Questions

Hellounfortunately when I try to open Camera Raw 2024 from Bridge it doesn't work. I already updated everything and it still doesn't work. I also tried to open Camera Raw from photoshop and it still doesn't work.Does anyone have any clues what I can do ?

Hello, I have been using Camera Raw from Bridge very often, and all in a sudden this message pops up when I launch it and it wont launch. Below in the picture in French, it says "The modifiation with Camera Raw requires that an eligible product be under licence."   I have launched Photoshop, uninstalled photoshop, reinstalled photoshope, reinstalled Camera Raw, reinstalled Bridge. Nothing works. And in Creative Clouds, it says all apps are up to date. Does anyone know how to fix this?Thanks in advance!

I just got a Nikon Z8 it's running the latest firmware.  When I load the  Raw files into Camera Raw, the Exposure is set to -23, Highlights is set to -10 and Shadows is set to +10.  With my D850 these are all set to 0. I notice that some exposures have severe vignetting while others with the same lens opening and distance are fine.  You don't see the vignetting in the rear monitor so I assume these are Camera Raw translation issues. Are other users having this.  Has Adobe said anything?

Not all of us have massively high end video cards, especially on laptops and compact desktops.   I run mostly on an i9-12900 16-core 8 thread CPU with Intel m700 128gb integrated graphics and it takes 6 minutes minimum to perform noise reduction on a RAW file.  No matter how I change the settings.  From what I understand this is an inadequate GPU issue.  So basically almost all the CPU cores are sitting idle during NR.   There should be a way to offload the NR to the CPU or share the load with the CPU.   

I have a Mini (late 2014) w/ 64bit processor and running OS 10.14 Mojave. I'm thinking of installing Elements 15 (which I'm told is compatible with the above.) My Leica camera outputs DNG files which I need to convert to PSD or JPEG for manipulation in Elements 15. Is there an available version of Camera Raw that's compatible with all the above?

Is there a script that can adjust the parameter value in the camera row? For example, I want to find out the current "temperature" value and add 5 to that value.Can I develop it into a cep script? Or should I develop another plug-in? 

Adobe DNG Converter doesn't extract the original raw embedded in the DNG created by Enhance > Denoise (run from with LR or CR). Tested on LR 12.3 / Adobe DNG Converter 15.3 / Mac OS 13.3.   1. Place this Nikon Z 9 raw into a folder by itself and import it into LR: https://www.dropbox.com/s/6sew7rh7j08lsfv/DSC_1260.NEF?dl=0   2. Do Enhance > Denoise.   3. Move the generated DNG into a new folder by itself.   4. Run Adobe DNG Converter, click Extract, select the folder from step 3 as the input and output folders:    

As of the date of this post, the download page for the Adobe DNG Converter links to 16.1 and not the latest 16.1.1, which provides updated camera support.   https://helpx.adobe.com/camera-raw/using/adobe-dng-converter.html https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

My images on Adobe Camera Raw looks like this: Any ideas!! Images are perfect in photoshop,Lightroom,etc.

Is there any way to convert existing Adobe Standard DCP profile to be used with a specific camera? Example...when I use "Adobe Color" or "Adobe Standard" on my Canon EOS 7D files the tonal response/color rendition is really boosted and looks great as is. I barely need to make any adjustments in the files. Using the same profiles on my EOS R8 files looks almost like a bleach bypass effect. Very washed out and I need to spend way more time than before. The camera matching "Camera Standard" is of course better in terms of richer colors but far from the old school "Adobe" look. I've read somewhere that ACR is using older color tables for the dinosaur models and I was wondering if there is any way to get those signature colors back in newer CR3 files? I've tried some tricks in the book like altering the CameraModel tag in the DCP profile but that didn't work. Output is still the same desaturated look. I have also tried to fiddle with Exiftool and manipulate the RAW file so that ACR bel

I use the Perspective correction tools and while they are frustrating they are worse now.Why have you removed the widening and tall(ing) tools? Not even surte why I cannot select several frames to do the same action.  

Hellorecently I have been having a recurring problem when making adjustments to my Raw images in Camera Raw.This keeps happening:Any ideas why this might be?Thanks in advance.

HiA few years ago i was using a tool in camera raw wich allowed me to change the size of an eye (height, tilt, width, etc).Does anyone knows what happend to this tool ? I can't find it anymore !thx

I've spent the last two days in chat and remote control with Adobe support, without coming to terms with anything. The problem is this: I noticed, on a very underexposed photo (NEF file from Nikon D850, Adobe RGB 1998 color space), that in Camera Raw it was displayed in a certain way and, when developed and opened in Photoshop, the picture had softer and less contrasty shadows. All attempts to replace and customize the color profiles were useless (and in any case they would have been, since I cannot work on custom profiles that are not RGB 1998 or sRGB); I worked with very patient Adobe agents who tried everything, working remotely on my computer, noticing that the problem also arose in Lightroom and in Camera Raw used as a simple filter in Photoshop. We know that Camera Raw and Lightroom work on a different gamut than Photoshop, Bridge, etc. The two profiles, on my computer, since a week or so, simply don't match anymore. But when you have to work hard on shadows and blacks the proble

