Audition

Adobe Audition 26.3.0.79 on macOS 15.6.1 (24G90), Mac Studio, Apple M4 Max  Open a mono audio aif file  Go to menu Window > Amplitude Statistics Click “Scan Selection”Result: The number format of all amplitude values is rendered totally unreadable (see attached screenshot)Regression:Since I am using the Amplitude Statistics quite regularly, I assume that this bugs was introduced recently.[Moved to Audition by a moderator］

To reproduce:Open "Delete Silence" tool and select some sane thresholdsSelect ~60 min or longer of audio and click "Scan"Detected silence segments include long sections of audio, as if the thresholds were invisibly changed. The number of segments detected is also much smaller than it should be.If you reduce the audio selection slowly (e.g. from 60min to 50min, then 40min, 30min, etc.) and scan at every duration, at some point, it will start working correctly again. Number of segments detected goes from something like 26 to 498 when I shorten the duration from 34min to 33min. This makes no sense, because it longer duration must have more segments.From the behavior, it seems like when more than 500 segments of silence are present, it gives the wrong result.

I’m running Audition on a powerful computer - 9900x 12 Core processor, 64 GB DDR5, Samsung 9100 NVMe SSD, Windows 11, etc…  The Windows, Creative Cloud, and Audition installations are clean and updated, as are all drivers, etc.Audition takes close to fifteen seconds to open the first time I run it after startup or reboot.  After that, it opens almost instantly.  I’ve performed a Shift startup which resets everything, and a full uninstall/reinstall.  I’ve also cleared the cache.  The issue remains.Any ideas?

Adobe Audition's Delete Silence feature doesn't understand the concept of silence or sound in hour long audio clips. It'll scan and leave me with basically the entire track set for deletion. (FTR, defining silence "For more than 2000" does work, but it's not ideal since it leave a lot of silence that you would otherwise want gone). 2026-07-18 

Why does my Amplitude Statistics look like this? I have so many numbers showing  in Peak Amplitude and I can’t see them all? first screen shot.Training videos always show this number as something like this, second screenshot.The file is in Mono.

Audio CDs have served creators for decades, but the way our customers deliver and distribute audio has fundamentally shifted. In an upcoming release of Adobe Audition (25.3) , we will be retiring the application's built-in CD authoring features. Going forward, customers who need to create audio CDs can do so by exporting their finished audio from Audition and burning it through their operating system's native disc tools. This change reflects how production workflows have evolved. The vast majority of today's deliverables are streaming masters, broadcast files, podcasts, video soundtracks, and digital downloads. CD delivery now sits well outside the day-to-day output of most Adobe Audition users, and the disc burning tools built into modern operating systems already handle the small remaining set of cases where a physical audio CD is required.  What is being removed?The following CD authoring features will no longer be available in Adobe Audition: CD Layout view: The panel used to assem

After choosing a time frame, scanning it through frequency analyzer window and then clicking copy all graph data, when I pasted I just got one row with 4 cells containing Freq, left, right an mean (it’s a stereo WAV). All data are just not transmitted. I fixed this issue by downloading an older version, so I believe it’s a new problem.

We're seeing an issue with registerKeyEventsInterest() on macOS in an Audition CEP panel.On panel initialization, we call __adobe_cep__.registerKeyEventsInterest() for all relevant key codes (including metaKey) and handle Cmd+C/V/X/A ourselves (execCommand() / navigator.clipboard) . This works correctly, we able to copy and paste the text inside the panel.However, after the user performs a Copy operation inside Audition itself (e.g. Edit → Copy or Cmd+C on a clip), the panel stops receiving Cmd key events entirely. Clicking back into the panel or re-focusing an input doesn't help.Is this expected behavior? We don't see this issue in other Adobe applications, such as Photoshop and Premiere. Is Audition expected to behave differently? OS: MacAudition version: 2026Plugin framework: CEP 

Since my update to Audition v 26.3 the Amplitude Statistics display shows my display has changed to show more digits than before, changing from 2 numbers after the decimal point to 15 numbers after the decimal point. I can't seem to change it, very annoying as I have to stretch the column width open to see the first digits before the decimal point, plus it won’t keep the column width every time I go away from it. 

Hi everyone — I’m editing/mixing a film in Adobe Audition 5.1 after sending my Premiere Pro sequence to Audition, and I’m running into a major issue where Audition is not properly reading some of the audio files, especially music cues.The files play normally in Finder and in other apps, but inside Audition they either won’t open correctly, show no waveform, or appear as extremely short clips. In the Files panel and Properties panel, Audition is showing these WAV files as having 0 duration, even though the source audio is several minutes long.The files appear to be standard WAVs:Sample Rate: 48000 HzBit Depth: 32-bit floatFormat: Waveform AudioChannels: mono or stereoThis does not seem to be a simple 44.1/48 kHz mismatch, because the project and files are both 48 kHz. The issue seems to be that Audition is interpreting the source files as empty or zero-length. Many of the problematic files are Premiere/Audition-generated “Extracted” WAVs from the Send to Audition workflow.I’ve tried exp

