Questions

Is there a way to uninstall Camera Raw? Every time I try to open a file in Photoshop, the file opens in Camera Raw. I do not use Camera Raw, but have no 'Uninstall' option available. Creative Cloud DesktopPhotoshop 240.1,Windows 11Thanks. 

Dear community,I shoot with Fujifilm and in some situation (like in this one) Fujiflm Profile doesn't render quite well.Take a look at this picture shot with my xPro3, the sunset's colours are not rappresented correctly in any 'Film simulation'. First the .tiff straight out my camera with FUJIFILM RAW STUDIO, CAMERA RAW 15 interpretation at second:

I want to return to the original photo I already edited in Light Room, and give it some tweaks.  I can find it in Light Room but it is greyed-out.  The error message says it is a duplicate of a photo already in the catalog.  After I edited the photo, I moved all my original photos onto different hard drives, so the computer is probably unable to find them.  The option of finding the photo with the little exclamation point is not offered for this particular photo.  I can't make sense of opening the catalogs.  Also, I seem to have both Light Room CC and Light Room Classic on my PC.  I think I edited this photo on CC.  Any tips as to how to proceed?  I'm also unable to re-import it.Thanks.

RAW-Dateien mit Camera Raw 15.0 als Jpeg gespeichert, sind in etwa halb so Gross (5-10 MB) als Raw-Dateien mit Photoshop in Jpeg gespeichert (20+ MB).Einstellungen (bei CR und PS) sind mehrfach kontrolliert, identisch.Woran kann es liegen? RAW files saved as Jpeg with Camera Raw 15.0 are about half the size (5-10 MB) than Raw files saved with Photoshop in Jpeg (20+ MB).Settings (CR and PS) are checked several times, identical.What could be the problem?

I want to edit DNG files in ACR but it appears that it is is not saving edits as I make them. It only saves edits when I hit 'Done' or 'Open'. This is bad news if ACR crashes which it has done several times today. To work around this I want to periodically save my edits. I have setup the 'Save Image' dialog File Naming to use the Document Name and nothing else (see attached). I would expect that ACR would then over write the original file (yes I _want_ ACR to do this). However ACR ignores my setup and persists in appending '_1', '_2' etc to my saves. Adobe support say this is what's supposed to happen but surely if I tell it not to add a suffix it shouldn't. I have seen other posts on a similar subject that involve running renaming scripts but that seeems way to complex for function that Word/Excel does without thinking.  Is this a bug or have I missed something?

I have updated both bridge and PS. the problem of camera raw can not open PS  was gone. Thanks Adobe fix this.

Or x2 clicking a smart image. I have a super fast PC, what the heck is this? No I don't have acronis true image either. I am running 128GB RAM, a ryzen 9 4.2 GHZ and a 1070 graphics card with SSDs. Anyone?

when i open an image from photoshop to adobe camera raw 2023 the image darkens and then lightens when back in photoshop. Help please!

2019 iMacRetina 5K 27 inch Processor3.6 GHz 8-Core Intel Core i9 GraphicsRadeon Pro Vega 48 8GB Memory32GB macOSVentura Photoshop v 24.0.1 Camera Raw is causing my iMac to shut down completely. It doesn't give any crash report messages after restarting.   It seems to be a guarantee to repeatedly happen when I'm using brushes to lighten shadows, for example, on the side of someone's face in photographs. It has occurred in the basic adjustments panel, also.  Things I have tried but didn't fix the issueClean install of Ventura + newest versions of Photoshop/Camera Raw and Bridge Clean install of Monterey + newest versions of Photoshop/Camera Raw and Bridge Clean install of Monterey + version 23.3 Photoshop/Camera Raw and 12.0.3 Bridge   It's currently back to Ventura and the newest versions of Photoshop/Camera Raw and Bridge.  I turned off GPU in camera raw preferences. It seemed to make the iss

If I save my camera raw photos in the photos app, there will be thumbnails identified as "raw," but when I select photoshop as the application to edit the photo, it opens in photoshop. There is the option to use the camera raw filter with the image, but the interface that opens is the regular photoshop, not the raw interface, so I am guessing that the file opened as a lower resolution jpeg, not raw, is that right? If so, is there a way to open images from Photos in raw format?

Hello Everyone. I am using Color Checker Passport to create a Camera profile. Basically, I shoot the Clor Checker Passport and inside camera Raw, I save It as DNG. Later, I drag and drop the DNG File Into Xrite ColorChecker Camera Calibration Software to create a Custom Profile. This is where the profile is saving:C- User- User Name- AppData- Roaming- Adobe- CameraRaw-Camera Profiles.Inside Camera Raw, I see the Adobe original Profiles, but I don't see any Custom Profile. Also, If I want to create Custom White Balance, I save It at this address:C- User- User Name- AppData- Roaming- Adobe- CameraRaw- Settings.Inside-Color Checker Camera Calibration Software, I can also save as ICC-Tiff, I never do that.Is it better to drag the DNG File, or Create a Tiff file, and Drag it inside the ICC-Tiff?Please let me know what is the issueThank you very much.  

I’m experiencing an anomalous behaviour with the zoom tool in the latest ACR 15.0 update (Mac user, Monterey):1. if I click once to zoom in a specific area of the image the zoom does not reach the 100% as set in the preferences but sticks to the last zoom level used2. if I zoom further using the trackpad the zoom moves automatically to a completely different areaThe only way to zoom in a specific area seems to be only the cmd/ctrl shortcut to activate the selection box. Using just two fingers on the trackpad (or simply drawing the box without shortcuts as it was possible until few years ago) is so much faster.I know I could use the Lightroom style zoom, but I can’t see why I have to constantly change my habits, so the question is: is it a bug? Does anyone have the same problems?

