Questions

Help! I have a recording that finishes at 28 minutes, but the playhead continues on after that until it hits 40 mins approx - and that's what the file saves as - 40 mins. I have no idea why this is happening - there's nothing else recorded after that. How do I cut it so that there isn't 10+mins of silence playing at the end?

 Version 25.2.0.123 MacOSWhen switching files in waveform view, Audition is not remembering the playhead position, instead it changes it to the position of the last file. Play should stay in the same place when the file was last active.

Windows 10 64 bit; Audition CC 2019The title of this discussion says it all. I have to record myself reading a script which is in a PDF file. I was hoping to import the PDF and be able to read it while seeing the Audition interface and record my voice. Can this be done? I can convert the text to another format such as Word or even a text file, if PDF isn't supported. It would just be very helpful to see it within Audition.

Hey everyone,I’ve been using Adobe Audition to clean up audio recordings for podcasts and online courses. One of the recurring issues I face is dealing with background noise—especially ambient hums and light static. I’m currently using the Noise Reduction and Adaptive Noise features, but I feel like I’m not getting the cleanest results possible. Does anyone have a recommended workflow or settings that consistently work well? I’m also exploring external resources to refine my audio production skills. Looking forward to your tips and experiences using Audition for noise cleanup!

I am working on a piece where I  talk for 2.41 seconds. Every thing was fine when I worked on recording yesterday. Today I cannot get the program to record anything. I mean it just stopped. The little red record button doesn't work. It doesn't even 'act' like its being selected. The other buttons seem to work, play, stop rewind, etc. I am working on a multi-track format and have seven tracks to record.

I'm working in a project on Premier Pro, when I send the audio to Audition and try to apply de NR it show me this message "Adobe Audition CC quit unexpectedly." I have try everything but is not the file, is the program, any suggestions ? please let me know!Thanks!![Mod note - title changed to make it more specific.]

Hi All I have a Yamaha MG12xu mixer connected via USB to my laptop. The mixer is also connected to a pair of Yamaha HS5. The issue is, in multitrack recording, after recording the first track, when i arm and record the second track while having the first track in playback, it is recording the first track into the second one along with the instrument connected to the second. For example, in track 1, i recorded the drums. When i arm and record the bass guitar into track 2, the drums from track 1 is also getting recorded into track 2 along with the bass.  Can anyone help with how to prevent this from happening? Thanks in advanceJoseph 

I'm sorry, but WHERE THE HELL IS THE PREFERENCES BUTTON. I'm on mac, running audition 25.2. I simply wan't to toggle synchronize clips with waveform editor. It's not under the edit dropdown menu, and the only thing that comes up when I search "preferences" in the help menu is "Time display<synchonize with time display preferences." Is that the same thing at synchronize with wavform editor? Anywho, this is really frustrating 🙂 

https://www.youtube.com/watch?v=OB7gi76h8Yo&t=78sHere is the enemy radio chatter voicelines of the ATC soldiers from an FPS game F.E.A.R.2.These voices have obvious breathing out or processed sounds of speech with reverbs, like when you stick your lips close to the mike of your headphone and record your voice on a radio.How to remove, or at least decrease the beneath muffled part and extract the clear and light part of the speeches? Thanks!

I recorded some "On-Hold" messages for our phone system which I produced the finals in Audition CC.  Unfortunately it ends up that the phone system (Avaya) requires a specific recording type and I'm not figuring out an export scheme to match what it requires.CCITT u-Law 8.000 kHz, 8 Bit, MonoWill someone knowledgeable on audio formats and the ability of Audition to export to this format let me know the settings or if it's even possible?Thanks,Dave

Please how can I use Adobe Audion CC to Stream live? I  want speak into audition via Scarlett and path the mixed voice live to my streaming software (Obs). I hope this question is understandable. Is it possible to directly speaknlive using audition?

Why is Audition recording room atmosphere and voiceover too loudly? Wavelengths of quiet room atmosphere (white noise) are HUGE and voiceover volume is recording so high it is off the charts and so loud it sounds like speakers turned up full blast. My settings in both software and hardware have not changed since my last recording session about a week ago when everything acted normally. There appears to be no solution for this. Does anyone have an idea of what could be going wrong? 

