Questions

I am testing the harmonize feature on some sports samples to gauge capability.  I ran it on an individual player and it worked well.  However, when I rant it on this team/background combo it fails to run.  I’ve tried with various team/group images and it appears to only have issues when it is a group.  Any thoughts or suggestions on how to get harmonize to work with this type of situation would be greatly appreciated.  Samples of images reduced in size to be merged included below.Team Sample PNGBackground Sample:  

firmware .2727 when trying to have software select subject:error "can not complete your request  a pop up says Subject classifier model not loaded correctly.  

Your standards are ridiculous.  You rejected an image because a girl was wearing a sleeveless top.  No nudity.  Just a bare shoulder.  THAT IS TOO RIGID!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Bei Arbeitsfläche ändern, muss man jedes MAL die Maßeinheit neu auswählen (bei uns cm). Auch unter Voreinstellungen "Maßeinheiten & Lineale" kann man das nicht ändern, bzw. bringt es keine Lösung.

 When I bring up the sky image, the entire image is invisible, and it appears cut off as above. What's the problem, and how should I solve it?

ACR Lag Issues.ACR (Beta) and 18.3.0.2528Mac Studio M1. 128GB RAM. Tahoe 26.4.1When loading images from Bridge into PS (Beta) to straighten uprights the guides are slow and laggy. Masks do not show coloured overlay and the whole thing is laggy.This appears to have started from the last update.If the images are opened into PS (Beta) and then opened in filter / acr there is an improvement thou when using the sharpening mask the mask isn't shown when the ‘option’ key is held.Regards,Mark

Photoshop Beta 27.8 and XP-Pen shortcut remote v4.0.9(a349adf) The shortcut remote fails to import settings, and when keys are mapped manually the only keys that work are those that were part of the default config. (keys not yet mapped) The remote works perfectly with the non beta version of PS 2026. I export the config settings from the PS 2026 and when I try and import the config to PS beta, the PS beta disappears from the remote shortcut settings. I also experienced multiple crashes of the XP-Pen settings app while trying to manually map the keys. I’m attaching the shortcut config file in hopes it will help.I had to change the extension on the file because the .pcfg file extension couldn’t be attached. It’s just an XML file but it has to be changed to .pcfg in order for XP-Pen to import it. … Scott

I tried to submit a bug report and after detailing the issue along with screenshots and step-by-step instructions. I got an error that said duplicate titles are not allowed.  WHAT?? When I started the submission, it checked my title for related content and there were only four posts back on version 25 so I selected none related and continued filling out all the details.There was no way to move forward, I clicked on the edit description to see if changing the title would work and it started me over from the very beginning and hitting the back button landed me HERE where I am now submitting a question instead.This is incredibly frustrating since I spent the time to detail the issue and it’s all gone. I don’t have time to troubleshoot your guys’ bug reporting and frankly it makes me NOT want to submit reports.Either way, the XP-Pen shortcut remote works perfectly with the latest PS 2026 but when trying to import the settings to Photoshop Beta 27.8 the PS settings disappear from the config

I'm running the latest available update of Photoshop Beta (27.4.0) on Windows 11. Starting with the last 2 or 3 updates, the contextual text bar disappears at random times. I've tried the suggested ways of restoring it, but nothing works other than shutting down & restarting Photoshop. I've never had this problem until the last few updates.

I have just updatet the regular Photoshop to version 27.6, but the new generative Credits Usage panel. isn´t there at all. According to severel Youtube channels (Julianne Kost for instance) there is such a new feature, but there isn´t. Why?

Hi Adobe Team, I’m facing a small but very frustrating glitch in Photoshop, and I wanted to bring it to your attention. Whenever I’m using the Move Tool, and I try to switch to the Brush Tool by pressing B on my keyboard, Photoshop jumps to the Brush Tool for a split second and then immediately switches back to the Move Tool on its own. This keeps happening repeatedly, and only after trying 3–4 times does the tool finally switch properly.This issue is interrupting my workflow and becomes quite irritating, especially during long design sessions. I kindly request you to please look into this bug or guide me if there’s any fix or setting adjustment I should try from my side.

i can't find it. I turn it on and off view the "window" menu but it's no where to be found. I've opened and closed PS several times. 

Just like described in the subject, worked perfectly until I updated today and now the GPU fails.

ssue summary:Generative Text box not allowing text to be edited in Photoshop (Beta)Product and version:Adobe Photoshop Version 27.7.0 (Beta) – Build 20260422.m.3514 c691924 x64 (Public Beta)Operating system:Windows 10 64-bit (Version 10.0.19045.7184)Steps to reproduce:Open Photoshop (Beta) Open or create a document Use Generative Fill / Generative Text feature to create text Click into the generative text box Attempt to edit the existing text (type, delete, or modify)Expected result:Text inside the generative text box should be editable and respond to typing, deletion, and changes.Actual result:The generative text box does not allow any editing. Text cannot be changed, deleted, or updated.Additional notes:Issue occurs consistently No error message appears Photoshop does not crash, but the text field is unresponsive System specs: Intel CPU (10 physical cores, 12 logical), AVX2 support, 2496 MHz

merhaba son güncellemeyi yaptım arayüzler değişti özne seç çalışmıyor kişileri bulmuyor. 

