Questions

현재 M1PRO MAX 4TB 64GB 를 사용중입니다.포토샵으로 RAW 파일 작업을 진행하면. 갑작스럽게 램사용량이 140 - 170기가 까지 치솟아서 포토샵 모든 기능이 모두 멈춰버립니다.결국엔 강제종료를 해야하고. 작업한 파일들은. 다 날라갑니다.이로인해서 현재 작업하고 날린 사진들만 5천장이 넘어가고 있습니다.이전 버전까지는 저런 큰 문제는 없었으나, 어느 버젼부터인지 정확히 모르겠으나.저렇게 램 사용량이 증가해버리는 바람에 앞으로 작업을 다른방식 혹은 다른 프로그램으로 해야할지 고민이 많이 됩니다.혹시 방법 아시는 분 있나요? 참고로 performance 에서 램 사용량은 70% 로 해둔 상태입니다.

Hi. I want to move Photoshop Installation from disk C to D but the 3 dots in the upper right corner are not available in Windows Applications Panel . That is to say that Photoshop may not be installed on another disk than C ?

Started my Windows 10  PC this morning. I was not running Photoshop but think it was automatically trying to do an  update as it came up with an error report which I submitted.Now Photoshop will not run I get the message 'The code execution cannot proceed because LibXPUInfo.dll was not found. Reinstalling the program may fix this problem.'Can anyone over advice. Do I reinstall or is this a windows issue, if so how is it resolved?Thanks

hello. I'm having difficulty with the keybind for the [Brush to Eraser toggle]. I'm using Photoshop CC 2024 on Windows and no matter what key I set the keybind shortcut to, it just doesnt work.At first i thought it may be because I'm using a special character for the toggle, so I changed it to the letter 'm' and yet it still doesnt work. I've tried searching for answers but everyone is using the Tilde key on default for the shortcut. but I did not have that on default, and when I to change it to the Tilde key, it shows an error.   I then tried to change an existing shortcut keybind, The [Brush] shortcut, just to make sure that it isnt an issue with me manually setting keybinds. But even as I changed the [Brush] keybind, it works, so the issue isnt me changing the keybind.   Another solution I've seen other people give is to check the [Spring-loaded Tool Shortcuts] and I have that enabled already.   I'm at a loss of what to do. If anyone can help,

I am working in Photoshop 26.5 (MacBook Pro, macOS Sonoma). I have made a selection and want to create a layer mask with the selection in it. When I click on the "add layer mask" icon in Layers nothing happens. Any assistance or information would be appreciated.

I can't open files.Error: Could not repeat your request because of a program error.- Deleted preferences folder.- Updated Photoshop- Uninstalled Photoshop- Installed PhotoshopI need to work, not troubleshoot Pshop.- - - - -Adobe Photoshop Version: 26.5.0 20250318.r.16 0a154be x64Number of Launches: 242Operating System: Windows 11 64-bitVersion: 11 or greater 10.0.26100.3476System architecture: AMD CPU Family:15, Model:1, Stepping:2, AVX2, HyperThreadingPhysical processor count: 8Logical processor count: 16Processor speed: 3793 MHzBuilt-in memory: 32692 MBFree memory: 20956 MBMemory available to Photoshop: 25129 MBMemory used by Photoshop: 70 %Crash Handler: AdobeDCX Version: 8.20.0SAM SDK Version: 12.1.1ACP.local Status:- SDK Version: 5.3.0- Core Sync Status: Reachable and compatible- Core Sync Running: 7.4.0.31- Min Core Sync Required: 4.3.66.28Live Edit Client SDK Version: v5.0.0-beta.11Adobe Firefly: Please use any generative AI feature to view the latest version.OpenColorIO version

Hola.Quiero usar Adobe Color Themes. Se que se activa desde Ventana > Extensiones (heredadas) > Adobe Color Themes. El problema es que al ir a Ventanas, la opcion Extensiones (heredadas) no aparece. Revisando me fui a Prefererencias > Pluggins y note que hay un apartado llamado "Extenciones heredadas", en dicho apartado hay dos casillas para marcar, "Permitir la conexion a internet de las extensiones" y "Cargar paneles de extensiones". no puedo activar ninguba de ellas. No se si ese sea el problema pero necesito ayuda ya que la herramienta Adobe Color Themes es fundamental para un curso online que estoy haciendo. Tengo una Mac mini M1 macOS Big Sur version 11.3 y Photoshop version 22.4.2 Esto es en Prefererencias > Pluggins    Gracias.

