Questions

Hello, when I attempt to open photoshop, the splash page starts up, and it crashes from there, never opening the app propper. I have followed a few other tutorials for how to fix this, but haven't had any results. I do not have this problem with Acrobat or Illustrator, the only other two adobe apps I have installed. I have:1. cleared my preferences2. uninstalled and reinstalled photoshop3. uninstalled the current version of photoshop (27.1) and installed an earlier version of the app. 4. uninstalled and reinstalled my up to date graphics driver5. used the adobe cleaner to remove every app related to adobe on my computer, then reinstalling adobe creative cloud to start fresh6. changed my com.adobe.dunamis file to com.adobe.dunamis.old in order to have a new file created. If it is important information, I have used photoshop on this computer before and am aware that it works near flawlessly in the past. Whenever I open photoshop I try and make sure that no other or a minim

I love the brush modes, being able to paint in multiply, darken etc without creating a new layer is extremely useful. If this could be launched as a pop up window or incorporated within an existing window (Brush Settings or Contextual task bar for instance) to place it closer to the area you're working on would be a game changer. 

Why is CTRL F4 not down as Close in the list of keyboard shortcuts ? or preferences?Coz let's face it, that's what happens.  

hi there! i'll try to be brief with my problem: i am working on a poster series for which the entire type is rasterized in one single layer, some bits of it are blurred, but the blur is made with noise -- i have attached a screenshot. in order for it to look like in the screenshot, i've made duplicates of the layer -- in total i have four copies of it. if i leave just one layer, the type looks a bit flimsier.  when i export to pdf though it renders just one layer of type, it's like the others don't exist. if i merge all layers the same thing happens, it ignores the duplicate layers and the flattened image looks like it only has one layer of type. i tried making a new document and dragging all my layers to it but i encounter the same problem. what's weirder is that i made some other graphics earlier today from the same series and it exported just fine then.  anyone got any clues as to what this could be? 

I have used the both Denoise and Sharpen that is installed in the new update. They are disappointing and do not come close to what the original Denoise and Sharpen. I have been using both since they came out from Topaz several years ago. When I saw that they were imbedded in the new update I did a comparison. The separate program that I have used for years is far and away a better process. I saw little difference in the pic after it was Denoised with the new update. 

  ЗHello! Please help me solve this problem. I need to stretch an image strictly horizontally from the center to the edges (as in Figure 2), but Adobe Photoshop resizes the image from the "left" side to the "right" (as in Figure 1). Perhaps the problem is in the advanced settings; where can I find them?   [formating fixed by mod]

27.1.0 w tej wersji bardzo źle działa zaznaczanie -select subject. Albo baaardzo wolno się generuje, tragicznie wolno, albo na końcu wyskakuje błąd, że nie da się zaznaczyć...

I have been having this issue for a while, where I am unable to open or save as a file. I can make a New document tho. Anyway, when I try to Open Or Save as a file, I get a blank black page, and it stays like that, and nothing shows up. I tried looking this up, but it doesn't seem that anybody is having a similar issue. Can you please help me?I have attached screenshots of the problem.  

I have just spent another 1.5 hours with Adobe controlling my machine to get Adobe 2026 to print on a standard Canon TS8751 printer - all to no avail.  Their conclusion was that it is a Windows 11 problem - and not Adobe! - and that if I reinstall Windows it may cure the problem - but they were not sure.  I find it interesting that everything - including Photoshop 2024 - prints on this prnter but not 2026 - its Windows!

Hi everyone,I run a content site [removed by moderator] and I create a lot of visual assets in Photoshop. Recently I noticed that when I export images (PNG or JPG), the text and icons look slightly blurry on the live site, even though they look sharp in Photoshop. I’ve tried: Export As / Save for Web 72–300 DPI Smart Objects Different scaling settings If anyone has experience exporting images for WordPress blogs or high-quality web use, what settings do you recommend so visuals stay crisp on the site?Thanks in advance!

Bonjour.Comme d'autres utilisateurs, je n'arrive pas à utiliser dans Photoshop Gemini et flux kontext La barre de progression avance et ce stop avec le message d'erreur : "Votre administrateur système n'autorise pas l'accès à cette fonction pour le moment. Contactez-le pour plus d'informations." J'ai contacté mon administrateur, qui n'a pas mit de restrictions sur cet usage. Comment faire s'il vous plait pour pouvoir les utiliser dans photoshop.J'ai abonnement creative Cloud proMerci

Could I get a download link for Adobe Photoshop CC 2015? My laptop doesn’t have enough RAM and GPU power to run the newer versions.

