Audition

I tried to search the forums for this but it's a little difficult to word, sorry if it has already been covered and for my lack of experience in Audition! I work at a live music theater with an original variety show. The production crew has given me a video file of the entire show and tasked me with making an audio CD to sell in the gift shop. I am a graphic designer and have the full Adobe suite and I have played with Premiere and Audition enough but am no audio/video editing expert. I have opened the video in Premeire and exported the sound to a .wav file. I open that .wav file in audition and mark tracks, create CD layouts and then burn the CDs. Here is my question: how do I force the CD to play continuously between songs without leaving the 1 or 2 sec gap between tracks? The tracks themselves are exactly aligned and, if you don't skip tracks, you should be able to listen all the way through as if you are listening to the show live. However, the CD player is pausing a second or two

I tried to install adobe audition but my creative cloud says it's "not compatible" and that I should update my mac to a higher version.However I have the highest version, so I don't know what to doModerator: Title changed and moved to Audition forum

Ive seen all the YouTube clips including the Adobe official about how to set up the podcast.Equipment: Blue Yeti microphone, Google meetsmacOS: Big Surlatest Adobe Audition I would like to invite the guest on my podcast from zoom or Google meets. However the host is input set as my microphone. but the input of the interviewers does not have the internal audio as a preset. audio software from preference only allows you to select single option, hence I'm having trouble separating my channel and my interviewers channel. i have blackhole, ladiocast installed but I am not sure how to connect these two into Adobe audition. Anyone can help? 

I use Adobe Audition for music and this year I have encountered a problem with a recorded audio where it sounds like the levels are fine yet there is this constant static sound all throughout the recording. I have updated, un-installed and re-installed the drivers yet the problem is still there, Pls help. I have attached a sample file

Estaba utilizando la aplicación y me apareceió el mensaje de que por ese error no puedo abrirla.  Hice todo lo posible, reiniciar, reinstalar, volver a instalar incluso los archivos en los cuales me marcó error pero no ha funcionado nada. 

For some reason the microphone will only work if I remove my headphones from the interface and plug them into the laptop, but than I get a horrible delay time in my recordings. My headphones will only work from the interface if I use the default laptop microphone, but the issue with that is I need to use my microphone of course. So I have no monitoring, terrible delayed recordings and Everytime I try to set up my Onyx in the audio hardware settings, I get "MME device internal". I've tried everything to my knowledge and yet this issue persists. It was working for the first 20 minutes of me installing the program and than boom. Out of nowhere my DAW just does this to me. I need serious help here please. I'm not too tech savvy guys so sorry if I do a dumb.

Hi everyone, I'm a newbie on Audition and am having a Newbie Nightmare.I have digitised an old cassette tape, of a live concert, from 1984.I mucked about with a few settings and effects, a bit of EQing and a successful stereo widenting (Effects Rack/Presets/Stereo Widwener Wide (Hass effect), and the resulting file sounded so much better.I've tried exporting the changed audion to WAV and MP3 - and in both instances the results sound dreadful. EQ changes are lost, stereo is lost and the original mild distortion has almost doubled.I even tried an A/V screen capture of the whole 90mins of the audio playing in Audition - same result.I know I've probably had the source file too loud, but it DOES sound great in the Audtion build. I have no experience about mixing, but this is driving me around the bend ..... what am I doing wrong??

QUIERO ESCUCHAR VINILOS DESDE MI PC Y PARA ESO ADQUIRI ESTE APLICATIVO, PERO CUANDO PONGO UN VINILO EL VOLUMEN DEL CANAL DE PISTA ESTA DEMASIADO SATURADO, POR MAS QUE TRATO DE BAJARLE EL VOLUMEN SOLO BAJA DEL MAESTRO PERO EL DEL CANAL DE LA PISTA SIGUE SATURADO

I'm using a new laptop with windows 10. I use a Rode NT1 wth the AI1 interface. all the settings are the same, default for the most part. As soon as I start recording I get a constant static at -53db. There's no sounds from anywhere. I can't get rid of it afterwards as it affects the voice as well. Is there something in the settings to shut it down. I don't want to try and fix it afterwards. It never happened in the old laptop, which my wife uses now. when I reverted back to that, everything worked perfectly. Why would I get static? Any tips? Thx

If i am listening to my final audio with the loudness meter in the specific audiotracks (track 1) i get a perfect result, however if the loudness meter from the mix track i get a 3db lowering!there is only 1audio present in this file, no effects (other than the two loudness meters). How can this be?  