Hello,   I am using the PS 22.1.1 version and when I try to save for web I get the error. "Adobe Save For Web Error A write permissions error has occurred "    Any help?   {Thread title edited by Moderator}

Had to reset my PC twice and now my serial number has been revoked. I have no idea what to do. I bought photoshop cs6 back in 2012 ish and use it to do art. Does anyone know how to fix this? If not, will adobe be able to fix this if I contact them? Thanks all!  

Is there a solution for the debug.log file that is created when opening a file in photoshop from the desktop?

What system specifications are recommended for editing files with 1200 layers, size around 11000 x 3000 pixels in Photoshop?

Hi guys!I was wondering if Photoshop has a tool for adding hyperlinks on my iPhone or Samsung Tablet to photos? Any information appreciated!😃

Hello, I have a problem with my Adobe account and AI in Photoshop. I have a 20GB Photography plan, but in Adobe Account there is a message: "Unable to load section. Try again". AI in PS does not work, a message appears "Check your internet connection and try again". Everything except AI works fine, I have all the latest updates via Creative Cloud.I didn't need AI before so I didn't look for a solution, but now I need it. Please help.Best regardsHubert

Hi, I've uploaded the latest version of Photoshop CC and am going though it to refresh my skills.  I cannot figure out how to collapse the layers.  I will group 10 layers and create a new group from layers, which it does.  But the arrow icon to close or open the layer has no effect.  They remain open.  I click on the arrow to close the layer group and nothing at all happens. Very frustrating.  Is this a bug?  I've read all I can, but it simply doesn't function.  I turn off "auto select" and turn on "group" - and the group will move together.  But in the layer's panel, all layers remain open so what's the point of consolidating them to make the layer panel manageable?  It's not if this feature is missing.  Thanks for any clue you can give me.Regards,Darlene Seale

Impossible d'effectuer cette opération car votre ordinateur ne fournit pas les jeux d’instructions AVX et AVX2 requis pour traiter la vidéo.Je suis sur Apple OSX (le dernier) sur un MacBook Pro M4Voici le mesage que j'ai en esayant d'importer des vidéos dans photoshop. Pire que cela la fonction ajouter un calque vidéo et importger de svidéos enc alques vidéo sont grisés... En enlevant le demmarage par ROsetta je récupere l'option mais je n'ai plus acces à ma Animation tool Bar Pro... Je tourne en rond avec l'un ou l'autre mais pas les deux... Mais surtput plus de possibilités d'impirt vidéo à priori en raisond es jeux d'instructions AVX et AVX2...Comment y remédier.Merci à vous de cette aide me permettant d'afiner es formations ur Photoshop.

Hello everyone, I need a little help &#x1f605 I want to open the Save As dialog via Extendscript with the default settings TIFF and LZW.Unfortunately, I always have the problem that Photoshop does not remember the new path and when I save the file again later, the file ends up in the old path.?In addition, it would be nice if the dialog always opened in the last path in which I saved. so actually like when I use the normal Save As dialog from Photoshop. I hope I was able to explain this clearly and you can help me? Many thanks in advance 

I went through the trouble shoot; closed PS and deleted my photshop settings folder and then relaunched. That let me open the file again, but after closing the program and reopening, AGAIN it said there was a program error and could not open. Anyu help would be great

Good Afternoon Everyone, I been having issue with my photoshop after updating it to the last version every time I try to use my remove tool or quick selection it just crash and it pop out a report window does anyone know what do I have to do to fix that isssue ? I have a Dell Microsoft 11 pro. Thank you.

