Audition

Hello. I am a voice actor who records in mono with 4800 sample rate and a bit depth of 24. Lately I am getting am incessant click-click-clicking on all recordings! A noise reduction takes care of most of it, but I can still hear it at the beginning and end of  pieces of vocals. I’ve tried rebooting my Macbook, rebooting Audition, unplugging and re-plugging all wires, and changing sample and bit rates. Nothing seems to work! I would ne greatly appreciative if someone could help he get rid of this problem. Thanks so much. I’m attaching a screenshot of the spectral Frequency Display so you can see a visual of the problem.  EDIT: I’ve just discovered that the problem DOES NOT HAPPEN when I use my laptop’s built in microphone!! My audio converter is only about a year or so old, the mic is about 6 years old 

I have a .csv listing my marker names, start, duration, cue, and description.The .csv should be able to be imported, but Audition refuses to accept it. So I have a few questions:-Can the markers be imported to a session?-My timeline is BPM, does it have to be a timecode, like 00:00:00? My spreadsheet is BPM such as 15:1.00-What are the columns named? I have seen so many varieties, some with an "end" column some without, etc. Does anyone know the exact column names and which ones we need?-Is there an easier way to make markers in a session? For my current project I would like every quarter beat to have a marker, but doing it by hand seems so unnecessary and time-consuming.

I have created 60 tracks in a single multitrack session. I want to save each track as a separate .aiff file. What is the best, most efficient way to do this? 

Ok, couple months ago, the mandatory computer update happened.  Adobe Audition would not open.  After 3 computer techs, and an online “Answer guy”, and after uninstalling and installing drivers for M Audio 192/6 several times, I can open the program, but I’m not getting any sound out of the normal M Audio settings on the interface.  I can hear whatever I’m inputting, and I can record it, but it comes out in mono.  If I turn the USB/Direct knob off, there is no sound.  If I open a previously recorded session, everything appears normal - everything plays, pannings are there, stereo’d tracks are stereo.  So, no sound unless I turn up the USB/Direct knob, and anything I listen to or record will be mono.  I’ve exhaustingly looked at the Hardware setup, everything looks normal, same for the computer sound and speaker settings - everything looks right.  This is after about 3 years and hundreds of sessions without problems.  Only after the update did all this bs start.

So, I edit audiobooks, and a big part of this is going through the playback and making minor adjustments as it continues to play. I have been using Audition 2017 for years but I recently upgraded to 2024 because 2017 has all sorts of weird bugs that cause it to crash.  Mostly everything is good but for some reason in newer versions they have changed the auto-scroll behaviour, such that if you take any action during playback, it disables auto scroll, and you have to re-enable it by pressing A.  This is infinitely infuriating because it means every time I delete a little space or paste a selection in, the auto scroll pauses and unless I press A every time, the cursor just trails off the end of the screen.  This change is not at all useful and is merely a nuisance.  How can I revert the behaviour to the intuitive way it used to be?  (And if it’s not possible to revert to the old system, can you please add a toggle to the options menu so that it is possible?) Thank you. 

Mac Audition 2024. If I try to use batch process with Export checked, it completely screws up the metadata with some random metadata from files that aren't even open. Doesn't matter if a favorite is selected or not. I don't even know how it's finding that metadata to load. The temp and media cache locations have been completely cleared.

I have to think this is a bug. When I edit and save something in Audition, instead of just adjusting the Data Modified and keeping the Date Created (like Izotope RX and XLD do for example), it overwrites the Date Created with the current date/time. I can't have this happen. What's going on?

I use Ozone as a VST inside Audition and have a bunch of presets saved for tracks I’ve worked on. However out of nowhere they’re all gone.If I make a new preset I see it in the dropdown list.If I look in the EffectPresets.xml file, both the old ones and the new ones I created are there.What happened, and how can I get them back?Intel MacOS Sequoia 15.x, Audition 2026

I have an MP3 file that I imported from atape using reshow cassete.the file contains 14 songs Can Audition recognise each and split in individual files?

I was trying to generate a logarithmic sweep (log sweep) signal. Specifically, I wanted to create a log sweep starting at 50 Hz and sweeping up to 15 kHz over 5 seconds, while maintaining a constant signal level of 0 dBFS from start to end.Of course, I set up a 48 kHz sample rate with 32-bit float. However, when I check the generated file, the sweep clearly exceeds the intended 15 kHz limit and continues all the way up to nearly 20 kHz. Additionally, once it goes beyond 20 kHz, the level drops by about 3 dB and the signal continues at that reduced amplitude.This issue doesn’t occur in other audio editing programs. I also tested it with Python code, and there were no such problems. So I’m wondering — why does this only happen in Adobe Audition?

What is the keyboard shortcut to quickly switch between Overwrite and Insert recording modes in Adobe Audition? I use Punch and Roll for long-form audiobook narration, and right now, the only way I can switch modes is by right-clicking (or control-clicking) the record button and selecting the option with my mouse. A keyboard shortcut would save me a lot of time. Thanks,Dana

Markers is on timeline, but they are all (overlap) on the left of the timeline. I could not find the way to fix it, please help. 

I am editing and mixing an album of classical music that I recorded over the course of a week. I have finished editing every piece, and every piece has its own multitrack session. Each session contains 12 tracks (mics), and each track contains 20-50 splices, depending on the piece. Each splice may reference a different file of audio recorded in the initial multitrack session (there were lots of stops and starts so they could listen back to their takes). I assume this is pretty standard so far. I need to figure out the best way to export these tracks WITHOUT effects and mixing. Since I tend to mix as I go, each session and each track has active effects, gain adjustments, and stereo panning adjustments, depending on the track. I have maxed out what my MacBook Pro can handle before slowing to a painful chug. My goal is to export each track AS IS with no effects, no gain adjustments, no stereo panning. Then, each track will become a single file that I can work with more easily. I can then

This is the my furst day with the bew audition.  I used ver 3.01 until now. Set the program up to use the 'what you hear' device as input.  The levels aree very low and it seems just the noise is recorded?  Wat am I doing wrong?

