Questions
Recently active
I get an error everytime that I want to apply an preset effect from the bridge to a clip on AE. it reads:"Can't import file....." Unsupported file type or extension.
Bridge CC (2017) Mac OS 10.11.6This started with a recent update but not the latest. If I deleted a files in Bridge it will hang around in a ghost form (I can see it but I can not open it) for about 20-60 seconds. A good long while for sure. In addition, if new files are added to a folder say through tethered shooting or Image Processor, the files take awhile to show up in the Bridge Content. The files will be there if i look through the OS finder. Both parts are frustrating.I called tech support and after trying things, I was told just to use my OS finder. This is not an acceptable solution. This is how the software is supposed to work. any help is appreciated.
HI , I HAVE SOME PROBLEM FOR USE AFTER EFFECT "2015" CC VERSIONI USE AFTER EFFECT FUNCTION "BROWSE IN BRIDGE"AND CLICK THIS FUNCTION , THIS WARNING MESSAGE IS OPEN" AFTER EFFECT WARNING , ADOBE BRIDGE IS NOT INSTALLED. PLEASE , DOWNLOAD AND INSTALL IT TO USE THIS FEATURE GO TO HTTP://CREATIVE.ADOBE.COM APPS"SO I INSTALLED ADOBE BRIDGE CC "2017" AND TRY TO USE FEATURE : "BROWSE IN BRIDGE"AND THIS WARNING MESSAGE IS STILL OPENEDAND I TRYED TO INSTALL ADOBE BRIDGE "CS6" , AND STILL THERE (WARNING MESSAGE)SO I TRYED TO FIND A ADOBE BRIDGE CC "2015" BUT I CAN'T FIND , AND I DON'T KNOW HOW TO SOLVE THIS PROBLEMPLEASE HELP ME
I'm running Mac OSX 10.11.5 and recently encourage issue were I'm unable to delete any file from the local hard drive. I can see below error.
Photoshop 2015 CC V. 2015114.r.301x64Bridge CC V. 6.2.0.179x64Acrobat Pro DC V. 2015.020.20042Above is what I'm using. Using Bridge, I bring a 1280x720 .bmp image into Photoshop and the photo is very clear. No matter what view in Bridge I use (Essentials, Filmstrip, Output, etc.) the image appears to be compressed and loses fine details. When using the output option in Bridge to create a PDF (Acrobat), this loss of detail is also present, however, when I click on the the PDF the detail pops into view but casts a tinted look to the entire image? When using a colleagues work station, this does not happen and the image doesn't appear compressed.
I have a huge database of photos in various subfolders. I can check search sub folders and it will show those, but it will not show the photos in the sub folders of the sub folders. It will only show the actual folder and I would like it to show the contents. How can I make this happen??? Do I have to setup my whole organization system again to work around that or what??Thank you for any ideas, trying to make searching by keywords as easy as possible for all my coworkers also searching the files. -Megan
I have a Nikon D750 and am unable to view RAW files within Adobe Bridge CS5. I only see the NEF thumbnail and not the photo. When trying to open the RAW files I get the following error message:Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.Please visit the Camera Raw help documentation for additional information.I've tried updating my version of Camera Raw with 7.1 per Adobe's website, but it says I need to update my Adobe Application Manager. I try to update this but from the following link: Adobe - Adobe Application Manager : For MacintoshHowever, I receive the following error message:Adobe Application Manager may be damaged. Download and install a new copy of Adobe Application Manager.So, I tried it again but received the same error message.I feel like this is just going in circles. I'm not sure what to do here, but I absolutely need a solution quick as I need to be able to view/e
Bridge won't even launch for me since I updated to 2017. Well let me correct that. it launches around 5 minutes after I click the icon (not exaggerating).Then it sits, unusable, so long I finally open task manager and close it.Since the 2017 update I've had to install previous versions of Photoshop and now I'm installing bridge cc.What's going on with this? every version it gets worse. Then After Effects gets the 2017 update and it's phenomenal. I can work MUCH faster now in AE than before, but not the same with Photoshop and bridge. bridge has been getting terrible for a long time, and it stinks because I rely on it heavily. Ever since 2016 update it's gotten much slower, hangs more often and just plain sucks to use.Is there anything that can be done to stop these problems? I can't be the only one struggling but i didn't see anyone complaining about Bridge
A problem with Adobe Bridge. Used via Creative Cloud on Windows 10. Photoshop seems to be working fine. I got lots of help from an Adobe expert and finally fixed the problem - Bridge (2017) refusing to open - by reinstalling Bridge (2015). I'll be perfectly happy to continue like this, but I pressed update, expecting it to update Bridge 2015 but it reinstalled B2017 instead. I can't now find a way of installing Bridge (2015). Is this possible please?