I mainly prefer to use Bridge, Photosho, and ACR for photography (over Lightroom) however this bug has been an issue for months now and quite annoying. Basically, I simply can't scroll down do see all sections like Detail and Optics. If I minimize all sections then click to open Calibration, I can only see Red Primary, and can't scroll down to green. It doesn't matter if I am in full screen or window mode, and even in Masking, the same scrolling issue happens. In Masking, if I have Light and Color and Effects expanded, it doesn't show me all of the Effects section.I am on a PC with Windows 11 and have 3 monitors, dual side by side and a small monitor below. Not sure if that is the reason for the glitch, but even if I open ACR in the small lower monitor it still doesn't scroll down enough, as you can see in this screenshot (below).Again, this has been happening for months now and not yet fixed. It is quite annoying, and so I have been using Lightroom instead for many projects.

In , helpx.adobe...camera raw...introduction, there is a heading "about the Digital Negative Format." Under this, there is the sentence "For more information on the DNG format and DNG Converter, see..." Then a link which goes to a "Page Not Found." Is the info on this missing page available elsewhere?

Hello, this seems a strange one but here it goes, please I need your thoughts to solve this one: I am working on a new computer and all the systems, and all Adobe, are working fine. Except when I touch the Color slide of the Noice Reduction in Camera Raw. The system jumps in a nanosecond to black and shuts down, and then restarts again.I am working with Win 11Nvidia GeForce RTX 3080Intel Core 19-14900KFRam 64GBAll drivers are up to dateAny light to solve this is truly appreciatedSergio 

Hi Guys, Does anyone know how to easily scroll through the camera raw pre-sets? An alternative to hovering the mouse over each pre-set? Like select the top then arrow down would be ideal so that I dont have to keep looking away from the image to check my mouse is in the correct position. I keep finding myself wanting to do this but cant figure it out. Many thanks

Just purchased a Canon R6 Mark ii and shot some pictures in RAW and JPEG of my son's basketball game.  Got home, offloaded the pics onto my hard drive and tried to convert to DNG like I did with my old camera RAW files.  Every file shows the error message "There was an error parsing the file." Thought it might be the new memory card I purchased but I took some test shots on the old memory card but files from both get the same error, so I'm thinking it may be something with the camera? I have an Adobe subscription, so the version of Camera Raw is the latest.  Windows 11.

 since i use my Z8 and  all lens version Z, camera raw can corrige deformation but can't corrige vignette !! something works wrong ? thx

Windows 10 PS6I'm using a noise reduction app from Topaz to clean my photos post-processing in CS6. I use the app as a stand alone and it creates a .dng file.I notice that Bridge shows the correct image for that file & I can open it in PS RAW processing ...only once.  After that 1st time all that Bridge shows is the dng icon & PS gives me a window that says "Photoshop cannot open this file".If I go through the noise reduction process and the app creates a new dng file I can open that one...only once.This is only occasionally an issue for me, but what the heck is going on?Why can't I access the dng file a second time & why does PS say it can't open it when it handles the file without a problem the 1st time? 

Hallo liebe Community, seit November letzten Jahres kann ich keine RAW Dateien mehr öffnen, das Programm stüzrt ab. Hier der Inhalt des Fehlerberichtes:<?xml version="1.0"?> <!DOCTYPE AdobeCrashReport SYSTEM "AdobeCrashReporter.dtd"> <crashreport serviceVersion="12.3.0.202306131643_44f1cd7" clientVersion="12.3.0.202306131643_44f1cd7" applicationName="Adobe Photoshop Elements" applicationVersion="24.0" build="24.0 (20230922.Git.master.31442ae)" source="Windows-Client" crashType="SIGABRT"> <time year="2024" month="1" day="29" hour="9" minute="52" second="21" timeoffset="60" timezone="Mitteleuropäische Zeit"/> <user guid="f57c7e06-8ca6-4a55-93c1-30c0442a6ce4"/> <system platform="Windows 11 Pro" osversion="11.0" osbuild="22631" applicationlanguage="de-de" userlanguage="de-DE" oslanguage="de-DE" ram="8023" machine="Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz" model="Intel64 Family 6 Model 142 Stepping 12" cpuCount="8" cpuType="8664" cpuFreq="2304 MHz

Hi  I notice that denoise AI function in CAMERA RAW is very slow : at leat 1 minute for a 20 Mpix picture. I have a M1 Mac computer. Comparatively, 15 secondes are needed for the same picture in DXO pure raw2. Some setting are missing in photoshop ? Thanks in advance for your feedbackRegards

hi, i'm subscribe and i have updated Photoshop and Adobe Camera Raw but when i try to open ACR photoshop just do anything, it is like ACR window didn't appear. when i press ESC key, just go back to photoshop.. im using windows.