Audition crashes trying to open Cedar DNS One, which has an iLok licence.. It’s instant, and generates a standard error message. All other VST 3 plugins are fine, and Cedar works fine in Audacity. My Audition is 2024, so should be compatible with DNS

Returned to work from vacation to find Audition had updated itself while I was away. New version is 26.0.0.56 Build. When I try to open sessions I produced in Audition 25.3.0.71, Audition comes up with the Can’t find all Media pop-up and wants me to link to the Media. When I try to link media (even if I manually try to link the media by right-clicking on the clip and selecting Link Media, it doesn’t work. I cannot seem to open old sessions with the new 2026 version. In my workplace, (radio station) I have to save all sessions to a OneDrive, accessible to all producers across the country, so anyone can work on anything. I have not tried to open an old session from my local HDD. (yet) I have reverted back to Audition 2025 so I can complete my work. Audition 2025 still opens everything normally… even from the Company OneDrive. 

My Mac is hanging when attempting to open any audio app.When attempting to open any Audio app on my Mac, i’m getting very long stalls.Audition stalls at “Initializing (AUui)” but will load after about five minutes.Reaper stalls at “creating Midi client”...I haven’t waited to see if it eventually opens.GarageBand opens, but reports “Error initializing CoreMidi” and warns “MIdi Services not available.”and the Apple Midi Setup stalls when Window>Show Midi Studio is chosen. I’ve cleared any caches I could find, deleted prefs, and replaced my Library/Audio folder with a TimeMachine backup, but the issue persists. I’ve unplugged my vocaster and my Korg nanoKontrol and deleted midi drivers. Any tips?Apple M2 Max,  OS 15.7.1

In Audition 26 (and for some unknown amount of time), clip markers are not functioning as expected, and the menu commands provides incorrect guidance.Here’s a video explaining and demonstrating the issues: https://screen.studio/share/Fy5mcjfb 

I have a Steinberg UR22C that can operate as both ASIO and MME.  When operating as ASIO, Audition will stop recognizing the interface after applying a spectral repair operation with iZotope RX Connect. It didn’t have this issue a couple days ago.  I perform these steps as follows before it stops recognizing the interface in ASIO mode:I switch from the multitrack view to waveform view I highlight the section I need to repair, choose iZotope RX Connect in the effects list, and hit apply The track opens in iZotope RX, I perform the repair, and click Send Back I open iZotope RX Connect again in the effects list, then hit apply The waveform is repaired, but when I switch back to multitrack view, Audition will stop recognizing the interface in ASIO mode. If I close Audition, unplug/replug the interface, and open it again, it will recognize the interface, until I perform the operation above again.  It does not seem to exhibit this issue when operating in MME mode, but this mode is not a viabl

I will got to the waveform editor, select the section I need to edit, and apply the RX Connect Repair plugin.  I edit my clip, send back through iZotope RX, then click apply for the changes to set.  After the changes are applied, Audition will stop recognizing my audio interface.  I will have to close Audition, unplug my device, plug it back in, and restart Audition.  I will usually have to reset it in the device manager as well.  Starting happening after a Windows 11 update.

26.0.0.56Every time I open *.aac files, it cuts off part of the track at the end. Sometimes it's a few seconds, sometimes several dozen seconds.

In multitrack editing, if you use audio track stretching, the wave is displayed incorrectly when scaling.In my work, I need maximum precision down to the beat, but due to a display bug, I cannot achieve this, since at one scale the wave is in one place, and if you change the scale a little, the wave is already in a different place.This bug was not in version 2023, but appeared starting from 2024Windows 112023 23.6.1.32024 24.4.1.3 

Audition completely unusable. It launches, displays the Learn Panel, and then freezes within 5–10 seconds. The UI becomes unresponsive: Menu items turn gray, the Learn Panel shows a blue highlight border, and the application stops, freezes my entire system & requires a hard reboot. This happens with every single launch, even after “clean” reinstalls and resets!I have fully uninstalled Audition, Creative Cloud, and all other Adobe apps. I have manually deleted all Adobe folders in Program Files, Program Files (x86), AppData, (Local and Roaming) removed leftover CEP, CEF, and WebView2 components, and reinstalled cleanly.Additionally, I have deleted all workspace files (except a custom “NoLearn” workspace created to attempt launching without the Learn Panel,) and edited AuditionPrefs.xml to disable it and set NoLearn as the default. I have deleted recovery files after each crash, and even attempted Shift‑launch to bypass previous sessions.Further, I have renamed Learn Panel extension

Hi, yes Audition 26 makes wat should be an easy peasy job into a nightmare. It looks like a beta version, not ready to be released yet. It is messing up my files, my work too and deeply regret to have uninstalled Au24 and Au 25. The last sweet event was yesterday. Using AU 26, I opened a file I recorded using a Zoom handheld recorder and began to edit it, then suddenly,  Au26 froze, it was ciclying doing something for a long time, closed by itself and when I opened the file again to work on it,  Audition 26 had done 4 things:1. it mixed up that file with another one I had on the same SD card, inserting it in the middle of my working file.2. It deleted the last 5-7 minutes of the original audio file AND3. It created another one with few seconds of the original one, with a greeting, repeating it in a loop for 29 minutes. 4. There was no back up savedNow, the initial file has to be on air tomorrow and I am on leave but working, using file recovery applications trying to find any copy on t