FrameMaker

How do I set monitor (scree) size in FM17 so that at 100% zoom the page is displayed in exactly the size set in Format > Page Layout > Page Size. This used to be available in versions up to 11 as a setting in Preferences or maker.ini as MonitorSize= if I remember correctly. It’s not there anymore and I don’t see any references to this anywhere. In FM11 I used to be able to compare a printed page to the displayed page for checking the margins, etc. I can accomplish this by setting a custom zoom setting, say 157%, but the other percentages won’t be clean numbers showing % sizing compared to full size.  

I am editing a New Testament translation and I need to revise some of the verse numbers. They are seperate from the body and I can't figure out how to get to them. Any suggestions?

I purchased a license of FrameMaker 17 education, assigned it to a user (myself with my email, which is the same as my Adobe sign-in email), and installed FM. When I start it, it’s offering a 30-day trial or to buy it. The Buy page doesn’t recognize that I have an FM license assigned. How do I activate FM? If I go to the admin console under my login, I can see the license as provisioned and it’s assigned to my name with the correct email. Under Products, it says Access Assigned under Adobe FrameMaker. Thank you for your help.

wie kann ich in FrameMaker eine Schrift nutzen, die ich in der Creative Cloud herausgesucht habe?das habe ich gemacht:So installierst du Schriften aus der Creative Cloud (Kurz‑Anleitung)1) Creative Cloud Desktop öffnenCreative Cloud Desktop App starten und das Hauptfenster öffnen.2) Schriften‑/Fonts‑Bereich aufrufenIn der App den Bereich „Schriften“ / „Fonts“ öffnen und nach der gewünschten Schrift suchen.=> Schriftarten durchsuchen => Schrift gefunden, dannBereits in Bibliothek gespeichertDiese Schriften sind bereits in der Bibliothek „Ihre Bibliothek“ gespeichert.[warum da schriften steht, obwohl ich nur auf eine klickte, verstehe ich nicht]In Creative Cloud Desktop werden keine Schriften angezeigt..wie komme ich weiter?VG Thomas 

When publishing my book to HTML5, the first 3 chapters of the book publish correctly in the left pane in HTML 5 generated output.  However, the remaining chapters all populate nested under the 3rd chapter (see below). How do I solve this?  Chapter 1Sub sectionChapter 2Chapter 3Sub sectionChapter 4Sub sectionChapter 5

I am working in a document repository connected to SharePoint online. I select Checkout and Edit, work on my document, save (continuously), Checkin the document and everything seems to be working fine.  That is until I go back to the file and half my changes, if I’m lucky, are not there. More often, nothing is saved. This is the third time I have tried to create a document and it’s now beyond frustrating.  So what am I doing wrong?I haven’t worked in FrameMaker in over a decade so go easy on me :-)

I am generating a List of Authors and I want the First or Second Name to be bold. But I can’t make it work properly. This is the Marker dialogue and I have tried adding code for a character style called “Bold”. And also, this isn not working. I believe I CAN make it work, but I can’t remember how?Any suggestions?   

I've just starting working with VS Code. I've been using ESTK. I have both Adobe FrameMaker 2019 and Adobe FrameMaker 2022 installed, but typically, we just use FM 2022. My launch.json looks like this:{ "version": "0.2.0", "configurations": [ { "type": "extendscript-debug", "request": "attach", // "name": "Adobe FrameMaker 2022—-main", "hostAppSpecifier": "framemaker-17.0", "engineName": "main", } ] }But if I click eval in Adobe, I still have to select FM 2022 from the drop-down.Possibly related, I don't recall setting a workspace, I just put the launch.json file in a .vscode folder beneath my scripts folder. Perhaps that is the issue?Thanks in advance!

I got the classic book vs. file numbering error while updating a book. I checked the box to hide the messages for the rest of the update. I’d like to turn it back on. I could swear it used to be in Preferences > Global > Alerts, but can’t seem to find it. Does anyone know how to get to it?

FrameMaker 17 fails to install on two machines. When I run set-up.exe on a Dell laptop with Windows 11 Education, I get a message “You need to turn on User Account Control first”. I will talk to our IT support. When I run set-up.exe on a Macbook Pro with M4 chip, Tahoe 26.3.1 and Parallels 26.2.2 with Windows 11, I get a message “Installer is corrupt.” I read in posts from 2021 that FrameMaker doesn’t run on Apple chips, so this may be why? Someone suggested running set-up.exe silent=1 in cmd in admin mode. That didn’t help. Please help.