Is there a way one can apply a preset one has made from the effects rack to multiple audio clips (extracted files from premiere) at once?

We are bulk processing a lot of soundfiles containing speech, normalizing them to -3dB.Everyone once in a while, something like this happens:  Volume is raised to the max, which causes a very loud distortion. It usually lasts less than a second.The audio is not recorded in Audition. We are on Windows 10.Any idea what might be causing this, and how it can be avoided?

Hello,I have been podcast producing now for  a few years and love Audition.  Every once in a while I notice something that would drastically increase efficiency of editing.  I often edit in multitrack and use the time selection tool to eliminate audio by ripple deleting. I moslty do this very fast with keyboard shortcuts and is primarily used to trim dead space and tighten up the gaps.  As I have gotten more used to visually seeing these gaps, I've grown a huge desire to remove them while NOT moving the playhead to the start of the time seleciton.In other words I want to be able to EDIT ahead of the playhead while letting the playhead run in real time.  I want to use the time selection tool both with and without it being attached to moving the playhead with it. I hope this makes sense and that this can become a discussion.  I would love to be able to listen and remove the gaps in real time at the same time but also be able to move the playhead wi

Any idea why the mixer will not allow the sliders and I can not access any of the features like mastering 

The slack in the remix option is not working. I tried with different target durations and all were off by a lot.Any ideas on what could be the culprit? 

Hi there,I am in the middle of an edit with four tracks on multi track using tracks 1-4. I have somehow managed to remove track 3 but I can still hear it and it is still visable in the overview above.. can anyone help with getting track 3 back? thanks

Hi,I cannot copy part audio in another trackEg. I have a multitrack with movie + track1 + track2, if I copy a portion of the second track and paste it in the first track, this is not copied but you replace the track 1 for the same timeThis problem isn't there with a single track without using multitrackIs there any setting to change or am I wrong something?Thanks

Hi So i am making a 15sec TV commercial, but the speak has a big gap in it + the end subtle music ending in a fade. My problem is first of all that the LU is 3.0.But how would i go about lowering it without it getting all muddy.i think its to much of a jump in the audio level for that short amount of time. This got me thinking that maybe its my workflow thats way of. i process the the timed and cut voice via RX connect (plugin), do minor tweeks in AU, then create a mixdown and run that through match loudness at EBU R128 settings.  

Hello I frequently work with multichannel files, and when bringing them into my editor I often times will extract the files to mono so I can work with each individually.  Although my source files are multichannel, they are not necessarily tied to a 5.1 or 7.1 channel mapping.  Any time I extract to mono, they get assigned a channel such as L,R,C,LFE etc and get rearranged in my editor.  I was wondering if there was any setting somewhere I could disable the automatic mapping to 5.1 and just have the output channels be ch1, ch2, ch3 ext in the order they are writting in the source wav.    

Pluguei o microfone USB BM-800 no meu Imac e ele foi reconhecido.Só que dentro do Adobe Audition ele diz não está funcionando.Diz que é erro de TAXA DE AMOSTRAGEM.Alguém com o mesmo problema?

I have some recroded sounds and I want to play them at different levels:1. 85dB2. 90dB3. 100dB4. 105dB5. 110dBCan someone please help, how to do that I am entriely new to adobe audition.Thanks in advance,

Hello, im using audition for the first, because i need an audio file for a project.I need to generate a tone that changed frequency over time. for instance it needs to start at 330hz and slowly go up to 400hz over time.But i can't seem to figure out how to make this happen.Hopefully one of you knows the answer to this

I am a podcast editor and I use Adobe Audition to edit the audio. I've run into the issue of not being able to keep the sounds level. I manually go in and adjust the volume of the peaks and the quieter spots to make it more level but is there something within the program that I can, say, set the target volume to -16dbs? The audio is stripped from Skype phone calls, and while the host always has a great sound set up, the guest does not always. I'm trying to make the levels as even as possible. Is there anything that can help?

I've recorded something on my computer but want to pass it to someone else to work on (they also have Adobe Audition). How do I transfer the files? 

Telephone support transfered me 4 times then just straight up hung up on me. Their remote login support said i should just reinstall Windows.