Questions

Adobe Premiere v 25.5.0 Build 13Mac OS Sequoia 15.6.1Recently updated to both of these versions and I notice a couple things:1. When I add effects to the timeline now, pressing the Return key does nothing. It used to render the effects.In order to render now I have to go to the Sequence menu and select "Render Entire Work Area".2.  After rendering, the timeline turns green and the entire video plays as it should, but when I export it jitters and freezes at certain points in the playback.  In some cases this is where transition effects were present but in others it was just straight cuts.  And the transition effects are basic wipes and dissolves.My main concern is getting the file to export cleanly and play back the way it does in the timeline.  Any insights on this as well as why the previous method of rendering no longer works?UPDATE:  I was able to export a clean version using ProRes422.  The error is occuring when I try to use H.264 with the Match Sourc

Each time I do an edit on a clip with "Enhanced Audio" from the essential graphics panel, Premiere has to re-analyze the entire clip, process, and then allow me to hear it correctly. Previously, I would upload to https://podcast.adobe.com/enhance - yes it was an extra step but I never had to worry about this issue as I was working with an audio track as expected. Premiere should not need to re-process constantly, and the more I cut, the more time-consuming and frustrating it is. Was this an oversight? Is there a way around this?

I'm recording some online classes with Snagit. I usually go for full screen but it's not always the same dimensions and in any case my teacher wants me to give the recordings to him at 1280x720.The challenge in knowing what to create for a PPro sequence is that Snagit chooses the frame rate and it randomly changes with every new recording (as do the dimensions just depending on how I select the area, but it's always more than 1280x720).I can easily scale and position the video to fit a 1280x720 sequence if that's the specs I give the sequence when I create it, but it's a little challenging to have the sequence match the frame rate of the mp4 that Snatit creates. Well, it's not challenging if I create each sequence manually by first checking the frame rate of the mp4 Snagit created. It would be nice to be able to create a sequence preset that I use every time, but I'm not seeing a practical way to do that.If I tell PPro to modify the sequence specs to match the video I'm placing, it mod

After purchasing Adobe Film Impact, the typewriter transition stopped working. The text just appears immediately instead of smoothly typing letter by letter. Everything looks fine on the timeline, but when exporting by media encoder, there's no effect.

I've been exporting with the TMPGEnc plugin for Premiere Pro for a couple months now (I paid for it).  However, today I noticed that almost all of my resulting mp4 files have audio drop-outs, starting about a second in.  There will be a second of audio, then silence for several minutes, and then audio will come back. Here is an example, where the audio disappears after 1 second and then comes back at 12:48:https://www.youtube.com/watch?v=_J6HgWIJnok Here's another example, with audio disappearing a second or so in, until 14:55:https://www.youtube.com/watch?v=iOWmjDIvrLs The same videos, when exported with Premiere Pro's normal CBR 100 (not TMPGEnc), both have perfect audio. I am getting the same problem over and over, on all of the 4K@60Hz videos I've exported with TMPGEnc since 28 November.  Videos before that didn't have the same problem, except I remember last year when I trialed TMPGEnc (on a different computer) I experienced audio drop-outs, but

Hi there, I am apparently unable to add media to a media placeholder in the properties panel of a MOGRT. When I drag and hold the media over the placeholder, the hand shows a stop sign underneath, as if this is not how I'm meant to add it. How am i meant to add media? I am experiencing no lag or crashes so I am wondering if there is something glaringly obvious that I am missing. Any help or advice would be greatly appreciated. 

Dear Community - please help! When I use Enhance Audio on my clips it adds audible 'gremlin' artefacts to the clip. They are not always visible on the waveform but here is an example where it is visible. The first clip uses no enhancement, then I set it to 2, 4 and 7.  In this particular case, it would appear to be trying too hard to amplify/improve barely audible background noise or mic rustle as it gets worse the more I 'enhance' the audio. But this is the very opposite of what the effect should be doing, surely it should be squashing wind, rustles, noise? This has also happened over spoken/ambient audio, and not affected the waveform - which is scary, as they are not always picked up in review! This is happening over multiple Macs and always on the latest version of PP. The error is repeatable using completely fresh projects, sequences and clips. I have had to stop using Enhance Audio for fear of missing some of these glitches and them going live.&