In Adobe Audition 2026, two microphones are plugged into separate inputs on an M-TRACK DUO with two audio tracks on separate channels, output via USB to Audition.  The tracks show up on the editor and volume meters, but I cannot hear the audio  through the headphone jack on the M-AUDIO or on the Mac Studio.  All levels have been set correctly, and Audio mapping and hardware settings are correct (see screengrab).  This configuration has worked fine in recording sessions and playback, but suddenly does not.  On a deadline;  PLEASE HELP!!Thanks VERY much. Rob

Adobe Audition recording frequency cutoff at 11-12 kHz — Audacity on same setup records full 20 kHzSetup:Sennheiser MKH 416 → Apollo Twin X Gen 2 → Adobe Audition on MacThe problem:Frequency analysis in Audition shows a hard cutoff around 11-12 kHz. Audacity recording through the exact same Apollo Twin shows full frequency response up to 20 kHz. The problem persists in Audition regardless of settings.What we've already tried:Verified sample rate is 48000 Hz in Audition, UA Console, and export settings Switched Apollo input from LINE IN to MIC IN with 48V phantom power enabled Removed all UAD plugins from the channel strip completely Turned off LINE INPUT GAIN in Apollo hardware settings Changed I/O Matrix routing from AUX1 L to MIC/LINE/HIZ 1 Turned off the high pass filter on the Apollo channel Reset Audition preferences using Ctrl+Alt+Shift on launch Manually deleted Audition preference files from Library folder Fully uninstalled and reinstalled Audition including removing preference

See this discussion. Just thought it should be a bug report, not a question!….and I meant far, not for..argh!

Hello. Does anyone have the Adobe Audition 2020/2021 version available for download? My operating system is Windows 10 Enterprise LTSC 1809 (2018) Build 17763.1. Thank you very much!

Does anyone know how to change the numeric decimal places in amplitude statistics back to normal? Mine changed out of nowhere to really long format and I cant get them back to the way they were or default. Thanks./ 

I've already seen this question asked but it was a post five years ago and apparently it still hasn't been addressed - why not allow saved presets in the save as dialogue box why should I have to keep changing every recording that I'm making (or that I'm editing) only in the WAV format. I developed or tried to develop a workflow of duplicating a .m4a file, selecting all of the audio, deleting the audio, recording a new podcast with that duplicated file name, and then hoping just to do command us to save still in the .m4a/16 bit format that the original file was in. But no. Audition really wants to make everything a WAV file or to force me to make multiple menu selections so that I can save as .m4a - which in the situation that I tested today was the difference between a 50 minute record recording that would have taken up 560 MB as a WAV file versus only 100 MB as a .m4a file… but I had to go through the process of selecting a different file type and then a different bit depth and then

This is a problem that has persisted for a long time now, and it’s so frustrating.  I do a lot of work in waveform mode, cleaning up narration audio, and what always happens within a few minutes of starting, the audio begins to crackle.  This does not effect any audio or video outside of premiere, but while working with the audio it sounds like an old record player.  This is not an intrinsic quality of the audio itself, but something happening during playback. I am using Windows 10, an AMD Ryzen 5 3600 6-core CPU, and GeForce 4060 Ti GPU. I have 64G of DD4 RAM, with less than 30% utilization while using Audition, using only about 18G with a 46G cache. While using the program I have 52G ram reserved for audition, using an SSD with about 160G free space as primary cache. In Task Manager, audition is only using about 200M ram.  CPU usage is negligible. So I can’t imagine that the problem is with ram, cache, or CPU, and for that reason, I don’t know how to stop it from happening.  I should

As of June 17th 2026, the tools and edit is not working I don’t receive an error but the menu bar is just blank sometimes it’ll come up, but when I hit “organize” the next screen is blank I’ve done all the things.  Updated, uninstalled, reinstalled.it’s still happening  

Hi everyone, I'm a podcast editor working with AU on a Dell notebook that seems to have a pretty solid configuration for the job. However, I constantly have performance issues that annoy me and slow my workload down.I would like to understand what might be causing this and if there is something I could do to minimize or prevent this from happening. The main problems are: a short lag when I move several clips on the timeline at once and a tiny delay between pressing play and having the audio to be reproduced.I usually edit shows that run from half an hour to one hour. Our main product is a daily news podcast, with two hosts, one interviewee (sometimes two), and a track for actualities. soundtrack does not run through the entire show, only as bg for the opening and closing sections and for short moments between segments of the interview.One action I use quite frequently is "selecting all clips after / before the played" to move them where I need. I know "ripple delete" has a similar effe

Hi everyone, I am trying to understand my turntable’s frequency response and to this end I have a sweep from the CBS STR 100 record.The sweep (for each channel) is constant amplitude below 500 Hz and constant velocity above that. I am trying to find a way to spot the gaps in the frequency response but on the volume curve there is a line rising up to 500 Hz and descending after that (as it should!). How could I tell Adobe Audition to show me the exact frequency response curve please? Is it even possible? Thank you!