Adobe Media Encoder

Hello everyone, I am a stage manager at a ballet company where we utilize videos from rehearsal quite often. After we film something on our camera, we put the file through Media Encoder so we can have an mp4 file that we can then share with choreographers, directors, dancers etc. Every so often, the audio is out of sync by a second or so in a video. It is not consistent, does not happen during every video, and sometimes it is only certain parts of the video that become out of sync. Does anyone know the best settings to use to prevent this from happening? Unfortunately, the audio even being a second off can be a major issue for rehearsal purposes. Here are the basic settings I am currently using: H.264VBR 2 Pass10x12 Video Bitrate334 Audio BitrateMaximum Render Quality Any suggestions would be extremely helpful!

I have been rendering my videos using software for quite some time. Today I decided to switch to hardware encoding. I had to play around with my console as my hardware encoding option was greyed out. I managed to get it working and the first render went smoothly. It took about 16 minutes (on software I needed at least 50 minutes). Turns out the final result is just a mess, it's all wavy/striped. Using this clip in some other programs such as Topaz Video AI green lines appear. The video itself is not silent.I've switched back to software encoding to see if that's why this is happening. - everything goes back to normalI restarted my laptop - no changesI updated my GeForce drivers - no changesI mess around with settings such as profiles - no changesMy rendering settings:H.264 - Main - 4.2 1920H x 1080W px 60fps30Mbps VBR 1 pass,Max rendering quality, Max depth - both checkedMy laptop specs:Dell G15 551016 GB RAM DDR4RTX 3050 4GB (codename: GN20-P0)Intel i5-10200H 2.40GHzSoftware:Wind

Buenas gente, quisiera saber si a alguien mas le pasa o le paso.  Que Media enconder renderiza exageradamente lento. Antes no me sucedia, pero ahora exportar un video en full Hd de 8 min me tarda mas de 2 hs!!! Tengo una 3070 y un i7 de 12va gen y 32 gb de ram... Es decir q deberia andar sobrado, ya he probado de todo, desinstalar e instalar devuelta, bajar driver de nvidia studio, borrar cache, fijarme que este renderizando con la placa, tiene 24 gb reservados solamente para los programas de adobe, cierro todo lo que me pueda consumir recursos y aun asi tarda una barbaridad... La verdad ya es frustrante, alguna solucion extra??? Que no sean las tipicas que se venn por todos lados, algo q realmente funcione

I changed PPro from 24.6.3 to 25.2.3 and therefore also went from ME 24.6.3 to ME 25.2.When I try to render a video using the option "Send to ME" ME is activated and the render job vcan be seen in ME's queue. Once I start the render process in ME ist stops after a while returning an error as can be seen below:  Fehler beim ExportFehler beim Kompilieren des Films.Fehler beim Rendern von SoftwareSoftware-Effekt gab Fehler zurück.Schreiben mit Exporter: H.264Schreiben in Datei: V:\Projekte\Provisorium\Titel_1.mp4Dateityp wird geschrieben: H264Um Timecode: 00:00:05:03 - 00:00:05:12Rendering-Effekt: AE.ADBE TextRendering bei Offset: 0,080 SekundenKomponente: Text vom Typ AEVideoFilterSelektor: 11Fehlercode: 512 When I try to render the video directly from PPro it is successful. Any help on this? 

Hello,I've been using crop presets to make Retail screen exports. (splits a 16x9 video into 4 9x16 videos) The latest update has broken this crop feature.It still works if i build the crop presets on my machine however when I share them with another user it no longer works and just defaults the crop to the center.I've included a google drive link for assets to test.https://drive.google.com/drive/folders/1WqCvs135gR757TpGMfEn2MEJh2Xmj3P1?usp=sharingAny ideas?The obvious solution is to have an older version of media encoder installed for the presets/watch folders, i'm trying to refrain from doing this as multiple users will be effected. Cheers

Hi everyone,I recently upgraded to version 25.2, but after installing it, I found that the program wouldn’t launch at all—nothing happens when I click the button, and there’s no loading screen either... Even worse, after uninstalling and reinstalling version 25.1, Media Encoder still won’t start. The 25.1 version used to work fine on my computer before.I’m wondering if anyone has a good solution for this?Thank you.

This started happening when I upgraded to 14.8, but Media Encoder seems to be continually running in the background on my PC and will not let me terminate the process. Because of this I can't do things like delete or move files I've rendered with it, uninstall/re-install it or update/downgrade it since it's considered still running. I've tried the Adobe Clean Up tool, force-kill with Command Prompt, terminating with Task Manager, restarting the PC; nothing seems to work. Don't know if my PC specs are needed but will include just in case:OS - Windows 10RAM - 32GBCPU - i7-8700KGPU - GTX 1070 Ti

I keep creating a new preset based on HQ108p but crucially switch the captions to none.I have several videos queued and either when applying this preset or in the middle of the output process, some videos export with burnt in.  The number of times I have created a new preset only to exhibit the above.Any ideas as to why? NB: the videos also get exported low res with sidecar and this works fine.

I'm trying to export a .ts file but it only allows a .m2t file. The video playback system in a hospital only takes a .ts file extensions. I'm choosing:Format: MPEG2Multiplexing: TS What else???Any ideas?

"error": {"code": 401,"message": "Request had invalid authentication credentials. Expected OAuth 2 access token, login cookie or other valid authentication credential. See https://developers.google.com/identity/sign-in/web/devconsole-project.","errors": [{"message": "Invalid Credentials","domain": "global","reason": "authError","location": "Authorization","locationType": "header"}],"status": "UNAUTHENTICATED"}}Help meAlthough I tried searching for related topics, I couldn't find a solution that completely solved this problemWhen I render and publish to YouTube: Small files work successfully, but high-capacity files show the same error.