Just subscribed to CC and finding it hard to navigate. All the things I did in PS CS6 automatically are different with this version. How do I sync my camera with cc or bridge in this version?
I have done EVERYTHING. I am currently on chat with Adobe Customer Care (what a joke) and I still can't "right-click" on a jpg, png, tiff, etc. and set Bridge as my default program. I can make Photoshop my default app for photos, but I can't get Bridge to work. I am working on a Windows 7. It doesn't seem like a Windows problem because all other Adobe apps work fine when I set them as a default app. Also, it worked fine before the update. Does anyone have a solution that doesn't involve doing these steps? I also tried the file associations in Control Panel > Programs > Default Programs. It's the same dialog so it was pointless to try.It still doesn't show up as a program I can "use" to open this file. Yet, I can easily view pictures in it, I just have to go the long way to find them or copy and paste the location in Bridge.
I'm on a MacBook OSX Yosemite V. 10.10.4I did have an iPhone 5c I had always used Bridges' "get photos from camera" to download photos from my phone.But after my phone took a dip in a river & was no behaving properly. Bridge no longer wanted to recognize photos so I assumed it's inability to work with Bridge had to do with electrical malfunctions caused by the water getting into my phone.I've since then upgraded to iPhone 7 plus, same Macbook (with Yosemite OS) and I'm getting the same message. At first the message shows: device is locked (even when it isn't). Alternately, whether I unlock my phone or not, I get the message "This device does not contain any supported media."I ONLY ever use Bridge as I work exclusively within Creative Suite for all of my design work. And I went to the oPhone 7 so I could streamline suing the better camera along with my usual preferred workflow. How can I get my work to flow? I can access my photos without jumping through time consuming cloud
EVER SINCE I UPDATED MY MAC BOOK PRO BRIDGE NO LONGER RECOGNIZES MY CANON 5D MARK III. PHOTO SHOP DOES BUT WILL NOT RECOGNIZE RAW FILES.
Hi, I have run Bridge with latest camera raw and OSX since a few years and I have basically used the same size sensor on my camera but the generating thumbnails takes longer and longer with each upgrade of bridge? I would say that generating 30GB of lowres thumbnail from a Nikon 21-36 Mpix camera takes me about 2 hours and I have to scroll so the images become visible otherwise Bridge the won't generate? I always have a top model mac book pro that never is older than 2 years with maximum size RAM, Processor and largest SSD drive. Is it just that slow? kind regards // Alex
Hello,I have couple of users who work on the server to open their files. Before opening the files, they open in a Adobe bridge to see the preview. Once all the users see the previews in Adobe bridge then my server HDD and network reaches to 100% .Is there any solution to minimize this effort of Bridge because they require to see the previews.Thanks.
Why does the importer not remember the last running picture number? I have to type the last picture number of each manuel one.When renaming files in Adobe Bridge, the program remembers the last image number, the previous file renaming.Can this be set in any file (xmp?)Adobe Photo Downloader: File rename -> rename extendetThe Adobe Photo Downloader does not saves (memorizes) the last sequence Index Number:The Adobe Bridge saves (memorizes) the last sequence Index Number:How can I fix this?many thanks in advance!