I had Montserrat font installed and have been using it for a while. I installed Montserrat Alternatives recently. Now the original Montserrat font does not work in Photoshop. I have deleted both fonts from all locations… computer and cloud. Have reinstalled Montserrat, it shows up, but it acts like the alternative version.I have also deleted all my cache and temp files. This only happens in PS Beta. The font works in Word and CorelDraw.

Hello,   I’m experiencing a recurring bug in the latest version of Photoshop (Beta) on macOS.   When I add a Hue/Saturation adjustment layer, the Properties panel does not display the usual Hue, Saturation, and Lightness sliders. Instead, it only shows: “No mask selected” — even though the white thumbnail (the adjustment layer, not the mask) is properly selected in the Layers panel.   This bug does not happen in the stable version of Photoshop, nor in a different open document within the same session. Steps to reproduce: 1. Open or create a new document 2. Add a Hue/Saturation adjustment layer 3. Click the white thumbnail of the adjustment (not the mask) 4. The Properties panel incorrectly shows only mask options (“No mask selected”) System details: • Photoshop Beta version: 26.6.0 • macOS version: 15.3.2 • Chip: Apple M3 Pro

Hi All,I've tried dozens of ways to add new eyes to a male ballet dancer's face with generative fill and no matter what I try a message pops up telling me I am violating the guidelines. I'm at my wits end. I'll list what I've tried below and upload some images.  Does anybody have a 'workaround' or solution I haven't already tried? I'd really appreciate any input! Thanks so much!          Things I've Attempted to Stop Generative Fill from blocking Results:Updating Photoshop BetaCleaning all temporary files and cookies from my drive and restaring both my laptop and PSBetaMaking my selection area smallerPutting a period in the prompt boxBlacking out/covering almost all the bare skin in the image before using Gen FillUsing several prompt wordings: 'The eyes of the man' 'The eyes of the model' 'The model's eyes and eyebrows' Etc.Using 3 different reference imagesUsing no reference imageUsing a reference image and no promptUsing a prompt and no referen

some wires removed, but not all

Hi, I'm using PS Beta 26.6, and when I try using the "Parametric Filter" the only things that happens is that it:-Duplicates the layer-Converts to smart object. The parametric properties stays "blank" with the text: "Select a layer that contains a Parametric filter....". I've tried to reinstall the Beta, and I've tried resetting the preferances. What am I doing wrong?

Hi(and happy new year!) I can't find the Photoshop (beta) in my Creative Cloud Desktop.Under "Categories" I can see it all (... Video, Illustration, UI & UX, 3D & AR and Acrobat & PDF) but no Beta-category.... please see attached.Is this because I'm living in Denmark? Or do I need to sign up to the beta first?Kind regards, Jens    

Photoshop (Beta) 27.6 won't update. It generally stalls or fails at 40 or 41% complete. I have plenty of space on my C:\ Drive. I’m using Windows 10.I’ve tried rebooting and retrying 27.6 update. Fail.I’ve deleted the adobeTemp folder and retried installing update to no avail.I’ve uninstalled the 27.5 Beta and failed at reinstalling the 27.5 package.I reinstalled 27.4 Beta with success and updated 27.5 with success.Beta 27.6 update still stops at 41%.The error I keep getting is this._________________________________________________Exit Code: 127-------------------------------------- Summary -------------------------------------- - 1 fatal error(s), 19 error(s), 17 warnings(s) FATAL: Error occurred in extract of package (Name: AdobePhotoshop27-Core_x64 Version: 27.6.0.3475). Error code: '127' ERROR: Path:C:\adobeTemp already existsERROR: Failed to allocate buffer for file C:\adobeTemp\ETR7B37.tmp\1\Application\Photoshop.spd of size 665063036ERROR: Failed memory allocation after sleep al

Hello, I am having an issue with generative credits in photoshop beta. It says I have 250 credits remaining for my Photography Plan, but after trying the rotate feature in beta for 3 free times, I keep getting a pop-up stating I need to get credits. May I get support on this?

Hello, I am having an issue with generative credits in photoshop beta. It says I have 250 credits remaining for my Photography Plan, but after trying the rotate feature in beta for 3 free times, I keep getting a pop-up stating I need to get credits. May I get support on this? (Copy from other forum as I got redirected).

Hi Photoshop beta friends!   We have just added a new feature for the Move tool called "Hover layer bounds" to the Photoshop beta, and it is available to you now!   What does it do? This new feature adds the ability to mouse over an object on your canvas and show an outline of that layer. Additionally the corresponding layer will be highlighted in the layers panel. It also has additional function with layers with masks that display both the shown and hidden pixel data.   Hover layer bounds also works in the reverse direction as you mouse over layers in the Layers panel.   Hover layer bounds is very customizable; You can customize the color, thickness, and the Layers panel highlight color in Preferences > Guides, Grid & Slices and customize the behavior in the new Move tool gear menu in the Options bar.   We would love for you to give hover layer bounds a try! Please let us know what you think and how we could make improvements to this f