so I use the newest update of photoshop CC and I'm having a lot of trouble.for no particular reason, about a week ago, an error message would pop up when I tried to work with layers. I uninstalled and reinstalled (and updated) photoshop and that bug went away. now whenever I use any tool, the icon for that tool will show up, but it only works as the hand tool. I have tried cleaning my spacebar vigorously, but that did nothing. the brush tool with works if I draw a horizontal line, but that is it. I have reset all tools and restarted my windows 10 laptop countless times.I use photoshop for art and animation and occasionally simple projects for school- things that could be make in MS WordI am not an advanced user, and I've been using photoshop for a year.please help???

I am having a difficulty with the Automate batch function in Photoshop. I don't want to use image processor because I need to upsize images with the new Preserve details 2.0.  I create an action: 1 from an open image resize 200% saves as and close.Before I went to the automate batch option I could select the source folder and the destination and it would work perfectly.No more now.I always get this message "There were no source files that could be opened by Photoshop". it is quite an absurd message as I point the source to the folder that contains the images. I know that I have not recorded the open image in the action but this was never necessary as once you selected the folder in the automate batch as a source it would open those files inside and run the action.Has this changed now? I have tried "supress file options dialogs" but same result. Is it now compulsory to also save the open file step so that the automate batch runs correctly the action?. I really think this

Bonjour, Je désespère car à chaque mise à jour de PS / PS Beta, je perds absolument tous mes paramètres : espace de travail, préférences, menus, raccourcis, etc. Ainsi que mes actions, formes et pinceaux personnalisés :-(((Ca devient insupportable... J'ai donc pris la précaution d'enregistrer mon espace de travail mais lorsque j'ai voulu le charger une fois la maj effectuée, ça n'a pas fonctionné et j'ai reçu le message d'erreur suivant : "Impossible de charger le fichier d'échelle de mesure prédéfiie par l'utilisateur car Photoshop ne reconnaît pas ce type de fichier"Quelqu'un a-t-il une idée de ce qu'il se passe svp ? 

Thanks to all who took part in our last rocky terrain challenge. It was great to see the different ideas and approaches to bring that scene to life.   I post this new challenge on March 14th which happens to be Pi day (3.14......). So I thought we should honour this remarkable number, which has been calculated to trillions of decimal places, by using its Greek symbol as a starting point. What can you make with it?   The “rules”: Use the starter image as at least part of your own image entry. Anything goes, as long as it meets the forum rules on decency, copyright, etc. Anyone, and everyone, is welcome to have a go, whether you are a complete beginner or a Photoshop expert. This is not just for our forum “regulars”. There are no prizes apart from the chance to practice, show off your skills, or bring a bit of humor and fun. Don't be shy, join in and have a go! The starter image is made available for you to use in this forum challenge only.   To download the starter

Using V:26.5. Trying to dl betas. Looked at some tutorials but can't find what I need in the cloud. Sure I'm missing something simplse. 

Hello, I'm usually opening a large amount of images from Lightroom in PS as layers.Recently, it has become possible to open a stack of images as smart object layers - ideal for getting back into the RAW data.Since files from LR aren't linkd, but embedded, it would be rather cumbersome to open the smart objectcreate a CR presetapply the repesetopen the next layer etc etc etc for up to 120 times. Is it possible to batch-edit smart object layers like that? Create one CR preset and execute it on all smart object layers automatically? The only other way imaginable to me would be to apply adjustments to the files in LR and then "replace content" of the smart objects, which would be equally cumbersome. I would even purchase a script if it's possible to do this. An action won't go anywhere, because CR halts the process waiting for input.

I am having a very annoying issue with the wacom pen on windows 10.One of my pen buttons is set to pick existing color from the canvas. But every time I click and drag holding the pen button, I experience an initial drag.So the color is sampled first time which I click on the canvas (holding the button). But when I drag the pen to sample adjacent color it does not pick the new color. Only after significant movement it starts to sample new color as I move the pen.Hope this was clear. Appreciate any help on this as this becomes very annoying to work with.Thanks!