Audition

Hello, is Audition have a feature to select all track keyframes, but not only all envelope keyframes. What is best solution to move clips in track ot tracks with all their automations?

I've always been able to edit the Waveform file in Audition - simply deleting selections within the file. For some reason, it's now not allowing me to do this - can anybody explain what could be the cause of this? Screenshot attached

I have Cool Edit Pro installed on my computer for my recordings and karaoke stuff. I have been getting a message stating that there is no output device installed on my system...everything saves to my external hard drive and I just recorded two songs prior to getting the error.Can someone help me figure out what is going on? Tonya

Hi everyone, It says that my “ Auditions primary temp volume is low on space. Freeing up space or specifying a different volume is recommended. Would you like to review Auditions disk cache preferences?” So I click "yes", But I when hit "browse" and I create a file in my external 5TB and designate that folder as the location to save it, I still get that message when I start up Audition and it closes down. Anyone else run into this issue and know a work around? Thanks for your help everyone.

I just upgraded to a brand new laptop through work. The laptop is brand new and has 16GB of RAM. It runs Windows 10 and I use Adobe Audition 3.0.  Almost everything on this laptop works better than what I previously had.  Unfortunately, Audition doesn't run well at all.  I get many "not responding" pauses.  I've also had the program get stuck in a loop while trying to do a simple time squeeze.  I eventually had to force reboot my laptop because I couldn't do anything to stop the endless looping.  After reading some previous posts, I've seen people say Audition 3.0 doesn't really click well with Windows 10.  Those posts were from last year.  Has anything changed? Are there any tricks to make it run better? Right now it's like trying to walk through a muddy field. Slow, frustrating, and I'd rather be doing anything else.

I have Windows 10, Audition CS6, I some times need to record Audio from the Internet. I had an older version of Audition CS4 or CS5, I believe it has a Capture Button used to Record from the Internet, I am not seeing this feature in the CS6. I was able to record from the internet no problem with my older version of Audition, my old disks got damaged from a move and wife discarded.   I am using another program to record what I need from the Internet, but purchased Audition so I can work in one program. Does anyone know if CS6 Audition is capable of recording from the internet?? If Not, Does anyone know the last version of Audition that does have this feature?? CS4 or CS5.5?? Are either of these versions available for purchase?? Thanks for your Help.   Moving from Using the Community (which is about the forums) to the correct forum... ModTo ask in the forum for your program please start at https://community.adobe.com/

Good day, all. I'm the chief engineer for a radio station group, and our production room computer is having an odd issue. I believe the audio playback and .vis file get corrupted relative to one another, the result is that the playback cursor will be over a blank section of the visible waveform, yet audio is playing. The problem will sometimes manifest as a visible waveform with audio displaced in time, or no audio.  It's a Win7 Pro machine, 32 gB ram, 1TB drive, ver {audition CC build 11.1.1.3} I managed to reproduce the error by recording a short test bit (15 sec or so) and doing multiple operations on it- reverse, reverberate, compression, echo. At this point, I was seeing the symptoms described above. I can attach the .wav and .vis file if anyone wants to see them.Thanks.Jim FrankChief EngineerCCR IV LLC 

Why is the paintbrush for Adobe Audition grayed out? I understand that some tools are only available in Multitrack Mode, but the paintbrush is used for altering the SPECTRAL AUDIO! It SHOULD be available to use in Waveform mode.    And even when I go into Multitrack mode, it is STILL grayed out!   Why is this and how do I fix it?

Hi All This is kinda strange.  We are recording with a Rode NT1-A mic and a PreSonus AudioBox iTwo and an iMac. The first recording session we recorded in Garageband and the playback levels were fine.  Loud and crisp.  The second recording session we recorded with Audition (build 14.4.0.38) and it was very quiet at playback.  Cranking stereo to max and it is still soft. Keeping all things the same we tested back with Garageband and it was fine. The recording levels while recording were set approprietly on both. I have confirmed system requirements and all the device settings and it appears OK.  Updated drivers. Any thoughts? 