Hi there, I am a bit of a klutz and seem to regularly find myself accidentally deleting images in bridge. My husband has turned off the 'are you sure you want to delete?' option but I would like it back! Any thoughts as to how I do this please?Thanks
Hi everyone!We recently got the Adobe CC suite at work. We are working in a Big Corporate environment so all cloud sync functions are disabled.Vefore I updated to the latest version of Adobe Bridge everything went smooth... but now it's like everyday hell with Adobe Bridge.Problems:1. The app starts, and then it does not respond for a while2. Intermediate freezes, while navigating3. When a file is selected in the browser Bridge freeze for a short while before there is a preview.4. Constant hangs, it feels like Bridge is trying to connect to something and gets in a non responsive state constantly5. When navigating there is a constant lag and freeze state!So the sum of all these problems makes Adobe Bridge CC completely unusable I tried all the tips and tricks from the Adobe forums, but seriously NOTHING helps.My system:Laptop: Dell Precision M3800, 16GB RamGPU: Nvidia Quadro K1100 MOS. Windows 10 Enterprise, 64-bitAll drivers are up-to date.Do you have any ideas how to fix this?Br Jonat
First I own the bridge program not from creative cloud/Two issues I need help with.1. After update to latest Mac software Bridge does not recognize my camera anymore. Is there a way to get Brige back to working properly without having buy something new and if so please give specific details and steps.2. And most pressing, I went to open a folder filled with photos I had previously uploaded so I could do some color corrections. In bridge I see half of the photos but not all that are in the folder. When I click on the folder a prompt box comes up and says I need to purged the central cache folder. When I went to purge cache it basically just spins for hours and says building criteria. I have work that needs to be done and need this fixed ASAP!!
Part 3 in a 3-part Series on how to use Adobe Bridge [Note: this was written some time back and is out of date on a number of issues. Nonetheless, there are some points that may still help others. If there is interest, I may update this to the current Bridge. Thank you.] [Part 1] [Part 2] [Part 3] Whether you are looking at the contents of a single folder or the contents of multiple-folders-within-folders. The ability to find a specific image or a category of images in an easy fashion can only save you time. While it may seem that the work involved to make it easier and faster to find images may seem like wasted time, it really isn't. When you are looking for "THAT" one image, the time spent in preparation will be moot. The question is: do you want to spend time preparing to find any image (at any time) or do you want to spend all your time finding any one image? There are three different ways to find your images in Bridge: Utilizing the original Metadata Ra
hii just installed the lasteste version of PS and Bridge.if i give a colored label in Camera Raw it become white in Bridge.any idea ?thanks
Bonjour,I can't open psd file from bridge to cc2017. I've got the message " Window don't find adress C:\prog........cc2015.5"?depuis la mise a jour de bridge cc2017 il m'est impossible d'ouvrir un fichier PSD depuis bridge vers Photoshop. j'ai un message d'erreur me disant que window ne trouve plus cc2015!comment modifier ce chemin d'acces ?Pour information, je peux ouvrir les raws et depuis photoshop je peux reouvrir les psd.merci de votre aide
I have been doing some research and have tried resetting all the settings in Bridge I have CS5. It started acting up a while ago and now it wont find the camera at all when trying to import photographs!
Is there a way how to rearrange the order of photos in Adobe Bridge (or Lightroom) and then save these photos in this rearranged order?Lets say I want the photo _MG-7918 be first, photo _MG-6234 second, photo _MG-7856 third and so on. I know I can do this by renaming the files, but thats too dificult if you have 100 photos. So maybe there is an easiest way.Thanks for any answer.
I have a large file (3.08 GB .pst) and Bridge will not allow me to edit the metadata. I get an error that says "This property cannot be modified." Any idea why I am getting that warning? It is my original file - scanned copy of an image for a restoration. Thanks!
Remix with Firefly Community Gallery
Thousands of free creations to fall in love with and remix in Firefly.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.