb RAM, I TB SSD, only 18 months old)  to install latest Windows 10 Updates, PE2021 would not load any existing projects or create a new project. I managed to resolve this using information obtained from the community. Created a new project with a 30 second video and then tried to Export. The Export panel is displayed with all the tabs but they do not show any information, and the hourglass is displayed until the 'Program not respinding' message is displayed. For info Premiere Elements 2022 does exactly the same.I discovered that my Laptop was not configured to take restore points so simply reverting to a point before the Windows updates were applied was not an optiom. I have not been able to resolve this issue despite doing all the following:Uninstalled and reinstalled Premiere Elements 2021, after redownloading from Adobe site.Applied latest d

I'm new to Premier Elements. In Expert mode - Tools - Audio - Narration, I get an echo during playback after recording with my new Asus Vivobook's built-in mic. Is there a setting I should use on PE or the notebook to stop this? On my previous PC mic with a different video editor I didn't have this problem.

I am obviously inexperienced. I did look thru the FAQs and I know I have a big problem. In my  first big project in 'Expert View' I tried to save my project of several sequences of scenes of Christmas as a separate folder, but got all tangled up and failed. When I tried to re-enter the Premiere Elements video editor I got the 'media offline' msg. I can see the videos in MP4 format in the project assets and on the Timeline but can't find them anywhere in any folders on my computer now and foolishly didn't save them somewhere before starting the project. So the question from this very inexperienced computer user is - Are the pictures gone now?? (I fear so)

Can I delite only the sound i quick mode