Premiere Elements

Anyone know why the thumbnail below the main screen is diagonal bars? Reminds me of old analog TV screens that were out of adjustment. The video plays OK but the editing strip down below is unusable. Windows 11Premier Elements 2022GoPro 9 with Wide Angle2704x1520   29.97 fps  

I upgraded to 2022 eariler this spring.   Had no issues until recently   There have been no hardware changes since the 2022 install.   Dell desktop - i7-9700 CPu 16 GB ram; Win10.   ISSUE - Rendering has slowed down;  reviewing video files will STOP in less than 2 min;  must then hit PLAY button to get it running again; cannot scroll thru video for editing as video is stopped where you left off.    THUS FAR - we have cleared cache; uninstalled and reinstalled 2022; and spend 1 hour on phone with DELL to insure its not a hardware problem.    

Coucou tout le monde.Ancien utilisateur de Pinnacle Studio, je me suis tourné vers Adobe Premiere Elements pour réaliser mes montages.J'ai travaillé quelques heures sur le logiciel et réalisé 2 montages. Après quelques jours j'ai donc décidé d'abandonner Pinnacle et d'acheter APE via une plateforme de revendeur sur CDIS....NT.J'ai reçu un lien pour télécharger le fichier. L'installation et l'activation se sont bien réalisées.Cependant, je remarque dorénavant que mes vidéos/photos et même le curseur rouge vertical saccade tout le temps, et ce quelque soit le type de fichier inséré sur la timeline (.jpg, .mp4....).Même si j'insère seulement une photo sur la timeline et que j'appuie sur "lecture", le curseur défile et toutes les 1,5 sec environ il fait un léger retour en arrière de 4 ou 5 frames, et ce ainsi de suite...J'ai donc désinstallé cette version et je suis revenu sur la version "officielle" avec période d'essai, mais le problème est toujours présent...alors qu'auparavant je n'ava

I know you can find the location of the asset clip from the clip in the timeline using Right-click on the clip, then clip then Reveal in Project. Is there any way to find the clip in the timeline from the Project asset library? It seems like a useful tool, especially when you have hundreds of clips in a 2 hour timeline. Premiere Pro has it but I haven't found anything here in community for Premiere Elements

I was a college instructor in Graphic Arts. Two years later with the college closed and no Adobe provided I bought the Elements version. I put in the code for PS Elements and then two weeks later tried to open Premiere Elements and found that I needed the code again. Bummer my wife threw out the DVD cover and I don't have the code. Please, how can I get it?? ThanksBrian Zimmerman

Adobe Premier Elements 2022 for WindowsI place my music on the music track as a bed to build a music video.When importing video clips to lay over the music on the timeline, I unlink Video and Audio, then delete the Audio portion of the imported clip.This causes the underlying music track to also delete the same length of audio on the underlying track - how can I prevent my music track from deleting when deleting the audio from an imported video clip?I did not have this problem in a previous versio of the same software.

Is the program ImgBurn still available? When I go IMGBurn.com I am having a hard time finding the download. Thanks

what does this message mean? what can I do? comes up when export should be completed. tried different export qualities.Best regards, Mr T from SwedenHere is the message:the file importer detected an inconsistency in the file signature

Hello Community,As you know when I appy fade in/out on a video or audio track. It happens fast like in 1 sec. Is there any way I can customise that and increase the time to 2 sec.? Thanks.

Hi How do i go about deleting project files in 2021 please?  

What does to this message mean and what am to do? I created a new project and I get the same message. 

Upgraded Premiere Elements 2021 to 2022. I would like to safely uninstall the "old" 21 version. And keep old projects that were created. Any suggestions? Thanks - 

Using Prem 2020 - have a long video clip but need to split it into 2 - and want to save one of the split clips in a second project.  Is that possible?  Do not want to lose either clip.  (is there any way to split them in the Organizer)?  Thanks

I am using Adobe Premier Elements 12. I am unable to add animation to my text. I have highlighted the text, then select the tab "animation", select and effect, but then cannot apply it. Both the apply and remove buttons are there but not active for me to click on. All the other categories such as text, style and shapes work.Thank you for your help!