When storing audio files on my PC I always downsample 192/24 audio files to 96/24 files using Adobe Auditon CS6. Yesterday, when playing back one such file, I was surprised to discover a single loud pop/click/skip in one downsampled track when listening to it using JRiver Media Center 34. On opening up the offending audio file in Adobe Audition CS6, I was puzzled to find that CS6 played it back without any problem. Visually, there appeared to be nothing much wrong with the waveform where the pop occurred, as can be seen here:  However I then opened the same file at the same point in iZotope RX5 and got a bit of a shock because this is what it showed: So I have two questions. First, how can Adobe Audtion CS6 and iZotope RX5 give such remarkably different renderings of the same part of the same audio file? And second, if the iZotope RX5 rendering is accurate (as suggested by the pop/click/skip), how could a high quaity and trusted piece of software like CS6 introduce

Hi,I'm building a file that contains a sequence of multiple 1-second audio files (e.g., sweeps, harmonics, noise bursts). In the Multitrack editor, I’ve aligned them side by side, with Snap to Clip Edges enabled and no intentional overlap or crossfade between them.However, every time I try to combine them—whether by:Bounce to New Track > Selected Clips,Export Mixdown, orusing Merge Clips…the resulting file shows visible and audible overlap between signals, especially at the transitions (see spectrogram). All files were generated with “Effect > Generate > Tones”, duration 1 second. I’ve:Disabled global clip stretchingDisabled all fades and crossfadesDisabled smoothing of edit boundaries in PreferencesTried adding a 5ms gap between all files in my track before bouncingTried adding 1ms fade-in fade-out in my clipsDespite this, there is still consistent spectral and temporal overlap in the output file. For my use case, I need the signals to remain perfectly adjacent, sample-a

I've been using Audition since before Adobe bought it, and it's always been the best audio editing program. But the last few years it has suffered an incredible amount of crashing. Today it crashes at least three times a week and causes me to spend from one to three hours making something, which disappeared when Audition crashed. I am madly frustrated that Audition has become directly counterproductive. When the program crashes, you can download a version that it thinks is the last saved version, I tried that once and it was a disaster. For some mysterious reason it never fetches the last saved version. When I tried, it downloaded a much, much older version than the ones I could load myself. Again directly counterproductive. I've been thinking about writing for a few years, but dropped the idea as I'm sure it won't lead to anything. But now I'm so frustrated that I have to spend so much extra work just because the Audition keeps crashing, so now I'm trying. Does anyone know what this i

Adobe audition - sesx files to resell with filters, is it possible? I would like to create a presets and sell them to and eshop.Thanks you guys for clarify.

Hi everyone... I am looking to finally transition to Adobe Audition after using Cool Edit for decades. I tried playing around with a bit of mastering today, but found that my exported tracks seemed to have compressed the waveform a little.  Sorry if my explanations are poor, but hopefully this pic will demonstrate what I'm talking about. You can see the original version of the left, and then my two Audition exports on the right, which look considerably 'smaller' in its waveform range. Is there a default setting or something that would force this? Thanks in advance for any and all assistance!- Ryan.

Hi, I need to keyframe the Parametric Equalizer - LowPass frequency, but I donť see an option in the envelopes drop down menu, see image, or maybe I'm just blind.

I got a new HP laptop (running Windows 11) and installed the latest version of Audition. I opened an old project and it plays back just fine BUT when I plug in my headphones it continues to play through the computer speakers. I tried this with other audio programs and when I plug in my headphones the audio switches to headphones, just not with Audition.Has anyone experienced anything like this before? I haven't.

As ths subject, does any ways complete this requirement?

All versions of Audition, Except for wav files, all other 24 bit audio files are incorrectly displayed as 32 bit.  Please see screenshot.  I use a 24 bit flac file for demonstration.  Has anyone reported this issue?  Hope it can be fixed, thanks.

I'm experimenting with Audition for the first time. How do I import an AAF file?

Hello!  I am still learning how to use Adobe Audition so forgive me if this seems like a ridiculous question.  I am using Audition 24.2.  I have one multitrack session where I am recording VO for an animated short film I am working on. In one of the tracks, I have recorded all of the VO for one character. Each of the lines is separated from all of the others in the track. I am now trying to export each individual line as its own .wav file.  Is there a way to do this? I tried "edit -> Convert to unique copy", I've tried "Right click -> Export audio of selected range markers" and lastly I've tried scouring the internet for answers or shortcuts on how to do this and there is not a straight forward answer except for exporting this as one big audio file and cutting it into individual clips in adobe premiere/after effects which I don't want to do at this point because I am kind of on a time crunch. Please tell me there is an easier way to do this

...suddenly popping after system update last night. I have checked settings, everything appears normal, but showing 'not working' for no apparent reason. Everything has been re-set, re-booted, etc, so now what for a "non techy" gal!!!??? Any very specific guidance will be greatly appreciated!! Alas, no phone support for Audition...REALLY?? Wow! Thanks guys/gals!!  05/24/18Kelli

I just upgraded to Audition 25 but there are only 2 languages available for the text to speech function - English US & English UK. No gender or voice styles except one. I know this is a very popular issue, so why is it so difficult to get a voice pack added / plugged in? Ive looked all over online and adding the voice pack via MS dosent work.I only really upgraded so I could use the TTS feature, but it seems I've wasted my time and money. Does anybody have a solution? Im only interested in english UK genders and voices. Thanks