I am using Windows 11 Pro, and everything is updated to the latest version, including firmware and BIOS. My sound system is the Asus ROG Strix X570-E Gaming, utilizing onboard sound.I have noticed that Adobe Media Encoder (AME) does not save the ASIO renderer, and it seems that AME does not even use it at all. However, my onboard sound works perfectly with other programs, such as foobar2000 with the ASIO plug-in. Tech Specs

When rendering a h264 mp4 through media encoder my video looks broken in certain areas as you can see in the screenshot. It just clips some dark colors. What can I do? This is realy bad as it is really subtle but plain broken. 

I am using After Effecs CC and I am trying to open the .aep file in Adobe Media Encoder CC (to export as a MPEG file).  I am getting an error stating: "Could not connect to Adobe After Effects.  Please verify that Aobde After Effects and Adobe Dynamic Link components are installed".  I have both AE and AME open and running.  In the menu for AE I have the Dynamic Link menu available.  However, when opening the .aep file in AME I always get this error.-Dave

Encoder updated last night I believe and all my presets were wiped. Now when I use ingest it will not encode to a destination even just my desktop. Log says "Cannot find location" Attached images.

Hi all - Hoping to find a solution to save me time. I have two videos built in Premiere that share assets, one built in 1x1 and one in 9x16. Both of these videos have a .psd file in them that contains a date. I need to create this same video in both aspect ratios for roughly ~30 dates. The issue I run into is if I send to media encoder, I need to wait until all files begin encoding before editing the .psd file or the asset gets updated across all the files previously sent (I learned this the hard way.) Ideally, I would like this to be my workflow: (Update .psd file with date > send to media encoder > update .psd file with new date > send to media encoder) times x, and then > encode.  Currently, I have to update .psd > send to media encoder > wait to encode > and repeat. As you can see, this takes significantly longer. Any ideas? Is there any way for the .psd file to be saved to its last state before sending to the encoder, and then it

Hi, I'm trying to automate transcodes of ProRes RAW material by using either Premiere or Media Encoder.Currently, my best option is to use a source effect preset in Premiere to set the source color space and then apply a LUT on export. It is a bit of a manual process though and I'd like to write a script to do it automatically.The best thing would be to just use Media Encoder and not have to involve Premiere at all, but I can't change source settings of multiple clips at once.I was looking through the scripting documentation for both Premiere and AME but couldn't find a way to change the source color space. Am I missing something?

Recently upgraded to Premiere Pro 2024 across 3 edit suites at our UK broadcast place.We have different generation Macs and playout equipment but the results are the same.We've experienced audio glitches whenever we export through Media Encoder at every audio edit point that doesn't have a cross fade or effect on. This includes cuts that are just 'thru edits' (part of the trouble shooting test)Where these cuts are on the sequence corresponds with audio dropout of approx half a frame on whatever audio track has the edit. These are audible dropouts despite the tiny size.This is manifesting across all suites (Studio, iMac, MacMini in Monterey and Ventura) and using a number of output formats: XDCAM MXF, ProRes, Wav, AS11All create the same result on every (hard) audio edit point.Our workaround is to export direct from Premiere Pro as that doesn't seem to create the same issues - but that then precludes the use of ME entirely and makes the workflow quite tricky.There is also another glitch

I am editing my videos on a NAS system with proxie files and attached offline media files.But I cannot export these timelines in Media Encoder. I get a warning that there are missing media files (original UHD files), but I can export every single timeline directly from Premiere without any problems.So I guess this is some kind of bug?I am using an M4 Max Studio with the latest Premiere / Media Encoder version 25.2.3 / 25.2.

Hi everyone,I encounter an issue when rendering a video from Premiere Pro via Media Encoder. The error can be seen in the attached image. Sometimes, I only need to close the Encoder app and reopen it to continue rendering, but other times it requires me to restart my computer to proceed. This can be very inconvenient at times.And sometimes, after closing and reopening the Encoder app, it remembers the links that haven’t been rendered yet. However, other times, it deletes all the links that were either rendered or in the process of being rendered when the error occurred.Can anyone help me fix this error? Many thanks.  

Hallo, ich versuche seit zwei Stunden, ein Video über den ME zu exportieren. Nach nicht mal einer Minute hängt sich der Encoder (jede Version davon) auf. Es ist zum rasend werden. Es ist nicht mein erstes Video, alle anderen haben funktioniert. Seit dem letzten Update ist nix mehr zu wollen. Er friert einfach ein (keine Rückmeldung) und ich muss ihn schließen. Kann mir jemand weiter helfen?

hiim trying to export a video for use in a unity3d ipad app, and im having trouble getting the colour to export correctly.  My video ends in a particular blue colour and ive so far been unable to get an export out of media encoder that will give me the same blue as in the source. would somebody be able to suggest some settings i could tweak? thanksNick

I'm trying to make a time lapse video from still  images from a dslr.   When I stitch clip together, jpegs are 5 seconds long. please advise. Thanks F

Hi,I have a large clip (1-1/2 hours long) I have exported via ME as 4K and it corrupts the finished file after around the 2 minute mark. ME completes the export but with the corruption.I have tried a second time only to receive the same issue.What are the best practice work arounds for solving this issue?Is there a cache file that I should consider deleting?I'm currently rendering the entire clip and hope this helps remove any issues.

I keep trying to export a h.264 but AME keeps exporting an empty mp4 and an xmp file. Is there any way to merge the two or fix the issue?