Buenos dias a toda la comunidad, tengo este problema con adobe premiere Como verán, la forma en que se reproduce el video al editar es bastante extraña, yo podía arreglar este defecto reinstalando el controlador de la placa aceleradora de video (una nVIDIA RTX 3060) pero desde que tuve que formatear mi disco y reinstalar Windows 11 (por un problema no relacionado) ya no me sirve esa opción... alguien puede ayudarme?  Gracias

I have recently shifted from FCP 7 to Premier Pro 24 and that too from Mac to Windows. Now, I have found a .Kys file to use the fcp7 shortcuts into premier. But perhaps that .kys file was mac only. Not working in my Windows version. Can Somebody provide me with a link to download  a .kys file, so that I can use FCP7 shortcuts in Premier 24 Windows version. 

PowerPoint v16.98Premiere Pro v25.3MacBook Pro M1 Max chipMac Sequoia 15.7.1 I'm using PowerPoint to export slides as a MOV using Apple ProRes 4444 and I have checked the 'Make background transparent' box so that I can have 'floating' animations (made in PPT) next to a webinar speaker. When I go to import that mov into Premiere (either by dragging, File -> Import, or using the Media Browser) it doesn't let me import at all. I get a File Import Failure popup with the error message 'We were unable to open the file on disk'. The Event details tell me 'File contains more than one image descriptor'. There aren't any further settings (as far as I know) that I can change when exporting from PowerPoint - literally choose the file type, codec, and switch on transparency. I can't import the mov into After Effects or Media Encoder, but I can open the mov fine in Quicktime and see the alpha transparency. The problem is - I used this exact workflow in June this year, and I didn't

When I import my footage into premier pro, I have it so it automatically transcribes dialouge for text based editing. When working in the bins, I typically cut up the footage into usable parts and organize it into other bins. Text based editing works flawlessly here everytime.  The issue: when I drag the clips into a timeline, the transcript for text based editing no longer appears in the text panel OR its super wonky, i.e. when I select text to delete it isnt synced up and deletes the wrong section or just deletes then text and doesnt effect the timeline. In my current project, its the first issue were the transcript isnt pulling into the timeline. Re-transcribe is blurred out too which makes me think this could be a settings error? Anybody getting the same issue?

When I used Premiere pro 2024, during editing clips, the pre-rendering time of individual shots took a dozen seconds (qucik process mostly use after slowmo effect). When I rendered the project in its entirety to an HD/4k file - for 8 minutes of material it took 1-2 hours.  After the update, ( I didn't change anything in the computer software), the same operations take several minutes for a simple pre-render and even 13 hours for export to HD/4k movie (8 min movie) It's impossible to work this way. The thin bar on the timeline is still red and somehow forces me to pre-render all the time. What shoul I do?

somethings wrong. I think I accidentially changed the settings of my Adobe Premierebecause I cannot find the motion effects in order to change my scale.The only thing I see in my Effects are the color/light effects but not my motion effects.

I need the ability paste timecodes into a text box such as:00:13 - 00:2300:25 - 00:3300:43 - 00:48and then I need PPro to make a cut at each point of the current timeline, and then to use one colour to label the new cuts in the timeline.Is this possible? Where do I find a tool that can possibly do this already, or where can I find a dev ask what it would cost? I researched the new UXP Dev Tools to try and vibe code it myself but realize that an interface isn't possible with UXP. I'm not sure how extensions work or are coded, perhaps that's what is needed. 

Hello,Recap problems during post production of large tv showLast year the post production process for a serialized tv-show within Premiere Productions turned into living nightmare, because it seemed like it couldn't handle the amount of imported footage, coming from all sorts of different sources: Sony camcorders, such as the PXW-FX9, GoPro's, drones, phones etc, all using their own specific codecs and color spaces. XAVC, Rec. 709, Rec. 2020, Sony S-Log3/S-Gamut3.Cine, D-Log etc.Even though the projects were set up in XDCAM50/1080p, some footage came in at UHD or 4K. Some footage came in, being converted to ProRes.We're talking about 10 episodes, 14 days worth of footage, and all being accessed all day, every day, for about 5 weeks by several editors on multiple 10GbE iMac machines. As for the separate projects within Productions: one containing all the raw footage, one for converted videos, one for music, one for assets, etc, and one for each episode. Each episode project basically co

 As you can see, I am trying to change the media in the properties panel, and it is showing up as blank in the actual video. It is getting super annoying, and nothing is working.