How to add text to video show?  Or How to convert show to SlideShowTIA

Mon programme se plante en cours de travail 

Hi all, I'm still learing PE 2022, and did something stupid. I created a project (near done w/ it) on custom sequnce settings and unbeknownst to me it changed the settings when clips were added. My recordings are in 2650 x 1440 and the project settings I had were the same. When I added media to it, I never checked the settings and continued working on it. It automatically changed the settings to 1280 x 720. I have spent hours working on this project and don't want to have to do it all over again. My questions:- Is there a way to transfer the clips with all edits, texts, audio, etc. over to a new project with the correct sequence settings?- If there is, would it affect the video quality? Thank you for any info you have! It was stuupid of me not to check the settings after clips were added, I've definitley learned that mistake. I just don't want to be forced into biting the bullet and having to do it all over again.  Thank you!

Is it necessary to install both of these programs to get them to work? I've only installed Premiere Elements on my MacOS (v.11.6.6) so far, and I can't get the Photo Editor or Organizer to open.

what is the system requrements for Premiere Elements 2019? I have windows 10  21H2 version.  

Why can't I get the Drop Shadow setting to save in Premiere Elements 2021? I click on the drop shadow box, set my angle, distance, softness and looks great. when I play it, its not there and when I return to those settings they are reset to zero. Is this a glitch? I'm using Windows 10.

It's been forever since I have started a new project and I have a newer HP computer. Spec of Processor:  Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz 2.30 GHzInstalled Ram:  16.0 GB (15.8 GB usable)Since I have not done a project in a long time I still have installed on this computer Adobe Premier Elements 12. When I go to it and click "start a new project" is scrolls across, then quits and never opens.Are they not compatible, or is the program too old, any suggestions would be great. Thanks  

Okay I am trying to change my VOB file and am looking for a free converter as this will be a one time project. I downloaded VLC for Windows and it converted the file but the quality was extremely poor. It was faded and the image "jumped" and pixelated. I then downloaded a program from MOVAI and the quality was great but ----- they wanted me to buy the program and I didn't want to do that for a one time project.I am thinking that I get what a "pay for" or don't pay for, it there any other solution to this project? I can't do an img burn as the quality of the disk has deteriorated and won't play through the whole way. So I am trying to do a work around without having to redo the whole project.  That is why I would like to be able to convert the file that I already have. Thanks

I've found multiple threads about a very similar or even same problem and they weren't resolved, so here I'll go and try it again:My Elements program doesn't recognize newly added footage as un-rendered (colored in yellow/orange) anymore and when I press render, it just plays the video from the beginning instead of rendering anything.I am 100% sure that the footage has yet to be rendered, because it's still choppy and blurred in the final exported video, as that is where rendering should come in.I've tried a lot of things from unchecking settings for media to adding more footage or adjustment layers that should add a new piece of unrendered footage or even reinstalling or updating the software, but nothing worked so far. Is there anyone experiencing a similar problem or knows how to fix this? It's only been happening ever since a recent update and all of the old footage in my project is still rendered ("green").

Under my Adobe PE preview files folder I have a PRV folder and in it are rendered AVI files. When I select a file and input it into a DVD maker program I get the video portion but no sound. Is there a way to be able to also input the sound that is with that file?  This came from a PE 12 project

The render function in premiere elements 2019 recently stopped working without any noticeable differences to my system or video files. I click render andmy default audio hardwa the video just started playing. I upgraded to premiere elements 2021 hoping it would fix it. No dice. I've deleted rendered files for all projects and tried changing the default audio hardware as was suggested in other threads. Still no luck.  The last thing I tried was letting an hour long zoom video play through in it's entirety after clicking render, hoping it would actually render the timeline. It didn't. Got the same choppy, impossible to edit video. Any idea what the problem could be?