I have an old perpetual license for FrameMaker 11. It refuses to load as of yesterday, saying the serial number is already in use by the maximum allowed computers. Note it was running fine, then suddenly it stopped. I think it was after I’d updated my macbook Pro (Tahoe 26.3.1, Parallels 26.2.2, Windows 11) so maybe somehow the Adobe Application Manager thinks this is a new machine. I lost access to one activation several years ago when a laptop stopped working and I recycled it. I’ve tried getting adobe to reset my activation count, but multiple chats resulted in agents not understanding the problem (they refer me to resetting activations in the ‘internal dashboard’, and of course FM isn’t on the Adobe dashboard) or just dropping the conversation. I wrote to techcomm@adobe.com and tcssup@adobe.com (also about not being able to run the FM17 installer), but haven’t heard back. Thank you for any suggestions you may have.

DITA and FrameMaker. We have two different layouts for same information. One template for one column layout and another one with two columns. Despite the template, tables should spread in all columns. One column template works fine.We have made a two column layout with same table style but spanned for both columns. The table is anchored in Body paragraph with format: one column. If I insert a new table, it will be formatted correctly to all columns. But if I open the converted DITA document, tables are in one column.I added a new paragraph format in template with ‘all columns’ layout and changed the edd to use that in table anchoring paragraph style. It does, but still the table does not span in all columns.What have I missed? Thank you in advance.

I am using an autonumber format that is not incrementing the n variable within the same file. The autonumber format is F : Figure <$chapnum>-<n+> \sn. The first instance numbers properly, to wit: Figure 2-1. A second instance of the paragraph style delivers Figure 2.1 again. It appears that the n value is not getting updated. I have made sure that the paragraph numbering property is set to “Continue numbering from Previous Paragraph in Book” and I have updated the book innumerable times.This is happening with all numbering series: F for Figures, T for Tables.Anybody got any ideas?Thanks in advance...Bill

My company gets PDFs that we have to insert into our manuals from an outside vendor.  These PDFs have hyperlinks in them that need to work in the final PDF.  We *thought* they were working in the output, but it was just Acrobat identifying URLs.  The PDFs are regulatory and are updated on a frequent basis, so trying to recreate them in Frame probably isn’t an option. Is there a way to save PDFs with the imported PDF links working?  I also tried converting to SVG, but no dice. Thanks.

I want to export a FrameMaker book as PDF (or some other format) and retain the names of all the embedded images. My company needs several user guides ultimately converted to Markdown for use in a custom LLM. Currently, the LLM returns text but skips over any and all images unless the image is specifically referenced in the text (see image below, etc.). Is there a way via a plugin or script to accomplish this?

Hello,I would like to create a character designer adding automatically “underline + quotation mark” to a selected text. How to do it ?

Hello,I would like to set the default quotation marks in FM to this type of quotation mark. How to set it in preferences ? or set it in a specific FM document ? 

Hello,I would like to create a character designer that could add a parenthesis at the begining and at the end of a selected text. How to do it ? 

Hello,In this example (at the blue lines), I have set 2 paragraphs styles (“Cantate début” and “Cantate”).You can notice that at the end of each paragraphs concernig “cantate début” and “cantate”, there is no dot. How to set “cantate début” and “cantate” in order to add a dot at the end of each paragraph ?  

Hi, I am new to Adobe framemaker & i have a set of word document which i want to convert it into framemaker document. After importing the word document, all my images are enlarged, different to that appeared in word format. How can i import both content & image without disturbing the image size. I have prepared a standard template but the problem is the image getting enlareged after import. Please help!

I am working in a FrameMaker (version 17) book and the lists in my text insets in one of the FM files unexpectedly changed from bullets to numerals:  I checked the source file that contains the text insets and the lists show bullets as expected:  The numbering in the two other FM files (Spanish and French) is correct.  Important things to note:I did not create this book, so the text insets were already there. The source file that contains the text insets is used across multiple FM projects and I checked other projects and the numbering is fine. When I select a text inset property in the impacted FM file, and go to Edit > Text Inset Properties > Settings, this is what I see: I’m sure I’m missing something obvious, but there has to be a way to revert the lists back to bullets without too much re-work. Thank you.

Hello,In this example, at the bottom, I have several bullets (see blue line) where I have not used some tab stops.Do you advise me to use tab stops in that case (for these bullets) ?  

Hi there,I have a big problem,I am trying to use Neural Filters on Photoshop, specifically smart portrait with eye direction but every time I do I get this error I attached. I tried log out and in, I tried unistall everything and reinstall, I also tried removing the Neural filter plugin data from the library. Still same problem. Please help because I really need it, fast.Alessandro