I subscribe to Adobe Premiere Pro, but in my Adobe Premiere Pro the object masking feature doesn't appear. What's the solution?

 I've been rendering with Premiere for a time, like rendering 1080p60 for some time and changed to 1440p60 since I've bought a new hardware device to capture my gameplays. Some render times were around 2 hours, for a 1h30m video using H265 Codec to record and render. Recently (like 1 or 2 month ago), Premiere started to take too much time to render videos with similar length, like 6 hours to render a video with 1h40m, and also a 2 hours video took 8 hours to render it. My setup is: CPU Ryzen 5600X GPU NVIDIA RTX 4070 32GB RAM (Premiere can use up to 26GB)   My export settings is like this:   One thing that keeps me thinking is this option "Render" that keeps to stay grayed out and I can't changed it. I've looked through some topics and videos, and I couldn't turn it on. I've looked that Adobe have disabled it, but I guess during the render it isn't using my GPU/Hardware and is rendering through Software to take so much time.   Edited for content: Content was

Ever since updating to the newest version of Premiere Pro (24.4.1), it continuously crashes. It happens when I try to do pretty much anything on any project. I tried:- deleting media cache folder- deleting and reinstalling entire application- reverting to previous version of Premiere- creating a new project and importing existing project into it Nothing works! I use this for my job and need it to be fixed ASAP so I can actually do my work. Here's what I'm running it on:Processor AMD Ryzen Threadripper 3960X 24-Core Processor 3.79 GHzInstalled RAM 64.0 GB (63.9 GB usable)Device ID 60128F8A-2A6F-41D3-B09D-9C693AD67935Product ID 00330-71290-00002-AAOEMSystem type 64-bit operating system, x64-based processorEdition Windows 11 ProVersion 23H2Installed on ‎2022-‎09-‎21OS build 22631.3593Experience Windows Feature Experience Pack 1000.22700.1003.0

After using the eyedropper to select a color area in Hue vs Sat in Lumetri Color, I am not able to adjust the saturation.  Mouse selecting one of the control "dots" does not work.  On rare occasions I can actually get it to work by randomly selecting other controls first.

Issue - The markers (comments) marked on the timeline in Premiere Pro are not getting uploaded as comments on Frame.io Adobe Premiere Pro version number - v23.3.0 Build 61 Operating system - Windows 10 64-bit (22H2) System Info:CPU - Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHzGPU and Driver version - NVIDIA GeForce GTX 1070 (Studio driver version - 531.61)RAM - 32.0GB Dual-Channel DDR4 @ 1200MHz (17-17-17-39)Hard Drive(s) - 931GB Crucial CT1000MX500SSD4 (SATA (SSD))   --OS SSD, software installed here.                                                                                                                       Footage/source is present here.

I'm working in a project with sources with mixed frame rates.  The source timecode in my EDL is often off by a few frames, sometimes seconds.  Is there a best practice for exporting mixed frame rate EDLs?  Thanks so much!

I've been attempting to record multi-channel audio with PCM through OBS. Here are my settings:I set it to record 2 audio channels  Whenever I import the resulting file, premiere only ever acknowledges the first audio track it finds.Please note, that when I change the audio encoder to FFMPEG AAC, it all works perfectly and both channels are detected. This issue exists inPremiere Pro 24.2.1 (and before)Premiere Pro (Beta)  24.3 (and before) I've tried all other container formats with and without remuxing in OBS, the results are the same. Whenever I use multi-channel audio with PCM, premiere just ignores them. I've attached a sample recording that has 2 audio channels recorded with the settings above. Everything esle (other players) is able to recognize them aside from premiere.

I need to link files from my Dropbox folder, which by default is located inside my C:/Users/Library/~ folder. Premiere's Locate window simply cannot access that folder. I can see it on the Locate window, but can't click it, double clicking it does nothing.I've already tried to change sharing settings, with no success.

I've attached a recording & have attched one image two times Have applied the video effect however the it is just turning black & zooming in - is this having any issue? You can see the video here: https://drive.google.com/file/d/1v9fB1Y0WEQTF1dlzcKZ8Exm0HQy39Mqw/view?usp=sharing am using mac air m2