Hi, I copied the presets folder from Macintosh HD/Applications/Adobe Photoshop 2025/PresetsBut the brushes folder contains only two files: legacy brushes and converted legacy tool presets. Does this mean that if Photoshop erases all my brushes again, I'll have to re-import them and the backup won't help me with that? Btw, if I need the back up, I will just move the files to the presets folder? Because I think it's dangerous to mess in the library folder unless you know what you're doing. It was a pain to find instructions about how to do the backup, because nothing is where it was. I wish Adobe made backups easier, I don't dare to update because last time I did Photoshop reverted to factory settings and I don't remember it being a major update, either.

How can I make this "Objects" selection open in a separate flaying window? drag & drop does not work.  

Quando eu aciono a ferramenta de Pincel, Borraça ou de seleção, ela cria uma linha como se eu tivesse com o Shift selecionado, clicasse eu um ponto e depois no outro ponto e criasse assim uma linha. Não estou com o Shift acionado, o que pode ser?

Hello, I've had this problem for probably months now and I always hoped a future update would fix it but unfortunately that hasn't been the case, so here I am. I usually draw with Pen Pressure opacity enabled, though I'd love to finetune the sensitivity of it by adjusting the "Minimum" slider in the Brush Settings. Whenever I do so however, it doesn't work and the minimum slider snaps back to 0% once I draw my first stroke. I know I could just adjust my Wacom settings instead, but because that'd cause the pressure sensitivity to change universally across all my other settings (brush size for instance), that fix doesn't work for me either.  Sorry its a bit hard to explain, hopefully this gif provides more insight. Help would be much appreciated, thank you!I should mention this is Photoshop v26.11.2, though I recently upgraded from v26.11.1 and its already been an issue then as well.  

I tried to jump in what I wanted to do but it didn't work.

Wenn ich aus Photoshop drucke, erscheint neu als Standart "Farbmanagement durch Drucker". Manuell muss ich bei jedem Bild auf "Farbmanagent durch Photoshop" klicken und das ICC Profil neu anwählen.  Weiss jemend, wie ich "Farrbmanagement durch Photoshop" als Standart festlagen kann? (Früher war das so)Danke.

Photoshop 2025 (version 26.11.1) will not open on my Macbook Pro 2019 with Intel UHD Graphics 630 and 16GB RAM on MacOS Tahoe 26.1.I tried with PS 2021 and same problem. On opening I get about 1 second flash of Photoshop opening credits and then crashes.Any advice appreciated 

1 yıllık ücretsiz kullanımı kullanabilmek için chrome eklentisini yükleyip kurdum ama abaşlamadı ne yapmam lazım

GPU Acceleration RequiredCamera Raw Requires Graphics Acceleration to Edit Photos.im Update and Download install New Version All Settings ProperlyBut Still Camera Plugin in Work Time Suddenly Hang And Close Automaticallycome some Error Msg Like GPU Acceleration Required.Please Give Any Solution as Soon as Possible 

WHY  [cursing removed] CANNOT ADOBE ADD "UNDO LAST TOOL CHANGE" I make the absolutely horrible mistake of touching the wrong key, don't know that I did that, can't figure out what's wrong, don't know what to Google for and the apparent Adobe attitude is, "You should know better."

Bisher nutzte ich im Bereich Photografie einen Regler per Maus,mit dem ich dargestellte Fotos einfach zwischen 0% und 100% vergrößern konnte.Den konnte ich auf der rechten Fensterseite finden und öffnen.Diese Option ist in der neusten Version nicht mehr vorhanden.Wo kann ich diese Option jetzt finden?

I've been using a combination of the latest version of Photoshop and Photoshop 2019 for output sharpening via the free Google Nik Collection (which isn't compatible with more recent versions of Photoshop) on a PC for several years, but when I download Photoshop 2026, both Photoshop 2025, and 2019 versions of Photoshop were uninstalled from my system, and when 4 days later I tried to revert my system to an earlier point in time using system restore to get them back the only option I got was a revert back to before a Windows update from 2 days earlier that was after Photoshop 2019 had been removed. I've since discovered that Photoshop 2019 can no longer be download from Adobe like I had after previous Photoshop version updates, so as far as I can see I've now got two possible options to get the Nik out sharpener back.  I can either pay DXO £119.99 for the full Nik Collection 8 which seems steep as I'll only be using a small part of that collection, or revert my system back

It would be very helpful to have an option for ACR edits carried out on a Smart Object in Photoshop to update back to any source RAW file/s in LrC. It would also be useful to be able to do it the other way round, i.e. to update a source file in LrC and have it update in a Photoshop layer if embedded in the PS file as a Smart Object (ie similar to the way source files used in InDesign will update inside InDesign if edited in another app). Use case: photographer edits a series of DNGs in LrC, also needs to edit some of the series in PS. Opens file as Smart Object in PS; adds some other elements (eg head-swap from same series); realise other elements on Smart Object layer needs editing to look right, so double click Smart Object to edit in ACR, then save file back to LrC. Realise this treatment is better for other images in series and want to copy to other RAW files, but can't because source DNG layer edited in ACR does not update source file in LrC. It would be equally use