Questions

I am on macOS Monterey and I have installed captivate 2019 LS21. But I am unable to install the eLearning assets (ver 11.0), it keeps giving me Error Code 41.Is LS21 for eLearning Assets on mac available ?If not then how to resolve this ...

Can not find Captivate Accessibility tab to adjust Tab Order cap

The subject isn't quite right, but here's what I would like to do:I would like to set up a "go to next slide" global button that is enabled only in the last three seconds of a video (or at the very end if that is easier).  The video length on each slide varies. I'm sure this is actually an advanced action, but I'm still at a loss on how to write the action to work in the way in which I described.  Thoughts?Thank you!!

I have Captivate 2019. I imported  my video demo slides into my cptx project by going to Insert -> CPVC Slide. I also have a Title Page at the start of my project that is not a video slide. I also imported audio into Captivate for each of my video demo slides. When I preview my project in Captivate everything works properly, but when I publish my project as a Video, the title slide and the audio for each of my video demo slides are the only things that play properly. None of my video demo slides appear on the screen, there is a constant loading/spinning symobol that displays. throughout my entire project except for the Title slide. The project is saved to my local work server. Does anyone have any input as to what could be the issue? 

Exit Search     I have a 4 tab slide with an info panel that changes information based on the tab that is clicked. However on the state of the info panel, I would like to have bulleted points come in as I am talking about it on a different state.  Any suggestions or help would be appreciated.     No relevant post is found.   Post to community

HiI have two videos that are toggled show/hide by using a buttonI was under the impression that I could ad a cmdmute action on the button to mute the clip that show.But im struggeling to find this in the action. I would like that when the variable are 1 the video showing will play and the other be mutet. The vimeo are in webobjects 

Basic text is not being read in the EDGE browser. I'm previewing in HTML 5 and I've filled out the Accessibility Description with a duplicate of the text on screen. How can I preview the functionality before publish when the "Read Aloud" only reads the playback skin Nav buttons?It seems like none of the content is recognized for assistive technology, Please help 🙂 

I am new to Captivate and new to a job, and one of my first assignments is to go through old Captivate folders in our FTP (Filezilla) and figure out which files were used for the courses currently published to our LMS. There's little rhyme or reason to the naming of the folders or files. For example, we have a folder that has loose files plus folders named v1 through v5 and a folder named "vSteve." The "Date Modified" for the files are all showing up the same (I believe this is the date in 2017 they were transferred to the FTP). Is there a way to tell which files were modified most recently so I can figure out which ones are likely the ones on our LMS? I was hoping that info may be in the Project Information when I open up the file in Captivate, but no luck. Thanks in advance!

I'm working on my first SCORM e-learning module in captivate, it looks great but there's definitely been a learning curve. When it comes time for the final test/quiz I can't seem to get the correct pass/fail results. I want the learners to pass with 70%+, but it wouldn't work without 80%+ at first, even if in the quiz section of the "publish settings" I put 80%. I also tried choosing x points or more to pass, but that isn't working either. In the process of trying to fix this (deleting questions, adding new ones, etc), I seem to have made it worse and now I don't get quiz results at all-- the module skips the results and goes to the final thank-you slide even tho I did make a score slide and have the "show score at the end of the quiz" box checked in the quiz settings. Before the results box disappeared, the module started failing the tests even at 100% correct. I feel like there must be some obvious thing I'm missing.  I attached screenshots of the settings I'm usi

I am working on a curriculum and I would like the students to be able to fast forward the SCORM in our LMS.  Right now they can fast forward on the Skin but when they do, they audio stops completely.  Is there any way to allow the user when they fast forward to hear the narration in fast forward as well? I am working in Captivate 2019 and publishing as SCORM files for upload to our LMS.

HiHere is a problem to solve for you all 🙂I would like to have two videos on the same slide. I understand this cant be done up front but maybee some one out here have solved it.I would like to have two vidoes on top of each other then switch between the two by pressing the keyboard.Is this posible in any way?  Im using the latest captivate 11.1

I am attempting to import a PPT file to Captivate 2017 in Windows.  And, yes - I have saved it as a .ppt file. It goes through what appears to be the beginning process, but then Captivate just dissapears!! I am on MS Office 365... does that make a difference?

Hello,Good Morning/Good Evening,How to write an advanced action for the scenario given in the below screenshot? 

I am trying to embed some youtube videos that I've embedded in a previous training and they will not load.  Any tips? Thanks so much.

HiI have created a simple Hamburger menu that change state when clicked (Menu open) and then back from when clicked again (Menu closed) The graphic og the button are inside the different states.I copied and pasted this into the master slide. I cant see the actual button/the graphic inside the states, but the actions are still there. Why is this? 

Finding slide transitions used to be so easy in the previous versions of Captivate and I am working on a new project in Captivate 9 and am unable to find the slide transitions. I looked in the manual and it said they were in the general area of the properties inspector. Could not locate them. Please help.Thanks.

I would like to live stream 360 video and through Captivate lay over the interactions. Is that possible? If yes, how?

It looks like I have two issues right now. The first is that published Adobe Captivate projects that include Slide Videos imported from Vimeo are no longer playing the audio from said videos. My client brought this to my attention for the published courses I developed for them, and they are also no longer playing the audio on the review site where I sent them to my client for review. These courses were published with at least Adobe Captivate 11.5 but possibly 11.8 (it was in the fall, and I may have been using the earlier release).The second issue is the feature request/bug reporting tool for Adobe products is sending me to this website. Is anyone else experiencing these issues? If you have already got in touch with Adobe and have a resolution, I would love to know about it.

I'm working on a computer with a Windows 7 OS and Captivate 5. I have "stereo mix" enabled as default recording device.(Realtek high definition audio).My task at hand involves demonstrating a video captioning tool, so I need to be recording the video's audio as I step through the process of creating the captions in a web based environment. I must admit that what I am trying to accomplish works easily with other screen capture tools (even free tools) but I would really like to be able use Captivate 5 for this project and others upcoming that require the same functionality. As a last resort, I've also tried adjusting the audio settings within the project (selecting the "narration" option as shown) but I'm not having any luck getting the results I need. I'm really hoping that it's something simple I'm just missing, and that  forum experts can nudge me in the right direction... Thanks very much for your input.

I am in over my head. I have a client who wants animated videos that are closed captioned and that have an interactive TOC. This is what I have done so far:1. Created the audio files from transcripts in Adobe > Audition.2. Created the animated MP4 files with Adobe > Character Animator (with imported audio files).3. Created the captions (I guess they have to be "open" captions) with Adobe > Premiere Pro.4. Last step (not done yet): Interactive TOC. Adobe > Captivate?Correct me if I am wrong, but I think this is the process in Captivate:1. Create an empty project, with as many empty slides as there are MP4 segments/topics.2. Import one MP4 file into each slide. (Captivate converts the MP4 to an FLV file.)3. Create the interactive TOC in Captivate.Is that accurate so far?Can Captivate export the final, complete project back to MP4?If not, does Adobe have a way for me to do what I need to do?The final deliverable has to be one single file that can be launched/run from something

I created a very simple course with a quiz that only has 2 questions using Captivate 2019. Then I uploaded it to the SCORM Cloud to test. I found that if user exit/close the course right after click the "Submit" button and before press "y" or any key to continue, when they try to re-launch the course, the system will prompt "Continue from where you stopped last time?", if user choose Ok, then the course will freeze and stuck at the 1st question slide, no matter where I click, the course is simply non-responsive (see screenshot below).But if I choose "Cancel" at the prompt "Continue from where you stopped last time?", then the quiz will continue to the next question slide. Since most of users will choose Ok, how can I fix this bug so the quiz won't freeze?Plus, isn't "Cancel" suppose to erase the progress and take the user to the begining of the course? Why it is not doing it?  

Hi Everyone, I have created a custom quiz with a custom result slide. I'm not using the built-in system quizzing variables. It is all setup and working in preview but I now need to send the custom score (e.g. myquiz_score) to LMS. Unfortunately, I can't override the built-in score variable which is read-only. Any suggestions? None of the solutions has worked as mentioned here https://community.adobe.com/t5/captivate-discussions/submit-my-quiz-score-to-the-lms-not-the-quot-native-quiz-quot-results/td-p/7209480  

HiI have added a voice to a button with the action "play sound" that I want to be played when the button is clicked.But the sund plays when the slide is opened?

HiI was playing around with some buttons but decided to go another direction. But now two objects are stuck. They are not in the time line and they are not on any of the master slides. It do not mather if I change the master slide. The objects are stil there? HAve can I find and remove them. 

We are interested in pulling LMS data into Captivate  2019 using APIs. How can we go about doing this?