Camera Raw 15, Bridge 13.01.583. Mac M1.  OS Montery 12.6.1 Today I noticed that after making a vertical geometry correction in ACR and then appling it to another image (apply previous conversion), it changes it into an horizontal correction instead.

Just updated Camera raw with latest version 15. However, maskeing dialog box, message indicate " Unable to load AI selection model". I'm running an iMac version 10.15.7. Could this be the problem as this unhancement in Camera Raw requires OS 11.00 or above

Dear community, Since a few days I am unable to save a new made PSD file on my MacBook Pro M1 2021 documents. PSD immediately crashes. The only way to save a document is to the Creative Cloud.  As you can see in the screenshot bellow ''Bewaar'' which means ''Safe'' becomes unavailable. Also I cannot change the location or use the other buttons except for ''Save to clouddocuments''. I am using the new version of PSD 2023. I hope one of you could help me out, because this is very frustrating. Thanks for your time in advance! Delano 

What's the difference between Balance and Blending sliders? 

I have tons of Local adjustments presets ion Lighjtroom. Surprisingly, they do not appear in ACR ( ACR and LRC share the develop presets). I am unfortunate to find where the Local adjutments for ACR are stored so that I can copy my LRC adjustments to ACR.Thank you for your wise help 

Occasionally, the new Masking icon will not show me the pop up list of masks. It just shows sliders to adjust but the option to "Create a New Mask" or to edit a previous Mask does not show.  Ten minutes ago it did.  That's twice today that it inadvertantly quit showing.  Did I accidently trip something to cause it to hide?

" Faulting application name: Photoshop.exe, version: 24.0.0.59, time stamp: 0x634899c1 Faulting module name: Camera Raw.8bi, version: 15.0.0.1264, time stamp: 0x632e09b3 Exception code: 0xc0000409 Fault offset: 0x0000000000f28735 Faulting process id: 0x0x4BEC Faulting application start time: 0x0x1D8EB298F22F8D7 Faulting application path: C:\Program Files\Adobe\Adobe Photoshop 2023\Photoshop.exe Faulting module path: C:\Program Files\Common Files\Adobe\Plug-Ins\CC\File Formats\Camera Raw.8bi Report Id: ba38d767-f01f-45f0-bfd0-0950b0491ff3 Faulting package full name: Faulting package-relative application ID:" from: https://community.adobe.com/t5/photoshop-ecosystem-discussions/photoshop-2023-v24-garbage-windows-photoshop-2023-v24-just-randomly-closes/m-p/13349412/page/2#M685223

I'm not sure if I'm asking this in the right place. Today, out of nowhere, when I open an image in the Photoshop Raw Filter, it immediatly crushes the blacks in the image. I use this filter every day on pretty much every image I edit and I've never had this problem. Does anyone have an idea on what to do?The compression on this screenshot may make it too subtle to see here but the top image you can see into the shadows and the bottom one the blacks are completely crushed. This happens in Photoshop 2021 and 2023. Image is a 300dpi JPG that was first edited in LR.

Suddenly, when I launch Photoshop (2023) Camera Raw shows up and blocks access to Photoshop. I need to work! This is frustrating. No options to quit Camera Raw and it won't let me go to Photoshop. Mac OS Version 13.0.1 (22A400)   Thank you for any help. How do I quit Camera Raw?

I have ongoing problems when I work with RAW files, my laptop shows them with damaged graphics. I thought that it is because of the updates, but the laptop was updated and the problem does not disappear. What is a bug and how to change it?

So this is a weird one and over the years it has been a headscratcher. But it seems consistent. My renderering in LR/ACR becomes worse after a period of time. Since it seems to happen gradually and subtle I am not sure what is causing this.To describe what I am seeing is a bit difficult but overall this:1) Incorrect gamma response: Adjusting the exposure sliders don't give me the right look. Lowering the exposure just makes the image dull and dim. Midtones seem to ...fade and die. Adjusting highlights easily becomes lost highlights (or with very bad rolloffs). Basically the overall shadow-midtone-highlight balance is off.2) Lack of detail in the previews. They are not blurry in any way and at first glance it seems normal. But that extra crisp rendering is not there. Ususally I don't see this until I have reinstalled everything including windows (as I will describe further below).This forces me to go heavy on the contrast slider/curves and clarity since my images seem to lack deep pop.

I updated to photoshop 23 and camera raw 15.0. Now photoshop crashes when trying to open CR3 files in camera raw. whole thing runing on macOS Ventura 13.0.1. Photoshop will only open raw files when camera raw 13.1 is installed - problem is then that CR 13.1 doesnt support my Canon EOS R5. Ive tried resettting both Photoshop and Camera raw settings to no use. Ive also deleted all adobe apps and creative cloud app and then reinstalled everything again.  Any solutions out there  

Had to get a new computer and it has win 11. Got Photoshop CS 5 reinstalled. Installed CR 6.7. I use a Nikon D300 which is supported. I can't get camera raw to open jpg by just opening image. As in I could open image and camera raw would automatically open.Camera raw will open in Bridge, but I don't use bridge. I can use Open As camera raw and it will open in camera raw. Would like to take out the extra step and have things the way I am used to. I have searched the forum and elsewhere for suggestions.