Questions

Hallo,bei mir funktioniert seit kurzem die Funktion KI-Entrauschen nicht mehr. Ich habe sie vorher schon oft problemlos verwendet. Ich habe es sowohl bei Lightroom Classic (17.0.1) probiert, als auch mit Lightroom (8.0). Ich verwende Camera Raw 17.0.Lightroom Classic: Es kommt gar keine Fehlermeldung, er macht einfach nur nichts. Vorschau wird geladen, 1s angezeigt, dann nur noch grau; beim Klick auf Verbessern schließt sich das Fenster und für 1 Sekunde zeigt sich oben ein Arbeitsbalken, es gibt aber keine ausgabe.Lightroom: Die Vorschau wird richtig geladen. Beim Klick auf Verbessern kommt die Fehlermeldung "Das ausgewählte Foto wird von dieser Funktion nicht unterstützt". Ich verwende Sony ARWs und Nikon NEFs. Ich hab auch schon versucht, die RAWs in DNGs zu konvertieren, aber mit demselben Ergebnis. Und das kann dann ja irgendwie nicht sein, dass selbst ein DNG nicht unterstützt wird? Laut Adobe werden mittlerweile sogar die Pano-DNGs unterstützt, bei mir nicht. Alle Adob

Guten Morgen,warum ist bei mir bei der Personensuche bzw. -identifikation die Möglichkeit eine Person abzuwählen verschwunden (rechts unten das rote Kästchen). Ich kann nur links nur mit dem grünen Haken zustimmen oder den Namen ändern. HAb ich da irgendeine falsche einstellung vorgenommen?Viele GrüßeRainer

Ever since I updated to Lightroom Classic 13.5 anytime I use masking especially the AI masking, it makes Lightroom come to a complete stall.  I have to restart Lightroom to make it usable again.  If I'm not using masking Lightroom is incredibly fast for me.  I tried updating and version 14 was worse so went back to 13.5 but still bad.  I have a really great system and had no issue with version 13.2.  However, recently I upgraded my GPU thinking that would help.  It did not.  Everytime I use masking on an image, I have to restart Lightroom.  My specs for my computer are super above their minmum requirement and as I mentioned Lightroom is super fast outside of masking.  I'm super frustrated because I'm unable to use half of what Lightroom can do and we pay too much money for this program not to be able to use.  Again, this has been an issue ever since Lightroom 13.5.  It isn't just me as forums are filled with others having the same

I've had it in the past where some photos get hung up on the syncing screen and never actually sync. Right now I have it knocked down to 17 but every time I upload more photos then there's always a few from every collection that gets hung up.   I have gone in and tried to add stars to get it to resync, I have deleted some and added them back in with no luck, and I just rebuilt sync data. I still am getting the same 'uploading' activity with no progress.   What other ways can I get it to sync properly? I'm on Windows 11 LR Classic version 14.2 and I do have a zip file with LR diagnostics from syncing.   [Moved from ‘Bugs’ to ‘Discussions’ by moderator, according to forum rules.]

My basic issue is that Library previews do not update reliably in Lightroom Classic after work is done on a TIFF file in Photoshop, whether the “edit (original) in Photoshop” command is used, or the file is simply opened from the Finder and edited. It started a few months ago. It’s intermittent: sometimes previews update immediately, perhaps half the time, though it seems to be getting worse. Sometimes I can force Previews to update using one of several methods gleaned from this forum or other research (see below), sometimes nothing will work except re-saving the file in PS, then reimporting it to LR, OR making an (un-needed) adjustment in the Develop module to trigger preview update in Library. The excellent Lightroom Queen web site suggested I try a bug report as they couldn't come up with a solution for me. After several weeks troubleshooting I’ve learned that making an adjustment to a parameter in Develop, even a very small one, seems to trigger the preview to appear correctly

Why is it that in my development mode, the thumbnail and the images turn completely black, as if they have disappeared? I’m unable to do anything. When I navigate to the next item, it suddenly applies some kind of edit without me even hovering over any of the presets with my mouse. 

When i import images from my memory card into lightroom the images on the memory card are deleted. Why does this happen and how do i stop it from happening?

When moving files between folder within Lightroom it sometimes remove the GPS information in EXIF. It had never did that in the past. have the latest version for Windows. 

Adobe lightroom damages my images as shown in pic.. actually this issue only happing when i open the image in adobe photoshop and lightroom. both drone and camera images have this issue  looking for soultion to solve this issue  d

Hi all,I have ARC A-series GPU at the moment and it is mostly okay for what I need. Stable and fast enough for my every day stuff. Only gripe is that if using AI based denoise in Lightroom - it's slow as hell.  I don't need this feature much, but would be nice to have, if needed. Topaz and other 3rd party tools seem to be okay.As I understand, it is a bug with Intel drivers after fixing another one a year or so ago. Intel does not have any updates yet, when it will be fixed, it is listed only as known issue.It seems that all complaints are for A series GPUs. So I wonder if someone has newer B series GPU and could try, how much time denoise would take with it. I am thinking about replacing the GPU, but getting RTX4060 or similar entry level Nvidia GPU is way more expensive here, than getting next generation ARC. And I am quite budget restricted at the moment, so would prefer best bang for the buck solution if possible.