I have a customer who is asking for my help in creating Auto Attendant Voice Prompts. He has given me the detaied settings that are required to make the voice prompts usable on their phone system. What I need to know is whether or not this is even doable in Audition. I don't think it matters, but I would be doing the work on a 2019 Macbook Pro. Here is the information I was given: It is possible to record the Auto Attendant voice prompts using a computer, save them and then load these recorded prompts to the XBLUE IP system for use in the menus. Doing so requires that the files be stored in VOX format as:Dialogic (VOX)U-Law8000Hz (8KHz)64kbpsMonoFile size no greater than 300k Thanks for helping me figure this out!

Other than using Pitch Shifter, does anyone know of a good way to make an adult voice sound like a kids cartoon voice? Thanks

Match loudness problem. ITU-R BS.1770-3 Loudness. After I run the match loudness it no longer shows the ITU LUFS.  It begins with Total RMS   Peak   True Peak  etc etc but no LUFS  I think this updates daily and I sure hope that did not go away,

I can load tracks into audition, but when I try to play the tracks the cursor will not move and no audio will play. Anyone know what the problem could be? I try to change the Audio Hardware in preferences but it didnt work, and I use Windows, If anyone could help meee

problem with play button,when i press play the program does not respond

Huge apologies if this is posted elsewhere, but I can't seem to find: if my track has a uniform effect (e.g. echo), is there a way to remove from a single track? The right click tactic doesn't work — there's nothing that pops up with that option, not even gray (photo attached). Is this possible or do I need to create an entirely new track?

Hi, all. I just moved from Audacity to Audtion and am trying to figure out how to automatically arrange tracks end to end. This is quite simple in Audacity, but I can't figure out how to do it in Audtion. Thanks for the help. 

Just read about vtml tags that can add emphasis and pauses to make TTS sound less like a robot.I've tried it out in Audition CC and it seems to have no effect.Example: <vtml_pitch value ="150>Fact</vtml_pitch>: <vtml_pause time="500"/>Employees who are auditory learners, train faster and more effectively, by listening to iSpeech text to speech, inside of e-learning courses.Am I missing something to make this work? If the feature isn't available in Audition, what other tools would provide the service?

I BOUGHT Adobe Auditon 2.0 off ebay I have serial and I can not Activate it! 

I'm new to audition. I formally used vegas video. With Vegas I had an explorer window and I could click on and hit spacebar and it would play the audio is see if it was right for the commercial. Can I do that with Audition?

Hi all, I'm editing a podcast episode and I don't want to go through and individually cut out every excessive breath I find, so I'm trying to find a setting in my expander that will effectively remove said breaths. The issue I'm running into is when trying to experiment with settings to remove breaths, I'm also forfeiting some of the speech audio's quality, and I can't seem to navigate the solution to this. Should I try to use some other effect in tandem with the expander? How can I accurately guage the ideal settings to use for removing breaths? Thanks in advance!

I cannot seem to find the shortcuts file for my custom keyboard shortcuts. I would like to get this file transfered to another computer so that I can work with it. But the first step is finding it on my first machine, which I cannot do. Thank you for your time and help. 

Because when I open a saved session, it doesn't give me the option to record?

as I work on my project audio is dropping out during playback the issue is that it also keeps dropping in the saved file afterwardsI am running on 2020 macbook pro what shall be the issue ? 

HelloI've installed a few third-party plugins, and some of the presets are available and some aren't.In particular, MCDSP installs fine, but no presets show up in the list, while Waves plugins presets do show up in the drop down list. I've worked out that all presets are logged in the EffectPresets.xml file (located in preferences), and even tho I can see the individual McDSP presets.xml files, but they're not saved in the 'EffectPreset.xml' file and therefore do not show up. This is very frustrating, and have been trying different things for 2 days. Is there anything I can do, or is this just a manufacture issue? any help would be greatly appreciated. 

Hi, not sure how to describe my issue because I am new to Audition but I am making an intro clip for a podcast and have clips in the host section and music bed section. I have it all perfected and am ready to export it but I noticed when I play the clip back it runs past my last clip (which is in the music bed) and its silence. I'm not sure what this is and why it doesn't just stop after my last clip. Anyone know?