Questions

Since updating to 15.4.1, LR Classic (on Mac Tahoe) is stuck trying to sync 74,000 images, even though I only have 4,400 images in albums marked to sync. I’ve tried both deleting and rebuilding sync data, but the problem pops right back up.Anyone seeing this? Ideas?

Wenn ich in meinem LrC 15.3.1 ein Foto im Entwickelnmodul bearbeite und weitere Fotos mit dieser Bearbeitung synchronisieren will, klicke ich unten rechts auch “synchronisieren”, hier hängt sich LrC auf und nichts geht mehr.Normalerweise öffnet sich hier an der Stelle ja dieses kleine Popup-Fenster mit den Einstellungen für die Synchronisation, das öffnet sich aber nicht, das Programm friert ein, nichts geht mehr und ich muß den PC neu starten.Grafikprozessor habe ich deaktiviert und steht auf “Aus”Mit der Problembehebung im Chatbot…“Lokale Synchronisationsdatenbank reparieren:Beende Lightroom Classic. Navigiere zum Speicherort deines Lightroom-Katalogs. Suche und lösche die Datei Managed catalog.wfindex im Ordner Lightroom Classic customer catalog sync.lrdata > Aktueller Ordner. Starte Lightroom Classic neu und lasse die Synchronisation erneut laufen....kommt das nächste Problem, am Standard Speicherort des Kataloges “ Windows: \Benutzer[Benutzername]\Bilder\Lightroom “ gibt es kei

Lightroom Classic’s secondary display selection keeps switching from my preferred monitor to another connected monitor. This interrupts my editing workflow and forces me to manually reconfigure the setting.I use a three-monitor setup. Lightroom Classic runs on my left monitor, which is Windows display #1. My preferred secondary display is Windows display #2, the middle monitor. I use that screen to review crop changes and overall edits while working in the Develop module on monitor #1. However, Lightroom Classic randomly changes the secondary display to Windows display #3, and I have to go back into Preferences and set it again.This has been happening for years, and it occurs multiple times within an hour of editing. The repeated reconfiguration breaks my focus, and my current workaround is insufficient. I’m asking Adobe to confirm whether this is reproducible on their side.Steps to reproduce Open Lightroom Classic. Use a three-monitor setup. Set the secondary display to Windows di

I have a relatively new (almost 1 year old) Mac mini M4 and I can't get it to download the update, 15.4.1 that is showing in my Creative Cloud. I starts downloading but extremely slowly and eventually grinds to a halt.Is the problem with me or is it a general issue? I’m currently running LR Classic 15.3.My Mac mini is an M4, 32 GB memory,Mac OS TahoeStorage 304.33 GB available of 994.66 I read a suggestion that I run Creative Cloud Cleaning Tool but though I have downloaded it I can’t seem to open it. Not sure why?

tried eveything… none was working. any help?

I have lost my LR cat file. Not sure how this happened but I have tried everything. I had a corrupted external SSD that I had been using to store photos but LR Classic is on my laptop. I realized it was corrupted because I couldn't write to it. Luckily I could still get all the files off it. I moved everything to a new external HDD and reformatted my SSD. I am pretty sure my catalog was housed on my laptop but even if it was on the corrupted drive I had moved everything off it before reformatting. I have the catalog preview file but not the actual catalog anywhere. I’m pretty depressed thinking I will have to start a new catalog, import thousands of photos and have lost all the edits.  Is there any hope for my situation?   

At first when I tried to synchronize a folder in Lightroom Classic, Synchronize said there are 424 photos to import, but then it did not import any. I am on release 15.3.1, which I am told is the latest, and Windows 11 Pro. I have installed all operating system updates and GPU updates. I have also restored preferences in LR Classic. At the top level of my catalog, selecting All Photos, I have tried looking for specific files that are not getting imported, and LR can’t find them, so they can’t be there somewhere else in my catalog. I have never had this problem before. I have quit LR several times, and it sometimes would tell me that there was a corrupt file, so I deleted those files from my system.Now when I try to synchronize, it says “importing files at their current location”, but nothing ever happens. When I ended the import, it told me that 2 files were unsupported or damaged. The files are type .ARW, created by a Sony A1 camera, that I have had no problems with in the past.I have

Steps to reproduce:  Try to Open LRCError Message:  Lightroom encountered an error when reading a catalog file and needs to quit.  Light will attempt to dianose the problem the next time it lauches.Tried: Uninstall and reinstallTried:  going back to previous versionTried:  Alt upon opening and tested integrityMy nerves are at the breaking point….I need it to work again.

Issue summaryOn my Mac, Lightroom Classic 15.3 becomes unresponsive after some period of normal use. I have to Force Quit it. After that, Lightroom Classic can relaunch, but RAW files can no longer be opened properly. I cannot guarantee exact reproduction steps every time, but the issue has happened multiple times in 15.3 and has not happened for me in 15.2.1 on the same machine.Environment- Lightroom Classic: 15.3- macOS: 26.4.1- Apple Silicon Mac: M1 MaxWhat I can confirm- This issue started after updating to 15.3.- It happens after some time of normal RAW workflow use, not immediately on launch.- Once Lightroom hangs, I have to Force Quit it.- After relaunch, RAW files still cannot be opened properly.- Downgrading to 15.2.1 on the same Mac resolves the issue.  Relevant lines from the report:Process:      Adobe Lightroom Classic [12526]Version:      15.3OS Version:      Mac OS X 26.4.1 (25E253)Exception Type:      EXC_CRASH (SIGTERM)Signal Number:      15Publisher Process Name:      

Import multiple photos, select one photo and rate it 5 stars. When another photo is selected it will be rated 5 starts as well. This makes culling a challenge and effects workflow speed.

I've been using the Ai supported denoise feature, and while it works well, I receive an error message and I have to run it twice instead of once. The program makes me do it over again before export, and both processes take up two hours each. The error  says to reach out to customer support and post here. I use a Lenovo, and recently this has been adding more unnecessary time to my workflow. I’ve made sure everything is up to date, and to my knowledge, my computer is capable of running the program and operations.

When LR Classic opens I can see all of my folders but the previews are all grayed out as the screen shot shows. I tried uninstalling the application and reinstalling it but the problem still happens.  

Expected Result:Lightroom Classic should successfully export a batch of raw images using full GPU hardware acceleration.!--tgqphd||[]-->!--tgqphd||[]-->Actual Result:!--tgqphd||[]-->The system immediately crashes into a Windows 11 Blue Screen of Death (BSOD) with BugCheck code: 0x00020001 (HYPERVISOR_ERROR)!--tgqphd||[]-->.!--tgqphd||[]-->!--tgqphd||[]-->Steps to Reproduce!--tgqphd||[]-->Open Lightroom Classic.!--tgqphd||[]-->!--tgqphd||[]--> Go to Preferences > Performance and ensure "Use Graphics Processor" is fully enabled (including for Export).!--tgqphd||[]-->!--tgqphd||[]--> Select a batch of raw images and begin a heavy export.!--tgqphd||[]-->!--tgqphd||[]--> The system immediately crashes into a BSOD mid-export.!--tgqphd||[]-->!--tgqphd||[]-->!--tgqphd||[]--> !--tgqphd||[]-->Workaround Found:!--tgqphd||[]-->Turning off GPU hardware acceleration specifically for Exports!--tgqphd||[]--> inside the Performance preferences

System:Lightroom Classic 15.3.1 running on Mac mini M4 Pro 48GB 650GB spare storage.Catalogue is on the internal Mac mini SSD. Problems:This problem occurs frequently:Open up LRC, Edit three or four images in Develop module. Proceed to next image, but the image in the Develop module doesn’t change, or there is a grey panel. Shut down LRC - Writing Metadata changes into XMP…sticks at 29% and makes no further progress. So I have to force close LRC. I have tried disabling GPU etc. Any suggestions please? Thanks Richard