Bonjour, je suis abonnée depuis juin 2024 a ligth room classic au tarif de 11.99€ par mois, hier soir impossible d'ouvrir le logiciel: cela me demande d'acheter lightroom au tarif de 14.99€ ou d'ouvrir la version d'evaluation. J'ai essayé de me reconnecter, j'ai changé le mot de passe mais rien ne fonctionne alors que je vois mes photos téléchargées en arriere plan!Merci d'avance pour votre aide.Anne

Error messge is 'Lightroom Classic quit unexpectedly'. I get the message when quitting Lightroom. Running Lightroom 14.1.1 on Mac OS 13.7.2 (22H313) Ventura. Issue only started after updating to the latest release of Lightroom Classic. Any suggestions? Thank you!

Hi all, As I understand it, the "Main Window" - "Secondary Monitor" feature in Lightroom Classic requires two actual physical monitors. I have become used to this in my workflow. I have two 32" monitors and use the left one for the main program window while working in the Develop module, reserving the right one for a full display of the photo I am working on. I am now planning to migrate to an ultrawide monitor, and it has come to my attention that there are software solutions for Windows 11 that allow for "virtual" monitors within a single screen. Windows PowerToys (FancyZones) seems to be one of these solutions. Are any of you working in this format? If so, how reliable and effective is the emulation solution? Thank you in advance for any replies. AK

Quand j'ouvre Lightroom Classic le système est bloqué et le message "ne répond pas" apparaît. 

I have a Mac OS Secuoia 15.3.2 and a LrC 12.1 version (Camera Raw 15.1). I am not able to open my lates Nikon files with this version it seems. But at the same time I am not able to upgrade my LrC to the latest version. Im am not given that possibility in Adobe cc, no new updates appears there for me.  Why is that? Can anybody help me out?  Arne, Norway

Hi, I am having trouble with the masking tool in Lightroom Classic installed on my Windows Laptop. I have used it extensively in the past but now when iIclick on the masking tool the box flashes up and then disappears. I don't know why it wouldn't be working as I am not doing anything differently. Any ideas would be very appreciated.

Hi, so the texture slider does NOT affect fine details, though according to an adobe agent sliding "texture" to the right "accentuates details such as bark or hair". Now I dont have any portraits or photos with bark in my catalog so I cant test this myself, but I was always of the belief that bark and especially hair are considered fine detail.  I guess the question has 2 parts to it: #1 have you ever come across bark and/or hair that you would NOT consider fine detail, #2 have you used the texture slider and it affected hair or bark in your photo? thanks

I was taking pictures at a high school softball game, and the field is surrounded by a high enough chain link fence that there's almost no shooting location that isn't looking through the fence.  When I zoom in, the fence is mostly blurred in the image to the point that it's barely noticeable (though it still gives the autofocus fits!), but there's still some diagonal darker areas in the image from the highly blurred fence pattern.  It occurred to me that correcting an image to compensate for the darker cross-hatch pattern from the blurred fence would be incredibly tedious by hand (and probably still wouldn't look quite right), but it seems like it would be almost trivial for an AI based editor -- assuming someone bothered to train one to compensate for that specific pattern.   Surely I'm not the only person trying to do sports photography that has had to shoot through a chain link fence.  Does anyone know if there are any AI tools designed to compensate f

This error appears every time I open LR Classic.: I have reset preferences it didn't help. I don't care about keeping the preset--don't even know what it is. I just need to get rid of the annoying error message. I'm using a MacBook Pro.  

I have two collections:"source" with 150 images"edited" with 106 imagesThese 106 images are part of the "source" collection. Question: how can I create a smart collection with the difference between these two collection.This smart collection should contain the 44 images that are in the "source" but not in the "edited" collection.

How can I sort pictures imported in same library but taken with different cameras (for instance when you shoot a sports game alternating between two cameras with different lenses) on timestamp when picture was actually taken, to keep the pictures in chronologic order, but I don't know how to do that...  They sort chronologically now,  but also sort themselves on name given by camera -which is totally irrelevant at this stage. Any help appreciated...

I have dual monitor plus my MacBook Pro's screen. I have Lightroom classic open on my left monitor; however, this window shows up on m MBP's screen. I could not figure out how to close this window. What is this window use for? I don't think I've ever seen/used it before.  

I'm trying to use the AI Denoise on quite a few images and I noticed Lightroom was only using 4GB of RAM. I changed the camera raw max cache settings to 64GB (I have 128GB available) and restarted the denoise and it still only uses 4GB of RAM. Is there any way to make it use the maximum amount I'm allowing it to speed up the process?

I've been playing with the new HDR mode and trying to understand whether it's useful to me. After watching a bunch of videos from Adobe and others, I'm still no clearer. Maybe my estimable colleagues can help. I sometimes capture HDR images using bracketing, but all of my work is targeted towards print, which of course is SDR at best. Is there any benefit to editing HDR files in HDR? Or is all of that information already compressed into the SDR range when I'm editing in SDR mode?

I have a few thousand photos from a vacation that I am trying organize.  In the library module, I enter text on the caption field and sync them across multiple images.  From time to time I would run into the 'unqiue contraint' error (seen screen shot).  It happens frequently and the only way around is to restart lightroom.  I have seen this error before and normally happen every once in a while.  It seems to have gotten worse with the latest version of lightroom.  The catalog is brand new, created just for this set of vacation photos.  Does anyone know a way to fix this annoying error?  On macos with latest lightroom (auto updated).