Why is Adobe Light Room so slow? Simply scrolling through the film strip can take seconds between images. Newly added images can take up to 30 seconds. Stitching is super slow to create panoramas compared to other programs like PTGUI. Simply selecting the crop tool causes the LR screen to go grey and then refresh. Everything I do in LR is slow and I’m constantly waiting on it.   

when I try to use the replacement tool with the Generative AI option I get the message: “Generative Remove FailedWe've encountered an issue and can't complete your request at this time. Please try again later” this keeps happening no matter how much later I leave it

RAW file exported as jpeg (5 meg) in Lightroom Classic V15:3:1 with content credentials applied I see no CR pin on the image as suggested in Adobe help videos.

Lightroom Classic 15.3 intermittently becomes completely unresponsive (permanent hang, requires Force Quit) when opening RAW images in the Develop module or when generating previews during import. A macOS `spindump` captured during a live hang shows the cause is a **self-deadlock inside the Camera Raw engine** bundled with Lightroom Classic 15.3.The operating system's own deadlock detector flagged it. The spindump header reads:- `Deadlocked: 1 thread - Thread 0x11612a "Queue Processor - NegativeQueue_1"`- `Blocked by Deadlock: 3 threads - "Queue Processor - OpenNegativesForDevelop_1, _2, _3"`The deadlock graph points the thread **at itself**:`Deadlock: ... thread 0x11612a "NegativeQueue_1" -> thread 0x11612a "NegativeQueue_1"`The deadlocked thread's call stack runs through AgKernel (Lua) into CameraRaw, ending at:`... (CameraRaw) -> std::mutex::lock() -> _pthread_mutex_firstfit_lock_slow -> __psynch_mutexwait`with the kernel annotation: `(blocked by turnstile waiting for th

I run LrC 15.3 om a Mac Powerbook. I purchased a new WD 24TB hard drive when my old 12TB filed up, and moved my photo files to it. I also just returned from a trip where I imported several thousand pictures as well. When all migrating and importing was done, the catalog seemed happy. All pictures were recognized. Since then, pretty much every day for the last four days when I open a collection a number of pictures have the dreaded exclamation point indicating that the picture can’t be found. For the past three of those four days I’ve reimported those pictures from a 2TB travel drive and reedit the pictures. Yesterday evenoing all was well. This morning I have the same problem. I haven’t moved to 15.4 because I didn’t want to compound my problems with a new catalog and new version. Any thoughts or suggestions would be greatly appreciated. Thanks.Marty

I've been uisng LR for a while to apply my photo presets to video clips, as a simple means of getting my photo preset applied to clips for consistency. So applying the preset on import, then exporting the clip to edit in other software.Now with LR 17.4, when I go to export, the export dialog progress bar apepas in the top left, but there is no progress, nothing happens. It just sticks on 'Export XX files', and wil stay like that for hours or even days with no progress at all. There are no error messages, and when I work through the export dialog box there is no indication that it isn't going to export.Any ideas? Thanks in advance. 

I get this error message every time i try to apply an adaptive preset to an image.All the portrait ones do no work, same for subject and blur backgroundOnce you try to apply the preset, the error message pops up after 2 seconds. so it is not running and running to find something and then times out. Error Message pops up nearly immediately Categories not affected are the sky presets and the landscape presets.LRC Version : 15.3 Any idea how to solve this? Thanks Jay

I haven’t been able to sync my data to the adobe cloud. The sync keeps getting stuck and I’m not sure what’s hanging it up.

LrC won’t open as it is saying that my Master Catalog is corrupted.  But it doesn’t tell me what to do about it.  It gives no other options.  I need to be able to open LrC

I now have 15.3.1. Last update I remember I was prompted to answer a question about my catalogs. Maybe I did not answer